Investigation of Mix Proportion Optimization and Anti-Scouring Performance of Pervious Concrete Base by Xiaoxuan Du, Xinghai Peng, Hongfu Liu

“…The 7-day unconfined compressive strength, permeability coefficient, and elastic modulus were selected as evaluation indices. Response Surface Analysis (RSA) and Analysis of Variance (ANOVA) were applied to determine the optimal mix proportion. …”
Get full text

Shear Failure of Bolted Joints considering Mesoscopic Deformation Characteristics of Rock by Yanhui Cheng, Dongliang He, Jianyu Yang

“…The shear stiffness increases with the increase in the parallel bond modulus, and the shear strength decreases with the increase in the parallel bond modulus. …”
Get full text

Comparative Evaluation of Mechanical Properties of Clear Aligner Biosheet Materials -An In Vitro Study by Pallavi Kusum, Shantanu Sharma, Sovendu Jha

“…Results: Zendura exhibited higher tensile strength (average: 62 ± 3 MPa) and elastic modulus (average: 2400 ± 100 MPa) compared to Duran (tensile strength: 55 ± 2 MPa; elastic modulus: 2100 ± 90 MPa). …”
Get full text

Fracture characteristics of reservoirs with different lithologies in marine-continental transitional facies and its influence on fracturing by ZHANG Wen, LIU Xiangjun, LIANG Lixi, XIONG Jian, WU Jianjun, LI Bing

“…Among them， weak structural surfaces such as plant debris and grain layers have a strong deterioration effect by changing the fracture paths and thus affecting the fracture toughness of the corresponding lithologies. The static elastic modulus of reservoir rocks is an important mechanical factor controlling the fracture toughness of different lithologies， and the fracture toughness has a linear correlation with the static elastic modulus. …”
Get full text

Root Tensile Characteristics of Herbaceous Plants from Source Areas of Lanniqing Landslide in Zhaotong City, Yunnan Province by Xu Zongheng, Chen Yunying, Zhang Yu, Zha Linglong, Tao Zhenpeng

“…[Objective] The tensile strength characteristics of plant roots were studied to understand the performance of roots in complexes, in order to provide a basis for the selection of plants to be used in ecological slope protection. …”
Get full text

Effect of 3D printing settings on the mechanical properties and biocompatibility of polymeric materials used for 3D direct printing of orthodontic aligners by Marco Migliorati, Sara Drago, Martina Lenzuni, Alessandra Marrella, Paolo Giannoni, Alberto Lagazzo

“…Mechanical properties were evaluated through tensile and bending tests, and the results demonstrate that printer selection significantly affects mechanical properties such as ductility and rigidity. …”
Get full text

Experimental study and correction of dynamic characteristic parameters of silty clay under negative temperature conditions by Haotian Guo, Yuli Lin, Jinming Li, Chao Sun

“…In order to examine the principles governing the variation of dynamic characteristic parameters, including the damping ratio, dynamic modulus, and frozen soil backbone curve, under different negative temperature conditions, silty clays sourced from the Changchun region were selected for the research. …”
Get full text

A combined XFEM and RSM approach for predicting crack propagation in nearby buildings during foundation pit construction by Zhaofeng Wu, Tiancheng Wang, Yan Kuang, Zhiliang Zhu, Fenglong Xiao, Pengliang Yang

“…Nine factors, including the distance between the foundation pit and the building, soil elastic modulus, and density, were selected as independent variables, with the crack propagation area as the dependent variable. …”
Get full text

A multifaceted purpose-oriented approach to evaluate material circularity index for rejuvenated recycled asphalt mixtures by Masood Gholami, Ali Khodaii, Pouria Hajikarimi

“…Ultimately, this study demonstrates that the MCI can serve as a multi-conceptual index for selecting appropriate asphalt mixtures. This process ensures a sustainable, performance-based asphalt mixture selection by integrating regional conditions, performance needs, and environmental factors.…”
Get full text

Calculation method of impingement depth and multiple objective optimizations of nozzle layout for aviation gears considering windage by Linlin Li, Yuanjun Ye, Yuzhong Zhang, Kai Zhao

“…The results show that: the modulus and transmission ratio mainly affect the value range of oil jet streamline offset, and the correlation is positive. …”
Get full text

SEDIMENT RUNOFF AND WATER TURBIDITY OF THE MAIN TRIBUTARIES OF THE LAKE LADOGA by Marina V. Shmakova, Sergey A. Kondratyev

“…In this regard, for each tributary were selected rivers-analogues the main criteria in the selection was the slope, the grain size of sediments and the catchment area (water availability). …”

Effect of Fibers on the Mechanical Properties and Mechanism of Cast-In-Situ Foamed Concrete by Wenhui Zhao, Zexing Liu, Ruiqi Wang

“…Secondly, alkali-resistant glass fiber (high elastic modulus) and polypropylene fiber (low elastic modulus) were selected to determine the optimal fiber length and content. …”
Get full text

Studies on characterization of composite materials components for part production in agricultural industry by Imad Rizakalla Antypas, Alexey G. Dyachenko

“…As a result, the testing on the material static tension has given the experimental value of the elasticity modulus of Ecm = 4836 MPa, and the tensile modulus - Еc = 1530 MPa. …”
Get full text

A Neural Network-Based Structural Parameter Assessment Method for Prefabricated Concrete Pavement by Yongsheng Tang, Yunzhen Lin, Tao Yu

“…Considering the structural characteristics, three key parameters are selected as the key parameters to implement the assessment, namely, the bending and tensile modulus, reaction modulus at top of the subgrade, and seam equivalent modulus. …”
Get full text

Effects of Structural Configurations on the Bending Performance and Dimensional Stability of Laminated Bamboo Made from Two Gigantochloa Species by Norwahyuni Mohd Yusof, Mohd Zuhri Mohamed Yusoff, Pairdah Md Tahir, Redzuan Mohammad Suffian James, Mohd Khairun Anwar Uyup, Petar Antov, Juliana Abdul Halip, Izwan Johari, Seng Hua Lee

“…Flatwise loading improved the modulus of elasticity (MOE) by 5% but reduced the modulus of rupture (MOR) by 10% compared to    edgewise loading. …”
Get full text

Performance of machine learning algorithms to evaluate the physico-mechanical properties of nanoparticle panels by Derrick Mirindi, James Hunter, David Sinkhonde, Tajebe Bezabih, Frederic Mirindi

“…This review analyzes secondary data on nanoparticle integration in board production, aiming to evaluate the relationships among physical (water absorption (WA) and thickness swelling (TS)) and mechanical (modulus of rupture (MOR), modulus of elasticity (MOE); and internal bond (IB) strength) properties and to predict performance using machine learning (ML) algorithms. …”
Get full text

Nanoindentation characterization of shale micromechanics and fracturing ability evaluation of reservoir by Lichao CHEN, Diankun ZHANG, Yuhang XIAO, Shengwei WANG, Shuaifeng LYU

“…In this paper, a quantitative classification evaluation method for shale engineering mechanical quality is proposed based on seven indexes, including rock elastic modulus, hardness, fracture property, brittleness index, clay mineral content and mineral contact mode, in order to provide a quantitative scientific basis for shale reservoir fracturing quality evaluation and optimal selection of fracturing engineering desserts.…”
Get full text

Research on Rock Fracture Surface Morphology Characterization under Brazilian Test by Zhigang Feng, Xuezai Pan, Guoxing Dai, Hongguang Liu

“…The result illustrates that both modulus maximum and fractal variation method can detect anisotropy of rock fracture failure. …”
Get full text

3D-printed motorcycle seats: Replicating polymer foam performance for rapid prototyping and rider comfort by Andrea Montalti, Patrich Ferretti, Fiammetta Spano, Alfredo Liverani

“…An experimental map, derived from three parameters (material hardness, elastic modulus, and foam density) illustrates the behaviour of the specimens, with iso-lines representing constant density. …”
Get full text

Comparison of Compression Parallel to Grain of Acacia Hybrid for Untreated and Treated at Different Combination of Age Groups by Gaddafi ISMAILI, Mohamad Yakub BIBI SURIANI, Iskanda OPENG, Nur Syahina YAHYA, Ismaili ZURINA

“…Acacia hybrids have been selected for reforestation projects due to their rapid growth. …”
Get full text