少齿差行星减速器动力学仿真分析
The structure and the rotation principle of reducer with small tooth differences are introduced,then the speed andmeshingforce are calculated theoretically.The kinematics of reducer with small tooth difference is simulated by ADAMS software,the results show that the speed of the duplexgear and outpu...
Saved in:
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | zho |
| Published: |
Editorial Office of Journal of Mechanical Transmission
2013-01-01
|
| Series: | Jixie chuandong |
| Online Access: | http://www.jxcd.net.cn/thesisDetails#10.16578/j.issn.1004.2539.2013.11.030 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | The structure and the rotation principle of reducer with small tooth differences are introduced,then the speed andmeshingforce are calculated theoretically.The kinematics of reducer with small tooth difference is simulated by ADAMS software,the results show that the speed of the duplexgear and output gear of reducer and the transmission ratio is consistent with the theoretical calculation analysis results,which verifies the validity of the model.The dynamic contact simulation analysis of reducer is carried out by ABAQUS software,the results show that the error of meshing force between simulation resultsand the oretical calculation is less than 7%.The influence of different load on the tooth contact force and contact area in the dynamic engagement process is further analyzed.Meanwhile,the gear tooth actual contacttooth and load distribution are simulated at the rated load,the basis for the reducer dynamics analysis and engineering application is provided. |
|---|---|
| ISSN: | 1004-2539 |