CLEAVING MODELING OF CONCRETE IN THE ZONE ANCHORING FREE OF TENSION FITTING
The article presents the results of computer simulation of prototypes designed to test pull-out reinforcement of concrete. Analyzes the state of stress of concrete in the anchorage zone and identifies areas likely splitting the formation of cracks in elastic deformations of the materials. The calcul...
Saved in:
| Main Author: | Yu. V. Krasnoshchekov |
|---|---|
| Format: | Article |
| Language: | Russian |
| Published: |
Siberian State Automobile and Highway University
2017-08-01
|
| Series: | Вестник СибАДИ |
| Subjects: | |
| Online Access: | https://vestnik.sibadi.org/jour/article/view/49 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Similar Items
-
Experimental Investigation of the Behaviour of Short-Span FRP-Reinforced Glulam Beams with Hoops and Tension Anchoring
by: Herry Chen, et al.
Published: (2025-06-01) -
Lateral Performance of Steel–Concrete Anchors Embedded in RC Columns Subjected to Fire Scenario
by: Amer Alkloub, et al.
Published: (2025-07-01) -
Flexural Strengthening of Reinforced Concrete Beams with Substandard Tension Lap Splices Using a Novel Pre-stressing Technique
by: Roba Osman, et al.
Published: (2025-06-01) -
Debonding Behavior of Conventional Concrete Strengthened with Anchored FRP and Staked
by: Rona Ariyansyah, et al.
Published: (2019-10-01) -
Seismic Retrofit Case Study of Shear-Critical RC Moment Frame T-Beams Strengthened with Full-Wrap FRP Anchored Strips in a High-Rise Building in Los Angeles
by: Susana Anacleto-Lupianez, et al.
Published: (2024-09-01)