-
701
Shear behavior of prefabricated steel–concrete connectors in prefabricated steel–concrete composite beams
Published 2025-03-01“…Abstract Stud connectors are widely used to realize the shear connection of steel girders and prefabricated bridge decks in prefabricated steel–concrete composite beams. However, the dense arrangement of stud connectors in the combined bending and shear region makes fabricating prefabricated bridge decks difficult and weakens their integrity. …”
Get full text
Article -
702
Linear Vibrations Analysis of a Composite Sandwich Conical Shell Manufactured by Additive Technologies
Published 2025-06-01Article -
703
Drop-Weight Impact Tests on Engineered Cementitious Composites heated to 500 oC
Published 2022-08-01“… Despite that concrete is a fire-resisting construction material, its microstructure suffers significant chemical and physical changes when subjected to temperatures higher than 400 oC. …”
Get full text
Article -
704
Study on dynamics and vibration response of shield cutterhead in composite strata based on Hertz contact
Published 2025-08-01“…The shield cutterhead experiences eccentric loads when excavating through composite strata, leading to potential deviation of the cutterhead. …”
Get full text
Article -
705
Slow Translation and Rotation of a Composite Sphere Parallel to One or Two Planar Walls
Published 2025-06-01“…The coupling between the translation and rotation of the composite sphere parallel to the walls exhibits complex behavior that does not vary monotonically with changes in system parameters.…”
Get full text
Article -
706
Evaluating the Effectiveness of Aluminum Coatings on Patch-Repaired Composites Using Electro-Thermal Analysis
Published 2025-05-01“…Lightning-induced ablation can severely compromise the structural integrity of composite materials. While metallic coatings have been widely studied for lightning protection, this study focuses on a different application—applying aluminum coatings to repaired composite materials. …”
Get full text
Article -
707
Preparation of Nanosilver Composite Plant Medium with Antimicrobial Capability through a Nontoxic Method
Published 2015-07-01“…A nanosilver composite plant medium with a good antimicrobial capability was successfully prepared via a two-step method in this work. …”
Get full text
Article -
708
Effects of diamond surface modification and matrix alloying on the thermal conductivity of copper/diamond composites
Published 2022-06-01“…Diamond particles were roughened with Pr6O11 as the etching agent, and the diamond/copper (boron) composites with the diamond volume fraction of 60.0% and the boron volume fraction of 0.3% were prepared by spark plasma sintering. …”
Get full text
Article -
709
Finite-Element Analysis of Oscillations in Damaged Pipeline Sections Reinforced With a Composite Material
Published 2024-01-01“…This work treats a finite-element analysis of the oscillations in damaged pipeline sections reinforced with a composite wrap performed by ANSYS software when the thickness of the composite wrap was 2.0, 3.0, and 4.0 mm, while the length of the wrap was 400, 600, and 800 mm, respectively. …”
Get full text
Article -
710
Antioxidant Activity and Volatile Composition of Red Araçá Pulp Under Different Drying Conditions
Published 2019-01-01“…Araçá fruit extracts were dried at different air conditions, and an investigation of the impact of drying on the volatile composition and antioxidant activity of araçá extracts was conducted. …”
Get full text
Article -
711
Bioconversion efficiency and chemical composition of Hermetia illucens larvae fed spent mushroom substrates
Published 2024-12-01“…The frass residue and FCR decreased with increased density. Remarkably, when feeding 20% SMS at 250 larvae/box, the harvested biomass, LGR, and FCR did not differ significantly from the 0% SMS control, whereas some of the higher densities led to a deterioration. …”
Get full text
Article -
712
Physico-Mechanical Properties of Alkali-Activated Based Composites Using Recycled Tire Fibers
Published 2025-01-01Get full text
Article -
713
Flexural Behavior of New Demountable Steel–Concrete Composite Beam with Novel Demountable Connectors
Published 2025-02-01“…This study proposes a novel type of demountable steel–concrete composite beam (the slab is connected to the steel beam by T-shaped shear connectors, TCBs) to address the limitations of traditional composite beams, including difficulties in disassembly and challenges in resource recycling. …”
Get full text
Article -
714
Investigation on the broadband active filtering characteristics of plasma composited frequency selective surface structure
Published 2025-08-01“…Abstract To address the demand for wideband, dynamically controllable filtering characteristics in radomes, a plasma composited frequency selective surface (PC-FSS) structure with broadband, active filtering properties is proposed and experimentally demonstrated. …”
Get full text
Article -
715
Design and analysis of energy storage multifunctional composite structures with embedded lithium-ion batteries
Published 2025-07-01“…Embedded batteries can provide energy density of up to about 75 Wh/kg and 20 Wh/kg when 20 × 20 batteries were embedded in CFRP laminates and CFRP roof, respectively. …”
Get full text
Article -
716
Disturbance analysis of shield tunneling in clay and limestone composite strata using EDEM simulation
Published 2025-04-01“…Compared with single formation, studying the disturbance rule of shield tunneling in composite formation is more difficult. This paper takes the shield section of Jinan Metro Line R3 from Olympic Center West Station to Dingjiadong Station as an example, adopts EDEM simulation to simulate the shield tunneling process of clay-limestone composite formation, and studies the transverse and longitudinal settlement of composite formation under different stratification coefficients. …”
Get full text
Article -
717
Effect of Corrosion on Fatigue Failure of Composite Girders with Corrugated Web on Steel Bottom Plate
Published 2024-10-01“…The ultimate failure mode of a pitting fatigue crack was when the crack length reached the thickness of the plate and the component was torn and destroyed; (5) following corrosion, the fatigue life of the test girder was found to be reduced by 10.65%, which suggests that salt corrosion had a significant impact on the fatigue life of the composite girder. …”
Get full text
Article -
718
Study on triaxial mechanical behavior and energy evolution of composite rock with coplanar double fractures
Published 2024-12-01“…The results indicate that: ① The increase of fracture inclination angle and confining pressure has an optimization effect on the mechanical properties of the rock sample, and the increase of fracture length has a deterioration effect on it. In addition, when the composite rock changes from unidirectional stress to three-directional stress, the mechanical properties change sharply and are significantly optimized. ② With the increase of fracture inclination, length and confining pressure, the energy of composite rock presents a U-shaped distribution, decreasing and increasing law respectively, and the energy loss mainly occurs after the damage stress. ③ During the deformation and loading process of rock samples, the microcracks generated are mainly tensile cracks, while shear cracks mainly occur after damage stress. …”
Get full text
Article -
719
Antibacterial Activity of Hydrophobic Composite Materials Containing a Visible-Light-Sensitive Photocatalyst
Published 2011-01-01“…The surface free energy obtained for this composite was 5.8 mN/m. Even when exposed to a weak fluorescent light intensity (100 lx) for 24 hours, the viable cells of gram-negative E. coli on the 12% N-doped TiO2-PTFE film were reduced 5 logs. …”
Get full text
Article -
720
Effects of Harvest Times on the Fatty Acids Composition of Rose Hip (Rosa sp.) Seeds
Published 2017-04-01Get full text
Article