Evaluation of the Performance and Microstructure of Ecofriendly Construction Bricks Made with Fly Ash and Residual Rice Husk Ash by Chao-Lung Hwang, Trong-Phuoc Huynh

Get full text

Microstructure and Reciprocating Sliding Wear Resistance Evaluation on SiMo Ductile Iron Low Alloyed with Cobalt by Eduardo Colin-García, Alejandro Cruz-Ramírez, Marisa Moreno-Ríos, Ricardo Gerardo Sánchez-Alvarado, José Antonio Romero-Serrano, Juan Cancio Jiménez-Lugos, Armando Irvin Martínez-Pérez, Edgar Ernesto Vera-Cárdenas

“…In this work, two SiMo ductile irons with similar levels of silicon, 0.3% Mo (DI-0.3Mo) and 0.6% Mo with 0.8% Co (DI-0.6Mo-0.8Co), were evaluated to determine the effect of molybdenum and cobalt on the microstructure, hardness, and wear performance at room temperature. …”
Get full text

Evaluations of Microstructure in Ultra-Fine-Grained Matrix with Sintering-Assisted ECAP Process in Aluminum–Nickel Powders by Ahmet Güral, Ümit Demir

“…The scanning electron microscope (SEM) images were received for the microstructural evaluations. According to the SEM images, it was understood according to the quantitative observation and energy dispersive spectroscopy (EDS) analysis results that the Ni powders added to Al mostly remained in the block state in the matrix structure after the ECAP processes but started to dissolve in the matrix by increasing the ECAP pass number and sintering temperature. …”
Get full text

Non-Destructive Evaluation of Microstructural Changes Induced by Thermo-Mechanical Fatigue in Ferritic and Ferritic/Martensitic Steels by Madalina Rabung, Kevin Schmitz, Oguzhan Sanliturk, Patrick Lehner, Bastian Blinn, Tilmann Beck

“…While the P91 did not show any systematic changes in micromagnetic measurements, which generally correlate with the evolution of the microstructure and the mechanical properties, for the HiperFer-17Cr2, pronounced changes in the micromagnetic properties were observed. …”
Get full text

Effect of the Addition of Graphene Oxide (GO) to Reactive Powder Concretes (RPC): Physical, Mechanical, and Microstructural Evaluation by Alan Rodrigo Sorce, Rodrigo Mantovani Bernardes, Igor Rafael Buttignol de Oliveira, Giovanna Raizer da Silva, Ana Paula Margarido, Sylma Carvalho Maestrelli

Get full text

Strength and microstructural evaluation of sustainable geopolymer mortars using calcium carbonate sludge and fly ash as precursors by Menglim Hoy, Soe Thandar, Suksun Horpibulsuk, Avirut Chinkulkijniwat, Apichat Suddeepong, Apinun Buritatum, Teerasak Yaowarat, Teerat Tesanasin, Jitwadee Horpibulsuk, Mantana Julvorawong

Get full text

Digital reconstruction of three‐dimensional contours and its application to microstructural evaluation of postblast rock fissure surfaces by Yanbing Wang, Zhaoyang Wang, Dairui Fu, Mingwei Gang

“…Abstract Fracture surface contour study is one of the important requirements for characterization and evaluation of the microstructure of rocks. Based on the improved cube covering method and the 3D contour digital reconstruction model, this study proposes a quantitative microstructure characterization method combining the roughness evaluation index and the 3D fractal dimension to study the change rule of the fracture surface morphology after blasting. …”
Get full text

THE BONE MICROSTRUCTURE IDENTIFICATION MODEL BASED ON BACKSCATTER MODE OF ULTRASOUND by Umiatin Umiatin, Tora Oktaviana, Endang Wijaya, Riandini Riandini, Farhan Yusuf

“…Osteoporosis is defined by a decrease in bone mass and a deterioration in bone microstructure. It is a major public health issue and a significant economic burden for both individuals and society. …”
Get full text

Estimation of Elasticity of Porous Rock Based on Mineral Composition and Microstructure by Zaobao Liu, Jianfu Shao, Weiya Xu, Chong Shi

“…This study illustrates the estimation of the elastic compressibility of sandstone (ECS) based on the assumption that the ECS is determined closely by the mineral composition and microstructures. In this study, 37 samples are collected to evaluate the estimations of the ECS obtained by different methods. …”
Get full text

Effect of chromium and titanium on the microstructure and mechanical properties of cast steel by Białobrzeska B., Jasiński R., Dziurka R., Bała P.

“…In this work, the influence of chromium and titanium on the microstructure and mechanical properties of cast steel is investigated. …”
Get full text

Study on the effect of water on the shear behavior and microstructure of red mudstone by Qingyu Xie, Qiangbing Huang, Xiaosen Kang, Shaoyan Wu, Hengxing Lan

Get full text

Effect of Carrot Juice on the Texture Properties, Rheology, and Microstructure of Yoghurt by Li-Ying Bo, Zhi-Qin Pan, Tian-Ying Sun, Guo-Jun Du, Duo Zhang, Zhi-Qiang Song, Chun-Li Song, Ren Jian

“…The influence of carrot juice on the lactic acid content, chemical composition, syneresis, texture, rheology property, and microstructure was evaluated along with a potential of carrot juice as an ingredient with rich dietary fiber and a firm structure with interaction of milk protein and a complex matrix under acidification. …”
Get full text

Influence of Xanthan gum on the engineering properties and microstructure of expansive soils by Miao Ouyang, Hongri Zhang, Hongri Zhang, Guiyao Wang, Youjun Li, Jianping Song

Get full text

Effects of nanomodifiers on rheological, chemical, and microstructural properties of asphalt mastics by Sandra Matarneh, Nawal Louzi, Ibrahim Asi, Mu'tasim Abdel-Jaber, Eyad Masad

“…This research examines the impact of three nano-modifiers/fillers—Nano Hydrated Lime (NHL), Nano Clay (NC), and Nano Olive Husk (NOH) on the rheological, chemical, and microstructural characteristics of asphalt mastic in both unaged and short-term aged (RTFO-aged) conditions. …”
Get full text

Microstructural, mechanical, and high-speed cutting properties of Ti(C, N)–(Ti, W, Re)(C, N)–(W–Re) cermets with core–rim microstructure by Takashi Murakami, Jonny Herwan, Ichiro Ogura, Atsushi Korenaga

“…In this study, Ti(C, N)–(Ti, W, Re)(C, N)–(W–Re) cermet (TWR) specimens with a Ti(C, N) core–(Ti, W, Re)(C, N) rim microstructure were prepared by sintering blended TiC0.5N0.5, W, and Re fine powders to improve the mechanical and high-speed cutting characteristics of Ti(C, N)–(Ti, W)(C, N)–W cermet (TW) specimens. …”
Get full text

Design and fabrication of a SiC chiral lens using spiral microstructures by Zihan Zhang, Jia Mao, Yiyuan Pao, Linghao Zou, Hsin-Han Peng, Hsiang-Chen Chui

Get full text

The Microstructures and Properties of Cu-Ni-Co-Si Alloys: A Critical Review by Fang Li, Wenteng Liu, Chao Ding, Shujuan Wang, Xiangpeng Meng

“…This review discusses various synthesis techniques, including casting, vacuum induction melting, and additive manufacturing, and evaluates their effects on the formed microstructures. …”
Get full text

Tailored 3D Lattice Microstructures for Enhanced Functionality in Blood‐Gas Exchange by Kai P. Barbian, Teresa Lemainque, Ina Grunden, Roman Iwa, Bettina Wiegmann, John Linkhorst, Matthias Wessling, Jan Heyer, Ulrich Steinseifer, Michael Neidlin, Sebastian V. Jansen

Get full text

Mechanical Characterization of Porous Bone-like Scaffolds with Complex Microstructures for Bone Regeneration by Brandon Coburn, Roozbeh Ross Salary

Get full text

Observation of Microstructural Characteristics on the Formability for AA 7075 Alloy Sheets Under Warm Forming Conditions by Chen Wan-Ling, Lee Rong-Shean

“…The correlation between microstructural characteristics and formability was then investigated. …”
Get full text