Exploring Key Considerations for Artificial Intelligence Robots in Home Healthcare Using the Unified Theory of Acceptance and Use of Technology and the Fuzzy Analytical Hierarchy P... by Keng-Yu Lin, Kuei-Hu Chang, Yu-Wen Lin, Mei-Jin Wu

Get full text

Deteksi Land Surface Temperature Menggunakan Citra Landsat: Studi Kasus Kota Jababeka dan Sekitarnya by Abdul Rohman Zaky, Suhendra Suhendra, Muhammad Ayub Arwin

“…Hasil kajian didapatkan bahwa kenaikan nilai rata-rata LST sebesar 3.03 ºC antara tahun 1990 dengan tahun 2000, dan terjadi penurunan nilai rata-rata LST berturut-turut pada interval periode selanjutnya yaitu sebesar 2.39 ºC antara tahun 2000 dengan tahun 2010 dan sebesar 0.54 ºC antara tahun 2010 dengan tahun 2020. …”
Get full text

Experimental investigation on the formation mechanism of the TiFe alloy by the molten-salt electrolytic titanium concentrate by Shi R., Bai C., Hu M., Liu X., Du J.

“…In this study, the electrolytic voltage was fixed at 3.1V, and three different temperatures were applied: 850oC, 875oC and 900ºC. Finally, the product was examined by SEM and XRD to determine the phase transformation after the electrolysis. …”
Get full text

DEVELOPMENT OF MELTED EXPANDED POLYSTYRENE AS ΒITUMEN MODIFIER FOR PAVEMENT CONSTRUCTION by AREMU TAJUDEEN ORIAJE, BAMIDELE IBUKUNOLU OLUGBEMI DAHUNSI, KAZEEM ADEKUNLE ADEYEMO

“…The EPS materials were ground and then melted (200-400 oC) to form a slurry. Specific gravity of the EPS and chemical composition were determined by AAS analyses. …”
Get full text

Evaluation of The Use R450A as an Alternative to R134a in Low and Medium Temperature Heat Pump Systems: 4-E (Energy, Exergy, Environmental and Enviro-Economic) Analysis by Ragıp Yıldırım

“…The thermodynamic and environmental analyses have been made for two heat source temperatures (10 oC and 20 oC) and six heat sink temperatures (from 30 oC to 55 oC). …”
Get full text

Heat Analysis of a Vacuum Flask by Chidebe Stanley Anyanwu, Abdelrahman Gad, Hussein Bilal, Daniel Raphael Ejike Ewim

“…This design allows the hot fluid to be at 55 oC after 10 hours in atmospheric conditions. The temperature of the coffee in the vacuum flask made of steel layers with aerogel as insulation was 72.3 oC after 10 hours, while the steel layers and CO2 insulation were 67.9 oC and the acrylic layer and aerogel were 77.89 oC after a 10-hour duration in still air. …”
Get full text

Polos fríos en el Calar de Hernán Pelea y Cabrilla (Jaén, España), factores sinópticos y de microescala by David Espín Sánchez, Carmelo Conesa García, Jorge Olcina Cantos

“… Los extensos e inhóspitos calares ubicados en las Sierra de Segura y Cabrilla (divisoria entre las demarcaciones hidrográficas del Segura y Guadalquivir) presentan un estereotipo microclimático caracterizado por inviernos extremadamente fríos, con temperaturas mínimas absolutas cercanas a -30ºC en invierno, y -10ºC y -15ºC en otoño y primavera respectivamente. …”
Get full text

Optimización de hornos industriales para deshidratado de ciruelas by D. P. URFALINO, J. WORLOCK

“…Los tiempos de residen- cia en los hornos a 78 y 82o C presentaron diferencias estadísticamente significativas. …”
Get full text

The spaces OM and OC are ultrabornological a new proof by Jan Kucera

“…In [1] Laurent Schwartz introduced the spaces 𝒪M and 𝒪′C of multiplication and convolution operators on temperate distributions. …”
Get full text

Effectiveness of Nigerian Bamboo Activated with Different Activating Agents on the Adsorption of BTX by FT Ademiluyi, O Braide

“…A series of activated carbons was prepared from Nigerian bamboo, carbonized at 400oC – 500oC and impregnated with different concentrations of four acids at 800oC in a muffle furnace for 2 hours. …”
Get full text

Effectiveness of Nigerian Bamboo Activated with Different Activating Agents on the Adsorption of BTX by FT Ademiluyi, O Braide

“…A series of activated carbons was prepared from Nigerian bamboo, carbonized at 400oC – 500oC and impregnated with different concentrations of four acids at 800oC in a muffle furnace for 2 hours. …”
Get full text

A Study of Accelerated Aging and Seed Storage on the Germination of Anaphalis longifolia (Blume) Blume ex.DC. by Muhammad Imam Surya, Suluh Normasiwi

“…Freezer with temperature -20 oC is recommended to storage A. longifolia for long periods.…”
Get full text

Investigation of the spatial and temporal long-term hydro-climatic trends in Upper Omo Gibe Basin, Ethiopia by Eyasu Tafese Mekuria, Tamene Adugna Demissie, Fekadu Fufa Feyessa

“…In spring, summer, autumn, and winter seasons the maximum significantly increasing trend (P < 0.05) of maximum temperature was 0.25 oC/year, 0.15 oC/year, 0.043 oC/year, and 0.082 oC/year respectively whereas the annual maximum significantly increasing trend was 0.083 oC/year. …”
Get full text

Hormonal and Temperature Manipulation to Produce Male Homogametic (XX) in Developing Female Monosex Culture of Thai Catfish Pangasionodon hypopthalmus by H. Arfah, O. Carman

“…Experiment was performed to get male homogametic (XX) that will be used as functional male to produce female monosex (XX) population Result of hormonal and temperature manipulation on larvae shown that the highest percentage of male (67.7%) was obtained by 5 mg/liter 17-α-metiltestosteron treatment with temperature 33oC. Good temperature for larva rearing was 30oC. …”
Get full text

Fabrication and Characterization of Copper System Compound Semiconductor Solar Cells by Ryosuke Motoyoshi, Takeo Oku, Atsushi Suzuki, Kenji Kikuchi, Shiomi Kikuchi, Balachandran Jeyadevan, Jhon Cuya

“…The microstructure and cell performance of the CuO/C60 heterojunction and the Cu2O:C60 bulk heterojunction structure were investigated. …”
Get full text

Effect of Traditional Process Methods on the Physicochemical and Functional Properties of a Traditional Food Salt (Nikkih) Obtained from Waste Biomass Peels of Musa paradisiaca and... by Pride Ndasi Ngwasiri, Vivian Akah Adanmengwi, Wilson Agwanande Ambindei, Noumo Thierry Ngangmou, Dobgima John Fonmboh, Ngwa Martine Ngwabie, Martin Benoit Ngassoum, Ejoh Richard Aba

“…All samples were dried and combusted to ash at varying temperatures of 250oC, 300o C, and 350oC and times of 30 min, 60 min, and 90 min. …”
Get full text

Nutritional components in instant porridge fortified with fermented lebui beans by Wahyu Mushollaeni, Atina Rahmawati

“…The research used quantitative method analysis such us ANOVA with a factorial randomized block design with temperature (50oC and 60oC) and drying time (5, 6, 7, and 8 hours) as factors. …”
Get full text

Thermal behavior of ground talc mineral by Balek V., Šubrt J., Pérez-Maqueda L.A., Beneš M., Bountseva I.M., Beckman I.N., Pérez-Rodríguez J.L.

“…ETA results revealed a closing up of surface micro-cracks and healing of microstructure irregularities on heating in the range 200-500ºC of both un-ground and ground talc samples. For the ground talc sample a crystallization of non-crystalline phase into orthorhombic enstatite was characterized as by a decrease of radon mobility in the range 785-825ºC and by a DTA exothermal effect with the maximum at 830ºC. …”
Get full text

Effect of Heating at Various Temperatures for 30 Minutes on Pathogenicity of White Spot Syndrome Virus (WSSV) in Tiger Prawn (Penaeus monodon Fabr.) by D. Priatni, M. Alifuddin, D. Djokosetiyanto

“…Pada penelitian ini, inaktivasi WSSV dilakukan menggunakan pemanasan pada suhu berbeda, yaitu 45, 50, 55 dan 60oC selama 30 menit.  Hasil penelitian menunjukkan bahwa infeksi PL-15 menggunakan virus WSSV yang telah diinaktivasi dengan pemanasan pada suhu 45oC dan 60oC dapat meningkatkan daya tahan udang.  …”
Get full text

Physicochemical characteristic of Exudate of <i>Dacryodes edulis</i> by Itoro Esiet Udo, Gloria Obuzor, Michael Horsfal Jnr

“…The Present work deals with the study of exudate of Dacryodes edulis with regards to various seasonal  physicochemical properties of the purified solids exudate, acid hydrolysis product and saponification product like charring temperature (oC) (195.73 ± 4.75, 190 ± 7.9, 190 ± 3.4, ); flash point (oC) (105 ± 5.0, 100 ± 7.9, 100 ± 3.4); moisture content % (1.32 – 1.35, 1.05 – 1.08, 1.00 - 1.10); ash content (%) (1.77 – 1.85, 1.21 – 1.31, 1.26 -1.37); lignin content (%) (7.77 – 7.85, 6.21 – 6.31, 5.26 – 5.37); electrical conductivity (μS/cm) (28.40 -29.20, 32.10 – 33.00, 30.30 – 30.90); density (g/cm3) (0.76 -0.77, 0.94 – 0.98, 0.88 – 0.98); melting point (oC) (61.08 – 73.35, 58.69 – 73.35, 55.35 – 65.67). …”
Get full text