Signal-to-Noise Ratio Model and Imaging Performance Analysis of Photonic Integrated Interferometric System for Remote Sensing
Photonic integrated interferometric imaging systems (PIISs) provide a compact solution for high-resolution Earth observation missions with stringent size, weight, and power (SWaP) constraints. As an indirect imaging method, a PIIS exhibits fundamentally different noise response characteristics compa...
Saved in:
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
MDPI AG
2025-04-01
|
| Series: | Remote Sensing |
| Subjects: | |
| Online Access: | https://www.mdpi.com/2072-4292/17/9/1484 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Photonic integrated interferometric imaging systems (PIISs) provide a compact solution for high-resolution Earth observation missions with stringent size, weight, and power (SWaP) constraints. As an indirect imaging method, a PIIS exhibits fundamentally different noise response characteristics compared to conventional remote sensing systems, and its imaging performance under practical operational scenarios has not been thoroughly investigated. The primary objective of this paper is to evaluate the operational capabilities of PIISs under remote sensing conditions. We (1) establish a signal-to-noise-ratio model for PIISs with balanced four-quadrature detection, (2) analyze the impacts of intensity noise and turbulent phase noise based on radiative transfer and turbulence models, and (3) simulate imaging performance with WorldView-3-like parameters. The results of the visibility signal-to-noise ratio (SNR) analysis demonstrate that the system’s minimum detectable fringe visibility is inversely proportional to the reciprocal of the sub-aperture intensity signal-to-noise ratio. When the integration time reaches 100 ms, the minimum detectable fringe visibility ranges between <inline-formula><math xmlns="http://www.w3.org/1998/Math/MathML" display="inline"><semantics><msup><mn>10</mn><mrow><mo>−</mo><mn>2</mn></mrow></msup></semantics></math></inline-formula> and <inline-formula><math xmlns="http://www.w3.org/1998/Math/MathML" display="inline"><semantics><msup><mn>10</mn><mrow><mo>−</mo><mn>3</mn></mrow></msup></semantics></math></inline-formula> (at 10 dB system efficiency). Imaging simulations demonstrate that recognizable image reconstruction requires integration times exceeding 10 ms for 10 cm baselines, achieving approximately 25 dB PSNR and 0.8 SSIM at 100 ms integration duration. These results may provide references for potential applications of photonic integrated interferometric imaging systems in remote sensing. |
|---|---|
| ISSN: | 2072-4292 |