Analysis of the Processes in the Welding Arc during Additive Manufacturing by V. Petkov, P. Tashev, V. Dyakova

“…Experimental studies of arc burning have been carried out with a view to use it for wire arc additive manufacturing processes. …”
Get full text

Arc Interference Behavior during Twin Wire Gas Metal Arc Welding Process by Dingjian Ye, Xueming Hua, Yixiong Wu

“…In order to study arc interference behavior during twin wire gas metal arc welding process, the synchronous acquisition system has been established to acquire instantaneous information of arc profile including dynamic arc length variation as well as relative voltage and current signals. …”
Get full text

Estimation of Welding Current with Adaptive Neuro Fuzzy Inference System (ANFIS): Utilization of Arc Light Signal Emitted in the Arc Welding Process by Yalçın Kanat, Yaşar Birbir, Gazi Büyüktaş

“…The main purpose of this study is to estimate the welding current using the arc light signal emitted during the welding process. …”
Get full text

Experimental Evaluation of Arc Stud Welding Techniques on Structural and Stainless Steel: Effects on Penetration Depth and Weld Quality by Tanja Tomić, Tihomir Mihalic, Josip Groš, Lucija Vugrinec

“…This study experimentally compares three arc stud welding techniques—arc welding with a ceramic ferrule (ARC CF), arc welding with shielding gas (ARC SG), and arc welding assisted by a radially symmetric magnetic field (ARC SRM)—applied to structural steel (1.0038) and stainless steel (1.4301). …”
Get full text

Effect of Arc Welding and Friction Stir Welding Processes on Sidewall Welding Deformation of Aluminum Alloy Carbody in High-speed Railway EMU by LIU Song, WANG Ya’nan, GENG Ming, ZHANG Xinmeng, GUO Chuncheng, YAN Gege

“…It is necessary to study the currently mature arc welding process and the next-generation friction stir welding process, so as to compare and analyze the welding deformations caused by these two methods. …”
Get full text

Weld Pool Boundary Detection Based on the U-Net Algorithm and Weld Seam Tracking in Plasma Arc Welding by Jidong Lu, Satoshi Yamane, Weixi Wang, Ning Li, Siqi Wang, Yuxiong Xia

“…Plasma arc welding can achieve high-quality welding joints in high-strength manufacturing fields, such as aviation and automotive, and improve production efficiency. …”
Get full text

Investigation of wire arc additive manufacturing of cylindrical components by using cold metal transfer arc welding process by K. Shunmugesh, Snobin Mathew, Arun Raphel, Raman Kumar, T. Ramachandran, Ashish Goyal, Abhijit Bhowmik

Get full text

MECHANISM ANALYSIS AND EXPERIMENTAL STUDY OF VACUUM ARC WELDING EQUIPMENT by MAO Jun, XIE ChunXue, XIE Miao, LIU ZhiXiang

Get full text

Study on pulsed-arc welding issues at the Machines and Welding Production Automation Department, RIAE — DSTU by V. A. Lenivkin, D. V. Rogozin

“…The results of studying the possibility to control the welding arc processing behavior and the proposed methods for calculating the parameters of the PAW mode became the basis for the development of technology and equipment for the mechanized GMAWP of aluminum alloy assemblies. …”
Get full text

Effect of welding current on the mechanical properties of Al 5083 alloy processed using high-current gas metal arc welding by Cheolho Park, Hyunbin Nam, Namhyun Kang

Get full text

Modeling and experimental comparison of residual stresses and microstructure in UNS S32507 welds using Gas Tungsten Arc and Laser Beam Welding processes by G. Surya Prakash Rao, Panchagnula Jayaprakash Sharma, Suresh Akella, Harinadh Vemanaboina, Jasvinder Singh, MVV Prasad Kantipudi, Chander Prakash, Khang Wen Goh, Dao Thanh Phong

Get full text

Selection of the Process of Arc Welding of Sealing Surfaces of Power Valves with a Consumable Electrode in the Shielding Gas by D. V. Rogozin, V. A. Lenivkin

“…The study and the resulting data make a certain contribution to solving the problem of the influence of arc welding processes on the parameters of weld beads and on the hardness of the metal of sealing surfaces. …”
Get full text

Process characteristics of thick flux band-constrained arc ultra-narrow gap welding method by Zhenmin LIU, Liang ZHU, Aihua ZHANG, Hui ZHOU, Rui LIN, Peijie MA

“…The stability of the flux band in confining the arc was successfully improved. The process characteristics of the arc ultra-narrow gap welding method constrained by thick flux bands were studied through experiments. …”
Get full text

Optimizing Al7072 Grooved Joints After Gas Tungsten Arc Welding by Wei Guo, Qinwei Yu, Pengshen Zhang, Shunjie Yao, Hui Wang, Hongliang Li

Get full text

Computational welding simulation of a plasma wire arc additive manufacturing process for high-strength steel by Simon Schönegger, Matthias Moschinger, Norbert Enzinger

“…Compared to other arc processes, plasma welding constricts the arc, which leads to a highly concentrated energy input. …”
Get full text

Numerical analysis arc behavior in single-power double-wire single-arc gas metal arc welding by Xiaoli Wang, Yangsen Liu, Qi Zhang, Chengfu Luo, Qingxian Hu

“…This study provides quantitative insights into arc behavior modulation through dual-wire configurations, offering a foundation for optimizing welding processes in industrial applications.…”
Get full text

Comparative analysis of structural and mechanical properties of duplex stainless steel (DSS) weldments prepared by flux core arc welding and shielded metal arch welding processes by E. Ajenifuja, A.P.I. Popoola, O. Popoola

“…However, this material has its limitations as it's susceptible to cracking particularly stress corrosion cracking or pitting corrosion and can exhibit poor metallurgical properties such as microstructures and phase containing unbalanced proportions of ferrite and austenite. In this study, Flux Core Arc Welding (FCAW) is compared with Shielded Metal Arch Welding (SMAW) process, in terms of their effects on the structural and mechanical properties and performances of DSS weldments. …”
Get full text

Arc Welding-Laser Shock Forging Process for Improving the Mechanical Properties of the Fe-Cr-C Cladded Layer by Yunpeng Fan, Chong Zhang, Hongtao He, Fengwei Zhang, Yongkang Zhang

“…While parts can be repaired via arc welding (AW), it is usually necessary to add some types of excitation method to improve the mechanical properties of the cladded layer. …”
Get full text

Enhancing Precision in Arc Welding Simulations: A Comprehensive Study of the Ellipsoidal Heat Source Model by Senol Sert, Ergun Nart

“…Arc welding is a complex multiphysics mitigation process, and the related finite element simulation requires significant computational resources for multiphysics modeling to determine the temperature distributions in engineering problems accurately. …”
Get full text

Tailoring flux composition to control welding fume and hexavalent chromium emissions in flux cored arc welding by Sungyo Jung, Gi Taek Oh, Seungjin Jung, Chungsik Yoon

Get full text