Effect of low aluminum additions in the microstructure and mechanical properties of hot forged high-manganese steels by Morales-Cruz E.U., Vargas-Ramírez M., Lobo-Guerrero A., Cruz-Ramírez A., Colin-García E., Sánchez-Alvarado R.G., Gutiérrez-Pérez V.H., Martínez-Vázquez J.M.

“…Samples of the as-cast steels were hot forged to 1100°C to obtain an overall reduction of 70 %. Microstructural evolution was studied using microscopy techniques (OM, and SEM-EDS) and X-ray diffraction measurements for the as-cast and hot forged steels. …”
Get full text

Effect of C and Mo Content on Microstructure and Short-term Properties of IN617 Heat-resistant Alloy by Liu　Qicong, Jia　Lei, Tang　Zhengxin, Li　Gen, Li　Ling, He　Guanze, He　Xikou

“…The effects of element content on the microstructure evolution and mechanical properties of IN617 alloy were systematically analyzed by scanning electron microscopy （SEM）， transmission electron microscopy （TEM）， electron probe microanalysis （EPMA）， differential thermal analysis （DSC）， thermodynamic calculation， tensile and impact tests.The results show that the secondary dendrite spacing can be significantly refined by appropriately increasing the content of C and Mo. …”
Get full text

Microstructure and corrosion resistance of laser powder bed fusion ODS-316L stainless steel by Qian Zheng, Yan Yin, Chao Lu, Zilin Li, Heng Zhu, Xiaoli Cui, Wenqing Shi, Xiao Liu, Ruihua Zhang, Di Tie

“…Aiming at the development requirements for the cladding materials of the Generation-IV Supercritical Water-cooled Reactors (SCWR), this paper fabricated the oxide dispersion strengthened 316L stainless steel (ODS-316L) by laser powder bed fusion (LPBF) technology and systematically investigated the influence mechanisms of volumetric energy density on the densification behavior, microstructure evolution, and corrosion resistance. The research shows that the uniform dispersion of Y2O3 nanoparticles on the surface of 316L powder can be achieved by ball milling. …”
Get full text

Effect of deformation temperature on microstructure and corrosion properties of hot-compressed 347H stainless steel by Qiushuang Wang, Ruidong Li, Junchen Li

“…This work uses electrochemical evaluation methods to study the corrosion behavior of 347H stainless steel after hot compression under different temperatures. …”
Get full text

Microstructure and Cerebral Blood Flow within White Matter of the Human Brain: A TBSS Analysis. by Stéphanie Giezendanner, Melanie Sarah Fisler, Leila Maria Soravia, Jennifer Andreotti, Sebastian Walther, Roland Wiest, Thomas Dierks, Andrea Federspiel

“…However, little is known about the cerebral blood flow in WM and its relation to WM microstructure. Recent improvements in measuring cerebral blood flow (CBF) by means of arterial spin labeling (ASL) suggest that the signal in white matter may be detected. …”
Get full text

Microstructural damage analysis during drilling in composite laminate with and without smart magneto-elastomer backup by Punit Patel, Vijaykumar Chaudhary, Dipal Patel, Ramesh Upadhyay, Sachin Patel

“…Nonetheless, a significant focus of this work is to elucidate the effect of thrust force reduction through microstructural evaluation of the drilled hole using a scanning electron microscope. …”
Get full text

Texture Analysis of T2-Weighted Images as Reliable Biomarker of Chronic Kidney Disease Microstructural State by Marcin Majos, Artur Klepaczko, Katarzyna Szychowska, Ludomir Stefanczyk, Ilona Kurnatowska

Get full text

DP600 Steel Stampability Analysis Through Microstructural Characterization by Electron Backscatter Diffraction and Nanoindentation by Rafael Guetter Bohatch, Alex Raimundo de Oliveira, Chetan P. Nikhare, Ravilson Antonio Chemin Filho, Paulo Victor Prestes Marcondes

Get full text

Effect of the microstructure on the corrosion behavior of a AlCuNiMn and AlCuNiMnSi high entropy alloys in a 3.5 wt% NaCl solution by Celine Chiong, Stella A. Quinones, Mckenna M. Hitter, Suresh Divi, Shailendra K. Varma, Christopher M. Bradley

Subjects: Get full text

Impact of temperature changes on the microstructure and mechanical characteristics of AISI 304 submerged in 5% HCl solution by Ayush Agarwal, Shlok Abhay Mohite, Prabhakar Bapurao More, Saurabh Dewangan

“…One plate was considered in ‘as received’ condition. To evaluate the various mechanical properties of the metal under immersion in HCl solution, various tests were performed such as tensile test, bending test, hardness test, microstructural analysis, and XRD which were compared with the same properties of untreated piece of metal. …”
Get full text

Effect of copper mine tailings and copper slag on the hydration, microstructure, and mechanical property in Portland cement by Hang Zeng, Sivakumar Ramanathan, Hee Jeong Kim

“…However, limited studies systematically compare CMT and CS with traditional SCMs in terms of hydration products and microstructural characteristics. And conflicting findings exist regarding their impact on mechanical performance and hydration mechanisms in Portland cement. …”
Get full text

Sex differences in maturational timing of amygdala and prefrontal cortex volumes and white matter tract microstructure by Jamie Roeske, Xiangyu Long, Meaghan V Perdue, Madison Long, Bryce Geeraert, Mohammad Ghasoub, Keith Owen Yeates, Catherine Lebel

“…While some studies provide support for the DMH, few have evaluated sex differences or examined both grey and white matter. …”
Get full text

Effect of Zr on inclusions and microstructure of non-quenched and tempered steel F38MnVS by Yucheng Wang, Yang Li, Zhouhua Jiang, Meng Sun, Shuai Ma, Yunqie Mao, Yanshuo Ma, Tianci Li, Dengyunfei Nie, Rui Yang

“…To examine the influence of Zr on the inclusions and microstructure of non-quenched and tempered F38MnVS steel, optical microscopy (OM), scanning electron microscopy (SEM), high-temperature laser confocal microscopy (HT-CLSM), transmission electron microscopy (TEM), and thermodynamic calculations among others are utilized. …”
Get full text

Effects of heat treatment on microstructure and properties of CrVNiAlCu high-entropy alloy by Bai Shijie, Xiao Yifeng, Wu Liang, Zhang Qiankun

“…This study employs X-ray diffraction, scanning electron microscopy, electrochemical workstations, and hardness testers to evaluate the impact of annealing temperatures (600, 700, and 800°C) on the microstructure and corrosion resistance of the CrVNiAlCu high-entropy alloy. …”
Get full text

Dry Sliding Wear Properties and Microstructure of 7075 Aluminum Alloy via Plasma Electrolytic Oxidation by SHI Yuan-ji, LI Jun-wan, GUO Xun-zhong, YU Lin-hui, LI Shuang, HUANG Hao

Get full text

Microstructure and magnetism of austenitic steels in relation to chemical composition, severe plastic deformation, and solution annealing by Kamila Hrabovská, Ondřej Životský, Petra Váňová, Yvonna Jirásková, Lucie Gembalová, Ondřej Hilšer

“…Abstract Three types of commercial austenitic stainless steels, 1.4307 (AISI 304 L), 1.4404 (AISI 316 L) 1.4845 (AISI 310 S) with different chemical compositions, are subjected to severe plastic deformation at room temperature by a unique Dual Rolling Equal Channel Extrusion (DRECE) method. Its impact is evaluated from the viewpoint of microstructure analyses, X-ray diffraction, and macroscopic magnetic properties completed by microscopic Mössbauer characteristics. …”
Get full text

Effect of Cooling Rate on Microstructure and Mechanical Properties According to Heat Treatment Temperature of Inconel 625 by Minha Park, Gang Ho Lee, Hyo-Seong Kim, Byoungkoo Kim, Sanghoon Noh, Byung Jun Kim

“…When manufacturing a hot forged flange with a thick and complex shape, the cooling rate varies depending on the location due to the difference in thermal gradient during the cooling process after hot forging. In this study, to evaluate the microstructure and mechanical properties of Inconel 625 according to the cooling rate, we performed heat treatment at 950°C, 1050°C, and 1150°C for 4 hours followed by water cooling. …”
Get full text

Observation of Microstructural Characteristics on the Formability for AA 7075 Alloy Sheets Under Warm Forming Conditions by Chen Wan-Ling, Lee Rong-Shean

“…The correlation between microstructural characteristics and formability was then investigated. …”
Get full text

Microstructure of Al-Si Slurry Coatings on Austenitic High-Temperature Creep Resisting Cast Steel by Agnieszka E. Kochmańska

“…This paper presents the results of microstructural examinations on slurry aluminide coatings using scanning electron microscopy, X-ray microanalysis, and X-ray diffraction. …”
Get full text

Quantitative study of the effect of tissue microstructure on contraction in a computational model of rat left ventricle. by Valentina Carapella, Rafel Bordas, Pras Pathmanathan, Maelene Lohezic, Jurgen E Schneider, Peter Kohl, Kevin Burrage, Vicente Grau

“…Tissue microstructure, in particular the alignment of myocytes (fibre direction) and their lateral organisation into sheets, is fundamental to cardiac function. …”
Get full text