-
21
Buckthorn Leaves as an Efficient Material for Simultaneously Multi Eco-Friendly Purposes
Published 2025-07-01Get full text
Article -
22
MECHANICS OF CONTACT INTERACTION BETWEEN PROPELLER SHAFT AND STERN BEARING UNDER THE TRANSVERSE VIBRATIONS
Published 2017-10-01“…The calculations are reduced to solving the contact problem of a beam on an elastic base, which simulates a propeller shaft and a deadwood stern bearing in the design scheme.Results. …”
Get full text
Article -
23
Vanadium remediation from polluted wastewater using a novel non-conventional adsorbent
Published 2025-09-01“…Experiments were conducted using batches under various operating conditions. The obtained results indicated that the vanadium recovery efficiency reached 81 % and was in direct proportion to the pH, agitation speed, and contact time, and inversely with other variables, while adsorption capacity reaching 0.1 mg/g. …”
Get full text
Article -
24
Kinetic, Isotherm and Thermodynamic Studies on the Removal of Zn (II) From Aqueous Solution using Silica Adsorbent
Published 2024-11-01“…Factors such as initial concentration, contact time, adsorbent dose, pH, agitation speed, and temperature were examined in a batch process. …”
Get full text
Article -
25
-
26
Landscape as a Shared Space for Badgers and Cattle: Insights Into Indirect Contact and Bovine Tuberculosis Transmission Risk
Published 2025-04-01“…Delaying grazing of fodder fields after (silage) harvest until sward length has increased, restricting grazing to improved pastures, keeping calves with cows longer, or ensuring all batches of cattle have at least some calves present and not grazing fields with badger setts (or fencing around setts to prevent cattle access) may provide simple, cost‐effective strategies to reduce indirect badger–cattle contact, thus potentially lowering bTB transmission risk.…”
Get full text
Article -
27
Comparison of batch and continuous operation modes for maxilon red azo dye removal using Chlorella vulgaris microalgae within photobioreactor (PBR) and a dynamic membrane photobior...
Published 2025-08-01“…DMPBR, operated in continuous mode, achieved greater and constant removal efficiency of approximately 98% at 15 mg L−1 due to prolonged and uninterrupted contact between dye and biomass. The continuous DMPBR configuration overcame batch PBR saturation limitations, with enhanced biosorption activity, process stability, and improved effluent quality. …”
Get full text
Article -
28
Sorção de potássio em amostras de solo submetidas à aplicação de vinhaça Sorption of potassium in soil submitted to application of vinasse
Published 2012-07-01“…Considering the high levels of nutrients, especially potassium and the high content of organic matter, the disposal of vinasse into the soil needs further studies, because there may be leaching of several elements to groundwater. Batch tests were performed, which allowed assessment of the effect of different factors such as variation of the soil to solution ratio and the variation of contact time between soil and solution to evaluate the mobility of potassium in three different soil samples. …”
Get full text
Article -
29
Removal of Methylene Blue from Wastewater Using AL Haji Plant as a Low-Cost, Eco-Friendly Adsorbent
Published 2025-06-01Get full text
Article -
30
Zinc oxide-nanoparticle impregnated poultry droppings activated carbon for model oil desulfurization: Experimental investigation and regression modelling with uncertainty quantific...
Published 2025-01-01“…The produced adsorbents (PDAC and PDAC-ZnO-NPs) were appropriately characterized. Batch adsorption experiment was designed by Definitive Screening Design (DSD) for parameters: adsorption temperature (25 – 50°C), contact time (10 – 60 min), agitation rate (50 – 250 rpm), and adsorbent dosage (50 – 250 mg). …”
Get full text
Article -
31
Removal of Organic Dye Using Graphene-based Composite: Isotherm and Kinetic Studies
Published 2024-11-01“…Furthermore, GO and GO-based Montmorillonite composites are used as effective adsorbents in removing organic MG oxalate dye through batch extraction by varying pH, contact time, and concentration. …”
Get full text
Article -
32
-
33
Research of selection seeds drying in dense layer
Published 2018-03-01“…Researches were conducted in batch-operated laboratory machine. The humidified seeds of sugar beet were blowed-through with the drying agent speed of 0.5 m/s and temperature of 45 degrees Celsius. …”
Get full text
Article -
34
The Development of Novel Edible Films from Single-Cell Protein Produced by the Biotechnological Valorization of Cheese Whey
Published 2024-07-01“…Regarding wettability, SCP-based films could be described as oleophilic surfaces since the degree of oil contact angle (OCA) ranged between 46.7° ± 1.3 and 54.0° ± 0.5. …”
Get full text
Article -
35
Safety assessment of the process Loreco Plast Recyclage, based on the Vacurema Prime technology, used to recycle post‐consumer PET into food contact materials
Published 2023-04-01“…Abstract The EFSA Panel on Food Contact Materials, Enzymes and Processing Aids (CEP) assessed the safety of the recycling process Loreco Plast Recyclage (EU register number RECYC278), which uses the Vacurema Prime technology. …”
Get full text
Article -
36
-
37
Safety assessment of the process Creative Recycling World Company, based on the Vacurema Prime technology, used to recycle post‐consumer PET into food contact materials
Published 2023-03-01“…Abstract The EFSA Panel on Food Contact Materials, Enzymes and Processing Aids (CEP) assessed the safety of the recycling process Creative Recycling World Company (EU register number RECYC279), which uses the Vacurema Prime technology. …”
Get full text
Article -
38
Adsorption of iron by using hybrid Akar Putra and commercialized chicken eggshells as bio-sorbents from aqueous solution
Published 2016-05-01“…Therefore, in current study, commercialized chicken eggshells and hybrid Akar Putra chicken eggshells were conducted in batch experiment to testify the capabilities of bio-sorbent materials in iron (II) ion removal from aqueous solution at optimized level of dosage and equilibrium contact time. …”
Get full text
Article -
39
Biosorption optimization and mechanism of biochar from exhausted coffee husk on iron in aqueous solution using response surface methodology
Published 2024-12-01“…The pH was in a range of 4–9, while the contact time was in between 30 and 150 minutes and the dosage 0.05–2.5 g. …”
Get full text
Article -
40
A multi-visual measurement method for ultimate tensile elongation of steel strand based on spatial characteristics
Published 2025-12-01“…Prestressed steel strands exhibit remarkable strength and relaxation properties, making them essential in engineering projects such as bridges and high-rise buildings. Traditional contact-based measurements using strain gauges typically require adhesive bonding, which may pose mechanical injury risks to operators and surface damage to the strands, and their accuracy is generally limited to ±0.05 mm. …”
Get full text
Article