Preparation and Characterization of (Au/n-SnO2/SiO2/Si/Al) MIS Device for Optoelectronic Application
SnO2 thin films were prepared by using rapid thermal oxidation (RTO) of Sn at oxidation temperature 873 K and oxidation time 90 sec on semiconductor n-type and p-type silicon substrate. In order to characterize the prepared device, the electrical properties have been measured which revealed that the...
Saved in:
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Wiley
2013-01-01
|
| Series: | International Journal of Optics |
| Online Access: | http://dx.doi.org/10.1155/2013/756402 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | SnO2 thin films were prepared by using rapid thermal oxidation (RTO) of Sn at oxidation temperature 873 K and oxidation time 90 sec on semiconductor n-type and p-type silicon substrate. In order to characterize the prepared device, the electrical properties have been measured which revealed that the barrier height is greatly depended on interfacial layer thickness (SiO2). The value of peak response (n-SnO2/SiO2/n-Si) device was 0.16 A/W which is greater than that of (n-SnO2/SiO2/p-Si) device whose value was 0.12 A/W, while the rise time was found to be shorter. |
|---|---|
| ISSN: | 1687-9384 1687-9392 |