Research on the Spiral Rolling Gait of High-Voltage Power Line Serpentine Robots Based on Improved Hopf-CPGs Model
The efficiency of helical locomotion in snake-like robots along high-voltage transmission lines is often hindered by low motion efficiency, high joint signal noise, and challenges in traversing obstacles. This study aims to address these issues by proposing a gait generation method that leverages a...
Saved in:
| Main Authors: | , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
MDPI AG
2025-01-01
|
| Series: | Applied Sciences |
| Subjects: | |
| Online Access: | https://www.mdpi.com/2076-3417/15/3/1285 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | The efficiency of helical locomotion in snake-like robots along high-voltage transmission lines is often hindered by low motion efficiency, high joint signal noise, and challenges in traversing obstacles. This study aims to address these issues by proposing a gait generation method that leverages a standardized Central Pattern Generator (CPG). We modify the traditional Hopf-CPG model by incorporating constraint functions and a frequency-tuning mechanism to regulate the oscillator, which allows for the generation of asymmetric waveform signals for deflection joints and facilitates rapid convergence. The method begins by determining initial and obstacle-crossing state parameters, such as deflection angles and helical radii of the snake-like robot, using the backbone curve method and the Frenet–Serret framework. Subsequently, a CPG neural network is constructed based on Hopf oscillators, with a limit cycle convergent speed adjustment factor and amplitude bias signals to establish a fully connected matrix model for calculating multi-joint output signals. Simulation analysis using Simulink–CoppeliaSim evaluates the robot’s obstacle-crossing ability and the optimization of deflection joint signal noise. The results indicate a 55.70% increase in the robot’s average speed during cable traversal, a 57.53% reduction in deflection joint noise disturbance, and successful crossing of the vibration damper. This gait generation method significantly enhances locomotion efficiency and noise suppression in snake-like robots, offering substantial advantages over traditional approaches. |
|---|---|
| ISSN: | 2076-3417 |