Microstructural Evolution of UNS S32205 Duplex Stainless Steel During Cold Rolling and Subsequent Annealing by C. Gauss, M.J.R. Sandim, H.R.Z. Sandim

“…Strain-induced martensite was not detected within this strain range by using X-ray diffraction and DC-magnetisation measurements. …”
Get full text

Research on Acoustic Field Correction Vector-Coherent Total Focusing Imaging Method Based on Coarse-Grained Elastic Anisotropic Material Properties by Tianwei Zhao, Ziyu Liu, Donghui Zhang, Junlong Wang, Guowen Peng

“…An ultrasound simulation model was developed based on material backscatter diffraction results, and the scattering attenuation compensation factor was optimized. …”
Get full text

Substrate orientation influence on nanotwinning in magnetron sputtered CoCrFeMnNi and Ni coatings by Anna Jansson, León Zendejas Medina, Erik Lewin, Olivier Donzel-Gargand, Ulf Jansson, Lisa Lautrup

“…The coatings were grown on a polycrystalline 316L stainless-steel substrate with near-random crystal texture, providing a comprehensive selection of samples on a single substrate. Electron backscatter diffraction was used to identify the film orientation, followed by transmission electron microscopy of selected regions.The presence and density of twins depended on both the material and the growth orientation. …”
Get full text

Effect of Austenitizing Temperature on the Retained Austenite and Carbide Fractions in SAE 52100 Steel after Quenching by Maria Vittoria Moraschini Reis, Carolina Amaral, Leandro Reis Lidízio, Sérgio Souto Maior Tavares, Bráulio Soares Archanjo, Oleksii Kuznetsov, Carlos Alberto Achete, Geronimo Perez

“…Microstructural and mechanical characterization techniques, including X-ray diffraction (XRD), ferritoscopy, electron backscatter diffraction (EBSD), transmission electron microscopy (TEM), and hardness test Rockwell were employed. …”
Get full text

Improved Charge Carrier Transport Across Grain Boundaries in N‐type PbSe by Dopant Segregation by Huaide Zhang, Minghao Shen, Christian Stenz, Christian Teichrib, Riga Wu, Lisa Schäfer, Nan Lin, Yiming Zhou, Chongjian Zhou, Oana Cojocaru‐Mirédin, Matthias Wuttig, Yuan Yu

Get full text

Kinetic‐Controlled Crystallization of α‐FAPbI3 Inducing Preferred Crystallographic Orientation Enhances Photovoltaic Performance by Sooeun Shin, Seongrok Seo, Seonghwa Jeong, Anir S. Sharbirin, Jeongyong Kim, Hyungju Ahn, Nam‐Gyu Park, Hyunjung Shin

“…With microscopic observations, for example, electron backscatter diffraction and selected area electron diffraction, it is examined that higher concentration of MACl induces slower crystallization kinetics, resulting in larger grain size and [100] preferred orientation. …”
Get full text

Effect of high-strain cold rolling on microstructure, texture, and mechanical properties of pure zinc for biomedical applications by Jin Cui, Hengyang Yu, Yong Gong, Poorva Sharma, Ashwini Kumar, Lianjun Sun

“…This study investigates the microstructural and textural evolution of pure Zn induced by high-strain cold rolling (up to 98% reduction) and its consequent effect on microhardness, employing x-ray diffraction (XRD), electron backscattered diffraction (EBSD), and Vickers hardness testing. …”
Get full text

Detailed characterization of complex banding in air-cooled bainitic steels by Morales-Rivas L., Roelofs H., Hasler S., Garcia-Mateo C., Caballero F.G.

“…Microstructural and crystallographic studies by means of Scanning Electron Microscopy and Electron Backscatter Diffraction did not reveal any substantial differences between bands and matrix. …”
Get full text

The Role of Pores in the Cavitation Erosion of Additively Manufactured Metal: An In Situ Study by Yuan Song, Zhenhua Wang, Bingyang Ma

“…The morphological evolution of various pores during CE was investigated via electron backscatter diffraction and scanning electron microscopy. …”
Get full text

Effect of service temperature on cyclic mechanical behavior of magnesium with fine grained structure by Qihui Li, Qizhen Li

“…The loading condition is almost the same for all selected temperatures. The tested samples were prepared for microstructural characterization and observed using the electron backscatter diffraction technique. …”
Get full text

RETRACTED ARTICLE: A naturally occurring Al-Cu-Fe-Si quasicrystal in a micrometeorite from southern Italy by Giovanna Agrosì, Paola Manzari, Daniela Mele, Gioacchino Tempesta, Floriana Rizzo, Tiziano Catelani, Luca Bindi

“…The chemistry of the icosahedral phase was characterized by electron microprobe, and the rotational symmetry was confirmed by means of electron backscatter diffraction. The FB-A1 micrometeorite represents the third independent discovery of naturally occurring intermetallic Al-Cu-Fe-(Si) alloys in extraterrestrial bodies and the second case of extraterrestrial material containing a natural quasicrystal, after Khatyrka meteorite.…”
Get full text

Effects of varying weld speeds on the microstructure, mechanical properties, and corrosion behavior of clad rebars in a marine environment by Zecheng Zhuang, Weiping Lu, Zhe Gou, Lei Zeng, Xuehai Qian, Rifeng Wang, Erte Lin, Zhen Li, Yong Xiang, Jianping Tan

“…The microstructural changes, such as grain size, geometric necessary dislocation density, dynamic recrystallization, and grain orientation, were measured using the backscatter diffraction (EBSD) technique. The mechanical characteristics of welded specimens at four welding speeds were measured using the Vickers hardness test. …”
Get full text

Amphistegina lessonii and Amphistegina lobifera shell microstructure, texture and twinning pattern reflect resilience to cadmium and lead by A. Sancho Vaquer, E. Griesshaber, X. Yin, M. Siccha, N. Ben-Eliahu, B. Herut, E. Rahav, S. Abramovich, M. Kucera, W. W. Schmahl

“…Crystal organization was measured with Electron-Backscattered-Diffraction (EBSD), shell structure was imaged with FE-SEM. …”
Get full text

Gas Sensors Based on Nanostructures of Binary and Ternary Oxide Systems by S. S. Nalimova, V. A. Moshnikov, Z. V. Shomakhov, V. M. Kondratev

“…The surface chemical composition and microstructure were studied using scanning electron microscopy, backscattered electron diffraction, and Xray photoelectron spectroscopy. …”
Get full text

Factorial-experimental investigation of LPBF regimes for VZh159 nickel superalloy grain structure and structural strength optimization by Rustam R. Kyarimov, Eugene S. Statnik, Eugene S. Statnik, Iuliia A. Sadykova, Alexander A. Frantsuzov, Alexey I. Salimon, Alexey I. Salimon, Alexander M. Korsunsky, Alexander M. Korsunsky, Alexander M. Korsunsky

“…Metallurgically sound samples (based on hydrostatic weighing data and microscopy, with practically no pores detected) were obtained with nine combinations of power and scanning speed, showing significant variation in the tensile strength (in the 1,040–1,220 MPa range) and yield strength (in the 560–1,100 MPa range), which correlated with the cross-sectional area of the single scan line (for example, the depth of the melt pool varied in the range 410–530 µm), while the average grain size (deduced from Electron Backscatter Diffraction (EBSD) images) remained statistically unchanged. …”
Get full text

Effects of precipitation morphology and matrix texture on mechanical performance for high-boron steel by Benxian Song, Xiang Geng, Chunyi Xie, Haiyang Fu, Jing Wang, Weijun Wang, Qiang Qi, Hai-Shan Zhou, Guang-Nan Luo

“…This study comprehensively analyzes the results of Vickers hardness, tensile test, scanning electron microscope, and electron backscatter diffraction. The findings indicate that the phases of 304B7-A are finer and more dispersed, resulting in a synergistic effect of grain refinement and grain boundary pinning, which significantly enhances the mechanical properties. …”
Get full text

Surface morphology, electronic defects and passivation strategies at the p–n junction of Cu(In,Ga)(S,Se)2 solar cells by Amala Elizabeth, Andreas May, Finnegan Volkamer, Florian Giesl, Hossam Elanzeery, Thomas Dalibor, Daniel Abou-Ras, Harry Mönig

“…In the present work, by applying high-resolution scanning probe techniques such as atomic force microscopy and scanning tunneling spectroscopy (STS), combined with electron backscatter diffraction, the morphology, the crystallographic orientation, and the defect electronic properties of CIGSSe thin-film surfaces were investigated. …”
Get full text

Evaluation on pipeline steel adaptability for extended hydrogen-contacting service by Yuanxing NING, Cuiwei LIU, Yuxing LI, Ming SONG, Huimin ZHANG, Qu'er CHEN, Mengze ZHU, Shiyao PENG, Junwen CHEN

“…The hydrogen permeation behavior was investigated through in-situ gas phase permeation tests combined with electron backscatter diffraction analysis. Finally, slow strain rate tensile tests and fatigue crack propagation tests were conducted at varying hydrogen blending ratios to assess the impact of hydrogen on the tensile and fatigue properties of 20 steel in service. …”
Get full text