-
341
Design optimization of the podded propulsor considering pod housing drag and propulsion motor performance
Published 2025-01-01“…A genetic algorithm was used to optimize the POD with bi-objective and tri-objective focuses on minimizing drag, maximizing motor efficiency and power density. Pareto-optimal designs were validated through simulations. The results show that tri-objective optimization increased the overall efficiency by about 4.2% and enhanced motor power density by around 22%.…”
Get full text
Article -
342
Nonpenalty Machine Learning Constraint Handling Using PSO-SVM for Structural Optimization
Published 2021-01-01“…Furthermore, as demonstrated by the Warren truss beam problem, this new algorithm provides an optimal structural design which represents also a good solution from the technical point of view with a trivial rounding-off that does not jeopardize significantly the optimization design process.…”
Get full text
Article -
343
Assessment of the Feasibility of Using a Synchronous Homopolar Motor Instead of an Induction Motor in a Traction Drive With a Wide Constant Power Speed Range
Published 2024-01-01“…This article conducts a theoretical analysis comparing optimized designs of IM and SHM for driving a mining dump truck with a payload of 90 tons. …”
Get full text
Article -
344
Unveiling the multifunctionality of iron oxide nanoparticle: A synergistic experimental and computational investigation
Published 2025-06-01“…Computational tools like DFT provide insights into material properties, enabling optimized design for drug delivery, imaging, dye degradation, and water remediation applications.…”
Get full text
Article -
345
Study of thermal management system for battery box for formula student electric racing car
Published 2025-02-01“…Additionally, the optimized system achieves a more uniform temperature distribution across the battery pack, outperforming the pre-optimization design in all evaluated metrics. The optimized cooling system demonstrates a significant improvement in thermal performance compared to the original design. …”
Get full text
Article -
346
IbI logics optimization algorithm-based high-order sliding mode control for DSIG within a wind turbine system
Published 2025-03-01“…The HIL findings through comparative study further confirm the superiority of the optimally designed controllers over the conventional ones, highlighting significant enhancements in dynamic, steady-state, THD, and some other metrics. …”
Get full text
Article -
347
Assessment of the influence of gap wall mobility factor at calculation of leakage in working section of a scroll compressor. Part 1
Published 2023-03-01“…It will raise accuracy of the received results which can serve as a base to prognosis of optimum characteristics of the compressor, due to their approximation and will allow to optimize designing of refrigerating machines at the chosen modes of work. …”
Get full text
Article -
348
Design Optimization of an Integrated E-Type Multilink Suspension Wheel-Side Drive System and Improvement of Vehicle Ride Comfort
Published 2021-01-01“…The bushing stiffnesses were determined through tests, and the feasibility of each bushing installation was determined via elastic kinematic simulation of the integrated E-type multilink wheel-side drive system; then, optimization design of bushing stiffness was carried out for ride smoothness. …”
Get full text
Article -
349
Study on the Influence of Connected Vehicle Fog Warning Systems on Driving Behavior and Safety
Published 2022-01-01“…This study provides a reference for the studies on connected vehicle technology based on driving simulators and supports the optimization, design, and evaluation of connected vehicle fog warning systems.…”
Get full text
Article -
350
Design for Additive Manufacturing of Lattice Structures for Functional Integration of Thermal Management and Shock Absorption
Published 2025-01-01“…Additive manufacturing facilitates the production of complex structures by allowing parts consolidation, resulting in optimized designs, where multiple functions are integrated into a single component. …”
Get full text
Article -
351
Reverse design of broadband sound absorption structure based on deep learning method
Published 2025-01-01“…With the total mass and average sound absorption coefficient of sound-absorbing materials as targets, the NSGA-II algorithm has been used for multi-objective optimization design. The optimized average sound absorption coefficient increased by 4.84%, and the total material mass was reduced by 18.98%.…”
Get full text
Article -
352
Influence of drilling incidence angle on the drilling force distribution of pneumatic impactor
Published 2025-01-01“…The analysis results provide references for the mechanical structural optimization design and use of pneumatic impactor.…”
Get full text
Article -
353
Study on Global Parameters Optimization of Dual-Drive Powertrain System of Pure Electric Vehicle Based on Multiple Condition Computer Simulation
Published 2020-01-01“…As for such differences, this paper adopts intelligent algorithm to design the parameters of the transmission system and introduces the genetic algorithm into the optimization design of parameters to obtain the optimal vital parameters of the power transmission system based on computer simulation. …”
Get full text
Article -
354
Dynamic Analysis of the Scraper Conveyor under Abnormal Operating Conditions Based on the Vibration and Speed Characteristics
Published 2021-01-01“…This study provides a basis and reference for the further optimization design of the chain drive system and detection of the abnormal working conditions.…”
Get full text
Article -
355
Multi-Scale Modeling and Optimization of Single-Layer Reticulated Shell Structures Using Multi-Point Constraint and Variable Density Methods
Published 2025-01-01“…The development of topology optimization and additive manufacturing technology broadens the space for optimization design, and provides new ideas for advanced design to integrate intelligent manufacturing.…”
Get full text
Article -
356
Approximate Solutions of Combinatorial Problems via Quantum Relaxations
Published 2024-01-01“…Combinatorial problems are formulated to find optimal designs within a fixed set of constraints and are commonly found across diverse engineering and scientific domains. …”
Get full text
Article -
357
Research on evaluation of basic railway safety management capability based on combination weighting – TOPSIS
Published 2025-02-01“…Purpose – To systematically characterize and objectively evaluate basic railway safety management capability, creating a closed-loop management approach which allows continuous improvement and optimization. Design/methodology/approach – A basic railway safety management capability evaluation index system based on a comprehensive analysis of national safety management standards, railway safety rules and regulations and existing safety data from railway transport enterprises is presented. …”
Get full text
Article -
358
Design and optimization of liquid helium-free cooling systems for magnetic resonance imaging device using multi-physical modeling
Published 2025-02-01“…Additionally, using copper foam with lower porosity and larger particle diameter further improved system performance, achieving cool-down times of 164 h for nitrogen and 58 h for helium, with pressure drops of 1.48 kPa and 1.49 kPa, respectively. This optimized design and the developed models offer a robust framework for guiding the design and control of liquid helium-free MRI cooling systems, contributing to the advancement of sustainable and cost-effective MRI technology.…”
Get full text
Article -
359
Research on the bearing performance of HSCA high-strength preloaded expansion piles in calcareous sand foundation
Published 2025-01-01“…The research outcomes provide important guidance for the optimization, design, and construction of high-strength preloaded expansion piles in calcareous sand foundations.…”
Get full text
Article -
360
Research on “Identification–Cognition–Perception” of the Pedestrian Spaces Around Subway Stations near Popular Tourist Attractions from the Tourists’ Perspective: A Case Study of T...
Published 2025-01-01“…This paper establishes an optimization design framework for the pedestrian spaces around subway stations near urban popular tourist attractions, moving from identification to cognition and perception. …”
Get full text
Article