Design-LIME: An Interpretable Visualization Method for Electric Motor Design Based on Deep Learning by Kazuhisa Iwata, Hidenori Sasaki

“…The proposed TO method improves search performance by 18.7% when compared with the conventional single-step optimization method. …”
Get full text

RESEARCH ON SOLUTION METHOD OF CONTACT STIFFNESS OF CURVIC COUPLINGS CONSIDERING TOOTH SURFACE ROUGHNESS by MA Wu, WANG AiLun, WANG Hai, YANG ZhengLie

“…Aiming at the problem that the contact stiffness analysis method of curvic couplings can not consider the contact interface microscopic morphology,an analytical model of the contact interface stiffness was proposed.Through the stress analysis and stiffness transformation,the general model of curvic couplings contact interface stiffness was obtained,and the GW rough surface model was brought into it to obtain the specific curvic couplings contact interface stiffness formula based on the GW rough surface model.Finally,the analytical model results were compared with finite element results.The effect of surface topography on the contact stiffness of curvic couplings was obtained,and the relationship between the normal contact stiffness and the tangential contact stiffness with the preload and tangential force were obtained.The research shows that the analytical model matches well with the finite element results,which proves the rationality of the analytical model and provides a theoretical reference for the preload force and torque design of the rotors with curvic couplings.…”
Get full text

Adaptive torque feed-forward control for wind turbine MPPT considering predicted wind speed characteristics by Liangwen Qi, Min Zhao, Songsong Wu, Xiaohan Zhang, Pengfei Meng, Yong Zhao, Wei Deng

“…The approach integrates a Kalman observer for aerodynamic torque estimation and employs the Newton-Raphson method to derive real-time wind speed. …”
Get full text

The impact of everyday usage of different dental implant torque wrenches on their performance accuracy and repeatability: An in vitro study by Ilić Gavrilo, Milić-Lemić Aleksandra, Vulović Stefan, Marković Aleksa, Lazić Zoran, Dragović Miroslav, Todorović Aleksandar

“…Conclusion. Compared to toggle-type, the beam-type wrenches offer greater accuracy in achieving the target torque value. …”
Get full text

Simultaneous Estimation of Wrist Joint Angle and Torque During Isokinetic Contraction Based on HD-sEMG by Mingjie Yan, Zhe Chen, Jianmin Li, Jinhua Li, Lizhi Pan

“…The establishment of a natural and smooth human-computer interface is crucial for myoelectric control, which requires an effective decoding method for movement intention. …”
Get full text

On the Hydrodynamic and Structural Performance of Thermoplastic Composite Ship Propellers Produced by Additive Manufacturing Method by Erkin Altunsaray, Serkan Turkmen, Ayberk Sözen, Alperen Doğru, Pengfei Liu, Akile Neşe Halilbeşe, Gökdeniz Neşer

“…In the marine industry, the search for sustainable methods, materials, and processes, from the product’s design to its end-of-life stages, is a necessity for combating the negative consequences of climate change. …”
Get full text

Combined effect of undersized surgical technique and axial compression on the primary implant stability and host bone architecture by Afsheen Tabassum, Gert J. Meijer, Vincent M.J.I. Cuijpers, X. Frank Walboomers

“…Results: For approaches 2, 3, and 4 (P < .05), insertion-torque values were significantly higher as compared to approach 1. …”
Get full text

An Effective Method for Calculation of Mutual Inductance Between Rectangular Coils at Arbitrary Positions in Space by Junlin Chen, Guofeng Yao, Min Wang, Liming Zhou, Kuiyang Gao, Peilei Zhou, Ruiyao Liu

“…The accuracy of the proposed method’s calculations is validated using data from the published literature, and the computation time is compared with that of other methods. …”
Get full text

A New Compensation Method for DRR of a Roll-Pitch Seeker Based on ESO by Yue Li, Wei Li, Xiaodong Liu, Qunli Xia

“…Mathematical simulation is established to compare the new ESO-based DRR compensation method with the existing methods such as the feedforward method and Kalman filter method. …”
Get full text

Investigation of The Effect of Design Variables on Slip Assembly: Spline Module and Slip Length by Hüseyin Özgürler, Mert Can Kahyalar, Onur Şen

“…Thus, the analytical method can be preferred instead of the finite element analysis (FEA), especially considering that the FEA is a time consuming method compared to the analytical method in the design process.…”
Get full text

Model Predictive Control Method with Constant Switching Frequency to Reduce Common-Mode Voltage for PMSM Drives by Hao Li, Shuo Chen, Xiang Wu, Guojun Tan

“…The duty ratio calculating method for the selected four VVs is studied. Compared with the conventional MPC-RCMV method, the current and torque ripples are greatly reduced and the switching frequency is fixed. …”
Get full text

A Beat Frequency Suppression Control Method Based on a Second-order Generalized Integrator by Rong LIU, Ke CHEN, Tiangui RAO

“…At the same time, the two optimization strategies were compared, and the optimization of the control method was realized according to the pulsation suppression effect. …”
Get full text

Learning the non-proportional multiaxial elastic–plastic response of an aluminium alloy with neural networks by Burcu Tasdemir, Antonio Pellegrino, Xinyu Su, Vito L. Tagarielli

Get full text

A novel metaheuristic approach for simultaneous loss minimization and torque ripple reduction of DTC- IM driven EV by Anjan Kumar Sahoo

“…However, these methods have convergence issues at optimal values, require large memory spaces, have higher computational complexity, and are difficult to implement. …”
Get full text

TORQUE RIPPLE RATE REDUCTION OF 6/4 SWITCHED RELUCTANCE MOTOR USING SLIDING MODE LEARNING CONTROLS by Zahraa Razaq Mohammed, Abdal-Razak Shehab Hadi

“…The research also includes the design of the controller and simulation results that demonstrate the effectiveness of the proposed method in reducing torque ripple. The learning sliding mode control with PID has a significant implication for reduction torque ripple rate improvement of about 70% compared to the conventional model. …”
Get full text

Design and Analysis of a Low Torque Ripple Permanent Magnet Synchronous Machine for Flywheel Energy Storage Systems by Yubo Sun, Zhenghui Zhao, Qian Zhang

“…Therefore, a PMSM with eccentric permanent magnets is proposed and analyzed in this article to reduce torque ripple. Cogging torque, a significant contributor to torque ripple, is investigated by a combination of finite element analysis and the analytical method. …”
Get full text

Modeling and Investigation of the Velocity-Dependent Cutting Process with PDC Cutters Using the Discrete Element Method by Zhiyi Fu, Georg-Peter Ostermeyer, Armin Kueck, Frank Schiefer, Hanno Reckmann, Xu Huang, John Bomidi

“…In this paper, a modified bonded-particle model (discrete element method, DEM) for rock in deep drilling environments is applied to the pressurized cutting process. …”
Get full text

Enhancing Performance Toward Torque and Flux Control Through a Hybrid Approach of Intelligent and DTC for SRM Drives by Deepak Mohanraj, M Umavathi, Rajesh Verma, Bharatiraja Chokkalingam, Lucian Mihet-Popa

“…The proposed method employs a multi-objective function to fully exploit the torque production capability of the SRM, minimize torque ripple, and enhance operational efficiency. …”
Get full text

The Impact of Blade Surface Roughness on Wind Turbine Efficiency: A Monte Carlo Method Approach by Dariush Biazar, Amard Afzalian

Get full text

An integrated approach to posterior anchorage preparation and incisor torque compensation in premolar extraction cases using clear aligners by Ruyue Qiang, Junjie Wu, Jie Gao, Haiwen Chen, Jianing Xu, Zuolin Jin, Yanning Ma

“…Molar anchorage control improved with incisor torque compensation of 0.08 degrees. Tipping was more pronounced in the maxillary arches compared to the mandibular arches. …”
Get full text