Method of non-destructive control of thickness and internal defectivity of the walls of metal pipe
The possibility of an accurate estimation of the pipe wall thickness measured directly from the reconstructed image of the pipe, reconstructed from only a few X-ray projections made in a limited viewing angle, is discussed. Since the effects of radiation scattering and X-ray beam hardening distort u...
Saved in:
Main Authors: | S. A. Zolotarev, P. S. Savenia, K. A. Zhukov, M. A. Sednina |
---|---|
Format: | Article |
Language: | English |
Published: |
Belarusian National Technical University
2020-09-01
|
Series: | Системный анализ и прикладная информатика |
Online Access: | https://sapi.bntu.by/jour/article/view/481 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Similar Items
-
CLASSIFICATION BY TYPES OF DEFECT «PRODIR» ON AN INTERNAL SURFACE OF HOT-ROLLED PIPES
by: N. A. Glazunova, et al.
Published: (2014-01-01) -
Assessment of factors limiting technological capabilities crimping conical die blanks from thick-walled pipes
by: V. A. Konovalov, et al.
Published: (2019-06-01) -
Numerical analysis of repaired wall loss defect pipelines for optimum composite wrap thickness
by: M. Khaisem, et al.
Published: (2023-01-01) -
Numerical analysis of repaired wall loss defect pipelines for optimum composite wrap thickness
by: Muhammed Khaise, et al.
Published: (2022-12-01) -
PHYSICAL METHODS OF NON-DESTRUCTIVE CONTROL — TO THE QUALITY OF FOUNDRY MATERIALS
by: P. P. Prohorenko
Published: (2007-02-01)