-
1361
A probabilistic model-based approach to assess and minimize scaling in geothermal plants
Published 2025-01-01“…The proposed modelling framework to demonstrate the optimization under uncertainty workflow consists of a multiphase flow solver coupled with a geochemistry model and an uncertainty quantification workflow to locally estimate the probability of precipitation potential, including its impact on the hydraulic efficiency of the geothermal plant by increasing the roughness and/or decreasing the diameter of the casings and pipelines. …”
Get full text
Article -
1362
Overall Stability Analysis of Xiluodu High Arch Dam Based on Fine Three-Dimension Numerical Modeling
Published 2021-01-01“…The RFPA3D is used to establish a superlarge fine model to study the overall stability of the high arch dam, which provides an effective method for analysis and research of other large hydraulic projects in the world.…”
Get full text
Article -
1363
An Efficient and Robust Method to Predict Multifractured Horizontal Well Production in Shale Oil and Gas Reservoirs
Published 2021-01-01“…Shale oil and gas reservoirs are developed by MFHWs. After large-scale hydraulic fracturing, it is hard to forecast the production rate using the theoretical method. …”
Get full text
Article -
1364
Using stone dust as an improvement material for cement gravel column
Published 2025-07-01“…The results confirm that CG meets porous concrete’s hydraulic conductivity and mechanical performance requirements. …”
Get full text
Article -
1365
An Experimental and Numerical Study of Landslides Triggered by Agricultural Irrigation in Northwestern China
Published 2020-01-01“…Near the slope, the hydraulic gradient of the concave slope was steeper than the convex slope. …”
Get full text
Article -
1366
A Novel Model for Predicting the Well Production in High-Sulfur-Content Gas Reservoirs
Published 2021-01-01“…After that, the influence of sulfur deposition on the production of fractured horizontal wells was revealed through theoretical calculations, and the effects of hydraulic fracture parameters on production were analyzed. …”
Get full text
Article -
1367
Porous Multiphase Microcharacteristics Research of New Cement-Based Grouting Material Concretion
Published 2021-01-01“…As an excellent inorganic hydraulic cementitious material, new cement-based grouting material (abbreviated as NCG) has a wide application prospect in grouting engineering. …”
Get full text
Article -
1368
-
1369
Analysis on the Difference of Impact Response between Single Coal-Rock Particle and the Box Structure-Based Tail Beam
Published 2021-01-01“…In the process of coal caving, the basis of identifying coal and rock by the vibration signal is the difference of the tail beam response when coal-rock impacts the tail beam, and the tail beam in the hydraulic support is a complex box structure with multiplate transverse and longitudinal welding, and the response difference of the box structure-based tail beam under the impact of coal-rock is not clear. …”
Get full text
Article -
1370
ASTEC–MAAP Comparison of a 2 Inch Cold Leg LOCA until RPV Failure
Published 2018-01-01“…The two codes predict similar primary system depressurization behaviour until the accumulation injection, confirming similar break flow and primary system thermal-hydraulic response calculations between the two codes. …”
Get full text
Article -
1371
Study on the influence of working condition variation on lubrication characteristics of EHA internal pump
Published 2025-01-01“…Abstract The operational characteristics of Electro-Hydraulic Actuator(EHA) result in the EHA internal pump facing complex conditions of variable speed, pressure and even direction, resulting in poor lubrication state of friction pairs. …”
Get full text
Article -
1372
Methane Extraction and Resource Utilization Based on Multisource Data Fusion
Published 2022-01-01Get full text
Article -
1373
The Spatiotemporal Variations of Runoff in the Yangtze River Basin under Climate Change
Published 2018-01-01Get full text
Article -
1374
Multiscale Fracturing in Medium- to Low-Rank Coals and Its Implications on Coalbed Methane Production in the Baode Area, Eastern Ordos Basin, China
Published 2022-01-01“…Some of the fractures are filled with carbonate and clay minerals and are beneficial for methane migration, caused by hydraulic fracturing. The average mercury withdrawal efficiency of the coals was 75%. …”
Get full text
Article -
1375
Waste Foundry Sand as Permeable and Low Permeable Barrier for Restriction of the Propagation of Lead and Nickel Ions in Groundwater
Published 2020-01-01“…Measurements signified that the hydraulic conductivity of WFS was 3.8 × 10−7 cm/s which satisfies the requirements of LPB. …”
Get full text
Article -
1376
An Experimental Study on the Basic Mechanical Properties and Compression Size Effect of Rubber Concrete with Different Substitution Rates
Published 2020-01-01“…An experimental study was carried out on the uniaxial compression, uniaxial splitting, pure shear, and compression size effect of rubber concrete with 5 different substitution rates by applying hydraulic servo and direct shear apparatus. Then, by comparing the failure modes and ultimate strength eigenvalues of rubber concrete under different loading conditions, the following conclusions were drawn: with the increase of rubber substitution rate, the concrete specimens maintain a relatively good integrity under uniaxial compressive failure; on the contrary, the failure sections under uniaxial slitting and pure shear gradually become uneven with an increasing amount of fallen rubber particles. …”
Get full text
Article -
1377
Investigations on Free Span Rectification for a Submarine Pipeline on Sand Wave Seabeds
Published 2025-01-01Get full text
Article -
1378
Analysis of geological characteristics and potential factors of formation damage in coalbed methane reservoir in Northern Qinshui basin
Published 2025-01-01“…The fine particles generated from hydraulic fracturing are prone to transport through the coal seam while obstructing pore throats. …”
Get full text
Article -
1379
-
1380
DEVELOPMENT AND ADAPTATION OF VORTEX REALIZABLE MEASUREMENT SYSTEM FOR BENCHMARK TEST WITH LARGE SCALE MODEL OF NUCLEAR REACTOR
Published 2017-09-01“…The last decades development of applied calculation methods of nuclear reactor thermal and hydraulic processes are marked by the rapid growth of the High Performance Computing (HPC), which contribute to the active introduction of Computational Fluid Dynamics (CFD). …”
Get full text
Article