Energy Efficiency Improvement of Hydraulic Indirect Elevator

This article addresses the current issue of energy consumption in the hydraulic drive systems of working machines, with particular emphasis on elevators. This paper describes the results of experimental comparative research and estimation of energy and time consumption for two drive systems of a hyd...

Full description

Saved in:
Bibliographic Details
Main Authors: Łukasz Stawiński, Andrzej Kosucki, Justyna Skowrońska, Piotr Malenta
Format: Article
Language:English
Published: MDPI AG 2025-04-01
Series:Energies
Subjects:
Online Access:https://www.mdpi.com/1996-1073/18/9/2163
Tags: Add Tag
No Tags, Be the first to tag this record!
_version_ 1850278525221732352
author Łukasz Stawiński
Andrzej Kosucki
Justyna Skowrońska
Piotr Malenta
author_facet Łukasz Stawiński
Andrzej Kosucki
Justyna Skowrońska
Piotr Malenta
author_sort Łukasz Stawiński
collection DOAJ
description This article addresses the current issue of energy consumption in the hydraulic drive systems of working machines, with particular emphasis on elevators. This paper describes the results of experimental comparative research and estimation of energy and time consumption for two drive systems of a hydraulic indirect elevator. The purpose of this article is to compare the energy consumption of a typical multi-valve system (MV) system with that of an innovative new electro-hydraulic drive (EHD) system with a variable speed pump. The EHD system uses a frequency converter with an energy recovery module to control the speed of the car in both directions and the return of potential energy during the lowering cycle. The comparison of these drive systems was performed under the same conditions, realizing the same elevator work cycles. This paper proposes methods for estimating the energy consumption of an MV system based on measurement data collected during an experiment. The results indicate that the EHD system was less energy-intensive, even at below 60%. The smaller the load mass, the shorter the operating time of the EHD system compared to the MV system. The introduced coefficients defining the energy consumption per unit of mass and payload displacement showed more than twice the decrease in energy demand during lifting and energy recovery possibility during lowering. The EHD system provides the same coefficient values regardless of the distance traveled, which makes it a predictable system, in contrast to the MV system, especially during lowering cycles. The benefits of the EHD also include a less complex hydraulic system (elimination of most valves).
format Article
id doaj-art-de49e5f5cdad4b789d56dec220c3970c
institution OA Journals
issn 1996-1073
language English
publishDate 2025-04-01
publisher MDPI AG
record_format Article
series Energies
spelling doaj-art-de49e5f5cdad4b789d56dec220c3970c2025-08-20T01:49:28ZengMDPI AGEnergies1996-10732025-04-01189216310.3390/en18092163Energy Efficiency Improvement of Hydraulic Indirect ElevatorŁukasz Stawiński0Andrzej Kosucki1Justyna Skowrońska2Piotr Malenta3Institute of Machine Tools and Production Engineering, Faculty of Mechanical Engineering, Lodz University of Technology, Stefanowskiego 1/15, 90-924 Lodz, PolandInstitute of Machine Tools and Production Engineering, Faculty of Mechanical Engineering, Lodz University of Technology, Stefanowskiego 1/15, 90-924 Lodz, PolandInstitute of Machine Tools and Production Engineering, Faculty of Mechanical Engineering, Lodz University of Technology, Stefanowskiego 1/15, 90-924 Lodz, PolandInstitute of Machine Tools and Production Engineering, Faculty of Mechanical Engineering, Lodz University of Technology, Stefanowskiego 1/15, 90-924 Lodz, PolandThis article addresses the current issue of energy consumption in the hydraulic drive systems of working machines, with particular emphasis on elevators. This paper describes the results of experimental comparative research and estimation of energy and time consumption for two drive systems of a hydraulic indirect elevator. The purpose of this article is to compare the energy consumption of a typical multi-valve system (MV) system with that of an innovative new electro-hydraulic drive (EHD) system with a variable speed pump. The EHD system uses a frequency converter with an energy recovery module to control the speed of the car in both directions and the return of potential energy during the lowering cycle. The comparison of these drive systems was performed under the same conditions, realizing the same elevator work cycles. This paper proposes methods for estimating the energy consumption of an MV system based on measurement data collected during an experiment. The results indicate that the EHD system was less energy-intensive, even at below 60%. The smaller the load mass, the shorter the operating time of the EHD system compared to the MV system. The introduced coefficients defining the energy consumption per unit of mass and payload displacement showed more than twice the decrease in energy demand during lifting and energy recovery possibility during lowering. The EHD system provides the same coefficient values regardless of the distance traveled, which makes it a predictable system, in contrast to the MV system, especially during lowering cycles. The benefits of the EHD also include a less complex hydraulic system (elimination of most valves).https://www.mdpi.com/1996-1073/18/9/2163elevatorsenergy consumptionvariable speed pumpelectro-hydraulic drives
spellingShingle Łukasz Stawiński
Andrzej Kosucki
Justyna Skowrońska
Piotr Malenta
Energy Efficiency Improvement of Hydraulic Indirect Elevator
Energies
elevators
energy consumption
variable speed pump
electro-hydraulic drives
title Energy Efficiency Improvement of Hydraulic Indirect Elevator
title_full Energy Efficiency Improvement of Hydraulic Indirect Elevator
title_fullStr Energy Efficiency Improvement of Hydraulic Indirect Elevator
title_full_unstemmed Energy Efficiency Improvement of Hydraulic Indirect Elevator
title_short Energy Efficiency Improvement of Hydraulic Indirect Elevator
title_sort energy efficiency improvement of hydraulic indirect elevator
topic elevators
energy consumption
variable speed pump
electro-hydraulic drives
url https://www.mdpi.com/1996-1073/18/9/2163
work_keys_str_mv AT łukaszstawinski energyefficiencyimprovementofhydraulicindirectelevator
AT andrzejkosucki energyefficiencyimprovementofhydraulicindirectelevator
AT justynaskowronska energyefficiencyimprovementofhydraulicindirectelevator
AT piotrmalenta energyefficiencyimprovementofhydraulicindirectelevator