Effect of high MgO/Al2O3ratio (1.2 to 2.2) on sintering behavior and metallurgical properties
The sintering pot test was used to investigate the effect of MgO/Al2O3 ratio in the range of 1.2 to 2.2 on the sintering behavior of iron ore. The main characterization methods of X-ray diffraction (XRD) and scanning electron microscopyenergy disperse spectroscopy (SEM-EDS) were employed. The result...
Saved in:
| Main Authors: | Ju J.-T., Tang C.-M., Pang Z.-G., Xing X. -D., Ji G.-H. |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
University of Belgrade, Technical Faculty, Bor
2021-01-01
|
| Series: | Journal of Mining and Metallurgy. Section B: Metallurgy |
| Subjects: | |
| Online Access: | http://www.doiserbia.nb.rs/img/doi/1450-5339/2021/1450-53392000034J.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Similar Items
-
Microstructure and dielectric properties of low-temperature sintered MgO-based ceramics at millimeter wave and terahertz frequencies
by: Haotian Liu, et al.
Published: (2024-10-01) -
Improving the sintering performance of specularite bearing mixtures by separated pre-agglomeration-sintering processes
by: ZHU De-qing, et al.
Published: (2015-08-01) -
Synthesis and characterization of MgO-ZrO2 mixed oxides prepared by the sol–gel method
by: José Armando Olmos López, et al.
Published: (2025-05-01) -
Hydrophilic Direct Bonding of MgO/MgO for High-Temperature MEMS Devices
by: Jia Liu, et al.
Published: (2020-01-01) -
Structural, Optical, and Electrical Investigations of MgO Nanostructure Under the Pressure Effect
by: Y. Al‐Douri, et al.
Published: (2025-05-01)