Structural Evolution and Ionic Conductivity of Al2O3-Doped LLZO via Single Heat Treatment by Endah Yuniarti, Slamet Priyono, Simon Sindhu Hendradjaja, Jan Setiawan, Kusdi Prijono, Brity Femlee R

“… This study investigates the synthesis via solid state reaction and characterization of Li₇La₃Zr₂O₁₂ (LLZO) as a solid electrolyte doped with Al₂O₃ using a one-step heat treatment (sintering at 900°C for 4 hours). …”
Get full text

Influence of Heat Treatments on the Photocatalytic Activity of TiO2 Surfaces Produced by Direct Laser Interference Patterning by Tobias Fox, Fabian Kay Bonner, Christoph Pauly, Guido Kickelbick, Frank Mücklich

“…In this contribution, various heat treatments are performed both during and after the laser processing to create surfaces with even higher photocatalytic activities and to better understand the formation of various process oxides and their effect on the resulting activity. …”
Get full text

Investigating Internal Heat Exchanger Performance in a VCR System with a CO2 and LPG Refrigerant Mixture by Taiwo Elizabeth Oshodin, Kazeem Aderemi Bello, Bukola Olalekan Bolaji, Bayode Julius Olorunfemi, Osagie Jolly Aighovbiosa, Friday Onuh

“…The REFPROP software design was used to conduct experiments and determine the important process parameters. A confirmation test was performed to validate the expected results of the REFPROP software technique. …”
Get full text

Structural, Magnetic, and Mössbauer Study on Nb and Heat Treatment of Fe-Si-B-P-Cu-Nb Ribbons by Hyunkyung Lee, Hyunkyung Choi, Young Rang Uhm, Haein Choi-Yim

“…By varying the Nb content within Fe_85-<i>x</i>Si₂B₈P₄Cu₁Nb<i>_x</i> (<i>x</i> = 0.0, 0.5, 1.0, and 1.5), we explored finer adjustments to achieve homogeneous amorphousness during the melt spinning process. Careful control over the Nb content facilitated the production of amorphous ribbons with consistent homogeneity, which was critical for the subsequent fabrication of nanocrystalline structures through heat treatment. …”
Get full text

Influence of heat cycling conditions in the additive manufacturing of stainless steel and al-si alloy raw parts on their microstructure by I. L. Pobol, A. A. Bakinovski, M. K. Stepankova, A. N. Burin, A. D. Gubko

Get full text

Evaluation of mathematical models and artificial neural networks for prediction of sorption isotherm in microwave pre-heated mung bean by Kulwinder Kaur, Satish Kumar, Preetinder Kaur, Rupinder Pal Singh, Inderjit Singh Grewal

Get full text

Impact of ultrasonic and heat treatments on the physicochemical properties and rennet-induced coagulation characteristics of milk from various species by Wenjuan Hou, Xuli Ma, Zhongna Yu, Latiful Bari, Hongning Jiang, Qijing Du, Rongbo Fan, Jun Wang, Yongxin Yang, Rongwei Han

“…Milk samples were subjected to heat treatments at different temperatures (65 °C, 80 °C, 90 °C, 100 °C) and ultrasonic treatment at varying power levels (200 W, 400 W, 600 W, 800 W, 1000 W). …”
Get full text

Heat and abrasion resistance of fly ash geopolymer mortar comprising ceramic polishing waste and cured with different conditions by Jay Bhavsar, Vijay Panchal

“…The vitrified and wall tile polishing processes produce two types of ceramic polishing wastes (CPWs): vitrified tile CPW (VCPW) and wall tile CPW (WCPW). …”
Get full text

Evaluation of heat-induced changes and 5-hydroxymethylfurfural formation in mare milk - a comparative study to cow milk by Irena Barukčić Jurina, Ivana Blažević, Tamara Jurina, Andreja Leboš Pavunc, Rajka Božanić, Katarina Lisak Jakopović

“…The aim of this study was to examine the effects of different heat treatments on mare milk quality and compare those to heat induced changes in cow milk. …”
Get full text

Heat and abrasion resistance of fly ash geopolymer mortar comprising ceramic polishing waste and cured with different conditions by Jay Bhavsar, Vijay Panchal

“…The vitrified and wall tile polishing processes produce two types of ceramic polishing wastes (CPWs): vitrified tile CPW (VCPW) and wall tile CPW (WCPW). …”
Get full text

Experimental investigation of heterotrophic Micro-Algae Oil biodiesel production processes by Folayan Adewale Johnson, Bilal Patel, Bolanle Deborah Ikotun

“…While fatty acids methyl esters characterization was done by a Bruker FTIR Spectrometer with ATR sampling accessories. Similarly, the fuel's ignition and combustion qualities and oxidation stability were measured through cetane rating, heating value and induction periods experiments respectively.An oil yield of 68.7 % was obtained. …”
Get full text

Continuous Fabrication Process of Aluminum Foam from Foaming to Press Forming by Yoshihiko Hangai, Yuito Kaneko, Kenji Amagai

“…It was shown that it is possible to continuously and sequentially foam the precursors by heating and press forming the foamed samples. In addition, aluminum foam with a similar shape, porosity, and pore structure can be fabricated using the continuous process. …”
Get full text

Acceleration of breeding process of winter wheat while using the regulated conditions by B. I. Sandukhadze, M. I. Rybakova, G. V. Kochetygov, V. V. Bugrova, A. A. Morozov, E. K. Sandukhadze, R. Z. Mamedov

Get full text

Enhancing Microwave Disinfection: Impact of Sodium Chloride on Microbial Inactivation by Saleh A. Alfawaz, Ibrahim N. Alquaydheb, Amirreza Ghadimi Avval, Sara Ghayouraneh, Samir M. El-Ghazaly, Jianhong Zhou, Yuchun Du

“…These insights emphasize the critical importance of optimizing exposure time and incorporating NaCl in microwave-based disinfection processes to achieve more effective microbial inactivation.…”
Get full text

EFFECT OF LEARNING MODEL APPLICATION OF GUIDED LABORATORY INQUIRY TO LOGICAL THINKING ABILITY OF STUDENTS ON HEAT TO ELECTRICITY CONVERSION MATERIAL by Fitri Fauziah, Eko Suyanto, Ismu Wahyudi, Kartini Herlina

“…The technique used is purposive sampling, so that the sample in class XII MIA 1 is obtained in the form of a one group pretest-posttest design. …”
Get full text

Technology for processing phosphogypsum into a fluorescent dye based on calcium sulfide by O. A. Medennikov, N. P. Shabelskaya

“…According to X-ray phase analysis, phosphogypsum is mainly comprised of calcium sulfate dihydrate and calcium sulfate hemihydrate. Heat treatment of a phosphogypsum sample at a temperature of 1073 K is accompanied by the formation of anhydrous calcium sulfate. …”
Get full text

Influence of different processing methods on anti-trypsin activity in bovine colostrum by Lukas Trzebiatowski, Plamen Georgiev, Kathrin Büttner, Axel Wehrend

“…In these first analyzed 40 and 59 extra samples (in total 99 samples), the anti-trypsin activity of frozen colostrum (0.85 mg/mL, SEM 0.01) was compared with colostrum subjected to acidification (0.84 mg/mL, SEM 0.01), heat treatment at 60°C for 60 min (0.65 mg/mL, SEM 0.02), and heat treatment at 63.5°C for 30 min (0.61 mg/mL, SEM 0.02). …”
Get full text

Sustainable technology for coconut processing: Biomass-powered dryer and performance evaluation by C. Naveen Prabhu, S. Dhanushkodi, K. Sudhakar

“…Its simple construction and efficient operation make it ideal for small-scale copra processing in rural and urban settings, contributing significantly to sustainability in agricultural operations.…”
Get full text

Synergy of laser powder bed fusion (LPBF) and heat treatment for CuNi2SiCr alloy enhancement by Eskandar Fereiduni, Ali Ghasemi, Noah Sargent, Mohamed Balbaa, Liyi Wang, Mohamed Elbestawi, Swee Leong Sing, Wei Xiong

“…This research explores the thermal and mechanical properties of a CuNi2SiCr alloy made by laser powder bed fusion (LPBF) for potential use in the neck insert of extrusion blow molds. Process parameter optimization, aging heat treatment design, thermal and mechanical property characterizations, microstructural analysis, and an exploration of the factors affecting thermal conductivity are presented. …”
Get full text

Development and Study of Antibacterial <i>In situ</i> Coatings for Processing Implants by E. O. Bakhrushina, A. A. Popova, M. V. Pomytkina, M. N. Anurova, N. B. Demina, I. I. Krasnyuk

“…The use of hydrogel coatings for the prevention of periprosthetic infections is an effective measure, while the process of coating the implant can be simplified due to the use of in situ systems.Aim. …”
Get full text