Effect of Staggered Distance on Dynamic Recrystallization of Magnesium Alloy Bending Products by LI Feng, WANG Yan peng, ZHANG Xi jie

“…Traditional bending processes have many bottlenecks, such as long processing flow and difficulty in controlling bending characteristics The staggered extrusion (SE) process can realize the integration of extrusion and bending in a single pass The bending characteristics of bending products can be controlled by adjusting the staggered distance (h) of the stem The AZ31 bending products obtained by the staggered extrusion process was observed by EBSD The influence of the staggered distance on grain morphology, average grain size, grain boundary distribution, grain orientation and Schmid factor of bending products was investigated, respectively The results show that the dynamic recrystallization of AZ31 magnesium alloys occurs and the grains are refined with the increase of the h Because of the special structure of the stem, the number of grains parallel to the extrusion direction in the bending products increases, and the grains change from the original soft orientation to the hard orientation The above phenomena provide scientific guidance for the investigation of microstructure evolution in staggered extrusion of magnesium alloy bending products…”
Get full text

Investigation of the Structural Characteristics of the Gas Diffusion Layer Using Micro-X-Ray Computed Tomography by Qitong Shi, Cong Feng, Bing Li, Pingwen Ming

“…Therefore, it is of great practical significance to study the structural characteristics evolution of GDLs. The microstructure of the GDLs was obtained using micro-X-ray computed tomography in this study, and their structural properties were analyzed comprehensively and quantitatively. …”
Get full text

Influence of scanning patterns on residual stresses and mechanical properties in LPBF-manufactured cellular structures by Ahmed Abdelgawad, Imad Barsoum, Rashid K. Abu Al-Rub

“…However, residual stresses, distortion, and microstructure evolution must be controlled for broader industrial adoption. …”
Get full text

Study of Bauschinger Effect by Reverse Shearing of 70:30 Brass by Ehab A. El-Danaf

“…Microscopic study was conducted on the sheared samples to study the microstructure evolution during forward and reverse shear deformation. …”
Get full text

The Formation of Ferromanganese Crusts From the Western Mariana Ridge and Implications for Deep‐Water Environment Since the Late Pliocene by Linzhang Wang, Zhigang Zeng

“…Abstract Pacific Deep Water (PDW) plays a crucial role in the dynamics of the global thermohaline circulation. Understanding the evolution of the PDW is significant to reveal the global carbon cycle and its climatic responses. …”
Get full text

Soliton models of dislocation and acoustic emission in metallic materials by A. PAWEŁEK, S. PILECKI

“…The results are discussed in the context of rich experimental data (obtained at IMIM) which establish the correlations between the measured AE parameters and the plastic deformation mechanisms as well as microstructure evolution occurring in fcc single and polycrystals subjected to channel-die compression, especially at the liquid nitrogen temperature.…”
Get full text

Topography of the chimpanzee corpus callosum. by Kimberley A Phillips, William D Hopkins

“…Our results indicate chimpanzees display similar topography of the CC as humans, in terms of distribution of callosal projections and microstructure of fibers as determined by anisotropy measures.…”
Get full text

Effect of Sintering Temperature on Structural and Morphological Properties of Europium (III) Oxide Doped Willemite by Nur Fatin Syamimi, Khamirul Amin Matori, Way Foong Lim, Sidek Abdul Aziz, Mohd Hafiz Mohd Zaid

“…Phase composition, phase evolution, functional groups, and microstructure analysis were, respectively, characterized using X-ray diffractometer (XRD), fourier transform infrared spectroscopy, field emission scanning electron microscopy (FE-SEM), and energy-dispersive X-ray. …”
Get full text

Experimental Investigation of Mechanical Properties and Pore Characteristics of Hipparion Laterite Under Freeze–Thaw Cycles by Tengfei Pan, Zhou Zhao, Jianquan Ma, Fei Liu

“…Moisture content critically regulates pore microstructure evolution, reducing micropore proportion to 23.57–28.62% while promoting transformation to mesopores and macropores. …”
Get full text

Small- to Large-Scale Electron Beam Powder Bed Fusion of Functionally Graded Steels by Carlos Botero, William Sjöström, Emilio Jimenez-Pique, Andrey Koptyug, Lars-Erik Rännar

“…The FGMs obtained were characterized in terms of their microstructure and local and macromechanical properties. …”
Get full text

Assessment of industrial waste lignocellulosic fibers as a sustainable additive for improving engineering waste mud by Pan Ding, Menghuan Chen, Minjie Wen, Yiming Zhang, Lixing Wang

“…Finally, the reinforcement mechanism was revealed by combining mechanical performance and microstructural evolution. The results indicate that the addition of lignocellulosic fibers effectively enhances the mechanical strength and deformation resistance of the reinforced specimens compared to natural mud. …”
Get full text

Hot deformation behavior of In/CupIn/In composite thermal interface materials by Jie Zhang, Yulin Liu, Zhongnan Xie, Hong Guo, Mingmei Sun, Hui Yang, Xinbo He

“…The constitutive model and processing map were established, and the microstructure evolution was analyzed. The results show that the flow stress of the In/CupIn/In composite materials exhibit significant dependence on deformation rate and temperature. …”
Get full text

Controlling crystal orientation of Ni-based single crystal superalloy by inclined seeding method by YANG Shuai, BAO Jun, YANG Xiqiong, ZHENG Qiao, LIU Qian, ZHANG Jian, HU Songsong

“…An inclined seeding method for Ni-based single crystal superalloy with a specific orientation is presented. The evolution of solidification microstructure and its mechanism are studied during the preparation of single crystals by this method through experiment and numerical simulation. …”
Get full text

Iron-Nickel Microparticles in the Sedimentary Rocks as Indicators of Cosmic Processes by R.K. Sungatullin, A.I. Bakhtin, V.A. Tselmovich, G.M. Sungatullina, M.S. Glukhov, Yu.N. Osin, V.V. Vorob’ev

“…The microstructure, chemical and mineral composition of iron-nickel microparticles from the sedimentary deposits of the Peri-Caspian Depression were studied. …”
Get full text

The Mechanical Alloying Behavior of Fe2O3 into NiO in the High-Energy Ball-Milling Process by Y. Z. Zhu, Y. Liu, H. Huang, Y. Y. Guo, S. Y. Yin, F. W. Hu

“…XRD, SEM, DSC, and size measurements were preformed to study the microstructure evolution in the high-energy ball-milled mixture and the sintered ones, as well. …”
Get full text

Determination of Anisotropic Mechanical Properties for Materials Processed by Laser Powder Bed Fusion by Even W. Hovig, Amin S. Azar, Frode Grytten, Knut Sørby, Erik Andreassen

“…It was observed that both build orientation and postprocessing have strong influence on the anisotropic mechanical properties of the material. The effect of microstructure was also investigated and characterised. …”
Get full text

Study on Constitutive Characteristic of As-Cast AA6061 Alloy under Plane Strain Compression Based on Orthogonal Analysis by Fangcheng Qin, Huiping Qi, Yuehua Kang, Chongyu Liu

“…Constitutive relationship and microstructure evolution of as-cast AA6061 alloy were studied using plane strain compression (PSC) under the temperature of 300–450°C, the strain rate of 0.01–5 s−1, and the strain of 0.9. …”
Get full text

Atomistic Simulation of the Effect of Temperature on Mechanical Properties of some Nano-Crystalline Metals by Isaiah Eze Igwe, Yusuf Tajuddeen Batsari

“…In this investigation, the strain corresponding to yielding stress is observed to be lower with increasing temperature. Finally, the evolution of crystalline microstructure during the entire tensile process was investigated. …”
Get full text

The Shell of the Invasive Bivalve Species Dreissena polymorpha: Biochemical, Elemental and Textural Investigations. by Françoise Immel, Cédric Broussard, Bastien Catherinet, Laurent Plasseraud, Gérard Alcaraz, Irina Bundeleva, Frédéric Marin

“…By describing the microstructure, geochemistry and biochemistry/proteomics of the shell, the present study aims at promoting this species as a model organism in biomineralization studies, in order to establish a bridge with ecotoxicology, while sketching evolutionary conclusions. …”
Get full text

Comparison of Different Additives and Ages on Mechanical and Acoustic Behavior of Coal Gangue Cemented Composite by Meng Xiao

“…Control specimens without fillers were also tested for comparison. The microstructure of the specimens was examined using scanning electron microscopy (SEM). …”
Get full text