Dynamic Modeling and Experimental Validation of Shock Isolation Performance for Shipborne Stewart-Platform-Based Bumper
The Stewart-platform-based bumper plays a critical role in shipborne strap-down inertial navigation systems (SINSs), effectively mitigating shock-induced disturbances to ensure measurement accuracy. Dynamic modeling for the bumper under a huge impact is a key issue in predicting the shock isolation...
Saved in:
| Main Authors: | , , , , , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
MDPI AG
2025-05-01
|
| Series: | Journal of Marine Science and Engineering |
| Subjects: | |
| Online Access: | https://www.mdpi.com/2077-1312/13/6/1007 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | The Stewart-platform-based bumper plays a critical role in shipborne strap-down inertial navigation systems (SINSs), effectively mitigating shock-induced disturbances to ensure measurement accuracy. Dynamic modeling for the bumper under a huge impact is a key issue in predicting the shock isolation performance of the bumper. In this paper, the dynamic modeling of shock isolation performance for Stewart-platform-based bumpers under huge impacts is proposed and validated experimentally. Firstly, a model of a Stewart-platform-based bumper is established considering the geometric configuration and dynamic parameters of the bumper by calculating the Jacobian matrix, stiffness matrix, damping matrix and mass matrix. Secondly, an analytic simulation of the impact is presented based on the measured impact acceleration, and the impact force on the load is derived according to the non-displacement assumption in the impact stage. Then, the Lagrangian formulation was systematically applied to establish governing equations characterizing the six-degree-of-freedom (DOF) dynamics of the bumper, incorporating both inertial coupling effects and nonlinear shock energy dissipation mechanisms. Afterwards, dynamic equations were solved via the Runge–Kutta method to obtain the theoretical results. Finally, the proposed dynamic modeling and shock isolation performance analysis method was validated via impact experiments for the bumper. |
|---|---|
| ISSN: | 2077-1312 |