Leaching Kinetics of Ironmaking Blast Furnace Slag as a Source of Calcium for CO<sub>2</sub> Sequestration
An ironmaking blast furnace slag was prepared and dissolved in lixiviant solutions of known concentrations for the leaching of calcium. A portable laboratory orbital shaking incubator was used for the leaching experiments. In addition, XRF and AAS were utilised for the sample characterization of sol...
Saved in:
| Main Authors: | , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
MDPI AG
2024-05-01
|
| Series: | Proceedings |
| Subjects: | |
| Online Access: | https://www.mdpi.com/2504-3900/105/1/140 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | An ironmaking blast furnace slag was prepared and dissolved in lixiviant solutions of known concentrations for the leaching of calcium. A portable laboratory orbital shaking incubator was used for the leaching experiments. In addition, XRF and AAS were utilised for the sample characterization of solid residues and leach liquor, respectively. This study demonstrated that increasing the concentration of the solvent enhances the efficiency of calcium extraction; however, it also causes the leaching of other elements, such as magnesium, which can impede the carbonation stage. The research also revealed that the extraction of calcium from the largest particles is constrained by mass transfer and the accessibility of calcium from the particle. The authors hypothesize that the reaction products build up and hinder the reaction on the surface layer of the particles. However, with the smallest particle size fraction, more calcium can be extracted before the surface is obstructed, thus ensuring maximum extraction efficiency. Based on the activation energy value of 70.51 kJ/mol, it is less likely that the leaching of blast furnace slag in ammonium nitrate is a product-layer-diffusion-controlled process, as the activation energy for this type of process is usually below 20 kJ/mol. Instead, the higher activation energy suggests that the leaching process may be controlled by surface chemical reactions or a mixed mechanism. However, more detailed analysis and experimental data would be required to confirm the reaction mechanism. |
|---|---|
| ISSN: | 2504-3900 |