Multi-mode mobile mechanism based on anti-parallelogram and parallelogram mechanisms
Abstract Multi-link mechanisms can adapt to different terrains through deformation, and have certain advantages in terrain adaptability and obstacle overcoming. Therefore, this paper designs a kind of multi-mode mobile mechanism with multi-link based on two anti-parallelogram mechanism units and two...
Saved in:
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Nature Portfolio
2025-07-01
|
| Series: | Scientific Reports |
| Online Access: | https://doi.org/10.1038/s41598-025-13169-y |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Abstract Multi-link mechanisms can adapt to different terrains through deformation, and have certain advantages in terrain adaptability and obstacle overcoming. Therefore, this paper designs a kind of multi-mode mobile mechanism with multi-link based on two anti-parallelogram mechanism units and two parallelogram mechanism units. Firstly, the morphological change characteristics of parallelogram mechanism unit and anti-parallelogram mechanism unit are analyzed, and then obtain the construction method of the multi-mode mobile mechanism. Secondly, the motion screw of the initial position of the mechanism and the screw constraint topological diagram are obtained through screw theory and graph theory, and then the degrees of freedom (DOF), namely the number of drives, are calculated. Then, based on the DOF and the symmetrical characteristics of the multi-mode mobile mechanism, the motion feasibility and motion characteristics of the three motion modes (parallel-like rolling, anti-parallel-like tumbling, and parallel-like creeping) are analyzed. Finally, a 3D printing principle prototype model is made to verify the feasibility of the multi-mode motion and the correctness of the analysis results. |
|---|---|
| ISSN: | 2045-2322 |