Influence of the Type of Load on Characteristics of a Dedicated USB PD Charging System—A Case Study
This paper presents the results of an experimental study on the charging process of selected mobile device batteries using a dedicated charging system operating in the Universal Serial Bus Power Delivery (USB PD) mode. The charging circuit was developed in the Flyback topology using a power factor c...
Saved in:
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
MDPI AG
2025-05-01
|
| Series: | Applied Sciences |
| Subjects: | |
| Online Access: | https://www.mdpi.com/2076-3417/15/10/5254 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | This paper presents the results of an experimental study on the charging process of selected mobile device batteries using a dedicated charging system operating in the Universal Serial Bus Power Delivery (USB PD) mode. The charging circuit was developed in the Flyback topology using a power factor correction (PFC) circuit. A block diagram of the charging system under consideration and a block diagram of the measurement set-up are presented. Power resistors with different resistance values and two selected mobile devices with different built-in battery capacitances were used as the load of the charging system under test. The test results are presented as a function of load resistance and the State of Charge (SoC) level of the batteries used. The measurement results obtained are discussed. |
|---|---|
| ISSN: | 2076-3417 |