硬齿面磨削裂纹的工艺研究
通过在生产实际中对中等模数硬齿面齿轮磨削裂纹进行分析研究,并多次反复试验,找出防止裂纹的有效方法:采用高速快冲程,使磨削在瞬间完成,迅速消除裂纹,可防止原裂纹扩展;刮齿去除法,将出现的裂纹采用硬质合金滚刀刮削将裂纹刮净后,再进行磨齿;二次回火磨削法,对齿轮进行180℃不小于16小时的回火处理,再进行磨齿;喷丸处理消除应力。...
Saved in:
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | zho |
| Published: |
Editorial Office of Journal of Mechanical Transmission
2008-01-01
|
| Series: | Jixie chuandong |
| Online Access: | http://www.jxcd.net.cn/thesisDetails#10.16578/j.issn.1004.2539.2008.04.003 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|