An Applicable Control-Relevant Method for Nonlinearity Assessment using Gap Metric by Mahdi Ahmadi

“…Unlike most of the current nonlinearity measurement, the proposed method could be used for both integrating and unstable nonlinear systems. …”
Get full text

Motion Control and Obstacle Avoidance of Mobile Robot with Mecanum Wheels by Hassan M. Alwan, Volkov Andrey Nikolavich, Ali Shbani, Kochneva Olga Vladmirovna

“…Most current research on motion control and obstacle avoidance for mobile robot (MR) is primarily focused on static obstacle avoidance, with limited attention to detecting as well as avoiding moving obstacle. …”
Get full text

Contamination of food with residues of antibiotics in the sulphonamide class, risk can be avoided by Carmen Lidia Chitescu, Anca Nicolau

Get full text

Improvement of methods for estimation of catchability for trawl survey systems with use of hydroacoustic means (on example of walleye pollock in the Okhotsk Sea) by Mikhail Yu. Kuznetsov, Vladimir I. Poljanichko, Igor A. Ubarchuk

“…The experimental method of its estimation (comparing of fish density in towed volume determined by other tools with trawl catch) is considered as the most authentic. …”
Get full text

FInCH: Fast statistical inference for continuous‐time animal movement by Dominic Grainger, Paul G. Blackwell

Get full text

Empirically Informed, Idiographic Networks of Concordant and Discordant Motives: An Experience Sampling Study With Network Analysis in Non-Clinical Participants by Thies Lüdtke, Fabian Steiner, Thomas Berger, Stefan Westermann

Get full text

The Effects of Money Beliefs on Investment Addiction by Ali Bahrami, Amirhossein Taebi Noghondari, Hadis Zeinali

“…The data were analyzed using structural equations in AMOS software using the maximum likelihood estimation (MLE) method. The findings suggest that money worship and money status beliefs significantly affect investment addiction, whereas money avoidance belief does not affect investment addiction. …”
Get full text

Synthesis of evasive maneuver control of unmanned aerial vehicle for terminal restrictions by N. Y. Polovinchuk, S. V. Ivanov, L. I. Kotelnitskaya

Get full text

Maximization of Fundamental Frequency of Composite Stiffened Hypar Shell with Cutout by Taguchi Method by Puja Basu Chaudhuri, Anirban Mitra, Sarmila Sahoo

Get full text

Phase Current Equalization Method of IPMSM-Based on-Board Boost Converter for Electric Vehicles by Yunkyung Hwang, Jaehong Kim, Minhyeok Lee, Juwon Choi, Kwanghee Nam

“…This study also addresses phase current equalization to avoid torque generation. To this end, a compensation method is proposed to obtain an accurate average current in the double-sampling method, which samples the top and valley. …”
Get full text

Formation Pore Pressure Prediction and Application Based on Aacoustic Logging by QI Wenli, WU Huimei, LOU Yishan, ZHAI Xiaopeng, LIU Hong

“…The results show that the maximum error of the prediction results of the equivalent depth method and the effective stress method exceeds 10%, which cannot satisfy the engineering damands, while the prediction error of the Eaton method is the smallest, with a maximum error of 4.77%. …”
Get full text

Kernel Local Linear Discriminate Method for Dimensionality Reduction and Its Application in Machinery Fault Diagnosis by Kunju Shi, Shulin Liu, Hongli Zhang, Bo Wang

“…Experiments have been performed to evaluate the new method. The results show that KLLD has more benefits than traditional methods.…”
Get full text

Development of a liquid chromatographic method with a different selectivity for the quantification of eighteen phytocannabinoids in hemp by Liguo Song, Jake Provis, Ammar Mohammad Al-Bataineh, Keszia Jervelle Fabien, Madeline Kotler

“…Currently, most LC-DAD methods use the water/acetonitrile eluting system, while this study aimed to use the water/methanol eluting system. …”
Get full text

From rectangle to parallelogram: an area-weighted method to make time-space diagrams incorporate traffic waves by Ning Wang, Xingye Wang, Hai Yan, Zhengbing He

Get full text

Thermo‐Electro‐Mechanical Modeling of Failure: Application to Long‐Term Reliability of Aging Transmission Lines by Eduardo A. Barros De Moraes, K. C. Prakash, Mohsen Zayernouri

“…We define a limit state function based on maximum operating temperature to avoid excessive overheating and sagging. …”
Get full text

Adapting High-Resolution Respirometry to Glucose-Limited Steady State Mycelium of the Filamentous Fungus Penicillium ochrochloron: Method Development and Standardisation. by Christoph W Schinagl, Pamela Vrabl, Wolfgang Burgstaller

Get full text

Research on dissimilation characteristics and control method of failure of surrounding rock in the roadway with repeated mining of steep and ultra-close multiple coal seam by Housheng JIA, Zhiming ZHANG, Shaowei LIU, Bo PENG, Hui YU, Shuaiqin SHAO, Yibo WANG

“…In the design of roadway section, the longest side of roadway should be located on the side of hard rock stratum and try to avoid the direction of maximum failure depth, so as to make full use of the annihilation characteristics of plastic zone of hard rock stratum and avoid the excessive expansion of butterfly leaves in plastic zone of roadway surrounding rock. …”
Get full text

Inderwater noise characteristics of TINRO-Center’s reseach vessels by Michail Yu. Kuznetsov, Vasiliy I. Shevtsov, Vladimir I. Poljanichko

Get full text

Application of Ultrashort Implants in Posterior Maxilla With Insufficient Bone Height: A Finite Element Analysis by Lang Zheng, Lailong Luo, Lulu Chang, Mingfa Ren, Fangyuan Li, Yang Liu

“…Von Mises stresses within the implants and the sinus floor cortical bone, maximum and minimum principal stresses within the alveolar ridge cortical bone, and the maximum principal strain of the cancellous bone were determined using these models. …”
Get full text

Orthodontic Bonding: Review of the Literature by Ali H. Alzainal, Ahmed Shehab Majud, Abdulfatah M. Al-Ani, Adil O. Mageet

“…Even though orthophosphoric acid is the most widely used enamel conditioning agent, laser etching should be considered to avoid enamel decalcification. …”
Get full text