Determining friction properties of ABS plastic in contact with loamy soil

Determining friction properties of ABS plastic in contact with loamy soil

The paper explores the feasibility of substituting steel working bodies with polymer ones in soil-cultivating units. (Research purpose) The research aims to investigate how the friction parameters of acrylonitrile butadiene styrene (ABS plastic) are affected by variations in absolute soil moisture a...

Full description

Saved in:

Bibliographic Details
Main Authors:	S. A. Kvas, A. S. Zolotarev
Format:	Article
Language:	Russian
Published:	Federal Scientific Agroengineering Centre VIM 2024-06-01
Series:	Сельскохозяйственные машины и технологии
Subjects:	tillage unit working body acrylonitrile butadiene styrene (abs plastic) loamy soil humidity moisture technological properties sliding friction coefficient adhesion
Online Access:	https://www.vimsmit.com/jour/article/view/587
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Study on Compression and Flexural Behavior of ABS-SiO2 Poly-mer Matrix Composite Fabricated by Hot Extrusion
by: Yasser Rostamiyan, et al.
Published: (2019-11-01)

Fatigue Test of Plastics and Manufacturing Collet Nut Driver for Integrated Rotating Bending Fatigue Test Machine
by: Tri Setyo Aji Cahyono, et al.
Published: (2024-11-01)

Studying the Influence of the Mixing Speed of the Polymer Blend of General-Purpose Polystyrene and Acrylonitrile-Butadiene Styrene with the Applications of Artificial Neural Networks
by: A. Mehralizadeh, et al.
Published: (2020-10-01)

The Quality of Strengthening Impregnation of 3D-Printed Parts for Agricultural Machinery
by: R. Ya. Kazberov, et al.
Published: (2022-10-01)

Experimental Study on Dynamic Behavior of Acrylonitrile-Butadiene-Styrene (ABS) Based Nano Composite Reinforced by Nano Silica Addition
by: A. Rahmani, et al.
Published: (2020-11-01)

Neural Network Optimization of Mechanical Properties of ABS-like Photopolymer Utilizing Stereolithography (SLA) 3D Printing
by: Abdulkader Ali Abdulkader Kadauw
Published: (2025-04-01)

Screening of metal additives in ABS polymer fuel for enhanced performance in hybrid rocket motors: A computational analysis using CEA
by: Gail Ndlovu, et al.
Published: (2025-08-01)

Influence of infill density and number of layers on mechanical properties of 3D printed pla and abs sandwich structures
by: Mirko Karakašić, et al.
Published: (2024-12-01)

Effect of polymer modification on bitumen rheology: A comparative study of bitumens obtained from different sources
by: Özdemir Ahmet Münir, et al.
Published: (2025-07-01)

Adhesion compositions with constant tackiness based on butadiene-acrylonitrile rubber.
by: S. V. Stroilov, et al.
Published: (2009-04-01)

Performance modelling and optimization of disc angle and tractor speed for a disc ridger in loamy soil using RSM
by: David Amidu Wandusim, et al.
Published: (2025-06-01)

The Analysis of 3D Printing Thermoplastic Materials by Using FDM Technique
by: Shoukat Ali noonari, et al.
Published: (2025-06-01)

The Analysis of 3D Printing Thermoplastic Materials by Using FDM Technique
by: Shoukat Ali noonari, et al.
Published: (2025-06-01)

Mechanical property study of 3D printed honeycomb structures with carbon fiber reinforcement: a finite element analysis and experimental approach
by: J. Jerold John Britto, et al.
Published: (2025-06-01)

Emission Characteristics of Volatile Organic Compounds from Material Extrusion Printers Using Acrylonitrile–Butadiene–Styrene and Polylactic Acid Filaments in Printing Environments and Their Toxicological Concerns
by: Yuan Gao, et al.
Published: (2025-04-01)

Effect of Curvature Shape on the Impact Strength of Additively Manufactured Acrylonitrile Butadiene Styrene Parts Produced via Fused Deposition Modeling
by: Muhammad Fahad, et al.
Published: (2024-12-01)

Rubber curing chemistry governing the orientation of layered silicate
Published: (2007-11-01)

Parametric optimization and sensitivity analysis of the integrated Taguchi-CRITIC-EDAS method to enhance the surface quality and tensile test behavior of 3D printed PLA and ABS parts
by: Mst. Nazma Sultana, et al.
Published: (2025-01-01)

The influence of processing additives on the processability and properties of styrene-butadiene rubber
by: D. V. Sitnikova, et al.
Published: (2011-10-01)

Improvement of a pendulum‐type apparatus for friction test of a contact lens to simulate the conditions of its actual usage
by: Ryusuke Nakaoka, et al.
Published: (2024-11-01)

Investigating compatibilization of polyoxymethylene/styrene-butadiene-styrene immiscible blend through addition of hydroxylated graphene
by: Seyed Alireza Sadri, et al.
Published: (2024-10-01)

Reduction of friction by normal oscillations. I. Influence of contact stiffness
by: M. Popov, et al.
Published: (2017-03-01)

QUANTIFICATION OF FRICTION IN THE FRETTING PHENOMENON
by: Stefan GHIMIŞI
Published: (2021-12-01)

THE COEFFICIENT OF FRICȚION IN THE FRETTING PHENOMENON
by: Stefan GHIMIŞI
Published: (2016-05-01)

Effect of Parameters on the Runoff Erosion Control Performance of Structurally Modified Jute and Coir Geomeshes over Loamy Sand
by: Sushma Verma, et al.
Published: (2021-03-01)

Enhancing the Strength and Durability Behaviour of Concrete Produced with Brown-Loamy Kaolin Clay Polymer
by: Patrick Zievie, et al.
Published: (2024-06-01)

Combined effect of surface microgeometry and adhesion in normal and sliding contacts of elastic bodies
by: Irina Goryacheva, et al.
Published: (2017-09-01)

The effect of stearic acid on surface properties of elastomeric compositions based on butadienestyrene rubber
by: O. A. Dulina, et al.
Published: (2014-06-01)

Evaluation on the interface characteristics, mechanism and performance of the dry modified SBS asphalt mixtures by multiscale methods
by: Zijun Zhang, et al.
Published: (2025-04-01)

Microscopic Interactions Between Different Block Ratios of Styrene–Butadiene–Styrene and Asphalt During Their Miscibility
by: Jinyang Deng, et al.
Published: (2024-12-01)

Evaluating the dynamic response and phase angle behavior of SBS-modified asphalt mixtures for enhanced pavement performance
by: Inamullah Khan, et al.
Published: (2024-11-01)

Effects of Additive Materials on Indirect Tensile Strength and Moisture Sensitivity of Recycled Asphalt Pavement (RAP)
by: Soz Mohammed Ebrahim, et al.
Published: (2019-10-01)

Active control of friction by transverse oscillations
by: J. Benad, et al.
Published: (2018-03-01)

Novel blends of acrylonitrile butadiene rubber and polyurethane-silica hybrid networks
by: X. P. Wang, et al.
Published: (2012-07-01)

A numerical model to simulate the transient frictional viscoelastic sliding contact
by: Dongze Wang, et al.
Published: (2023-11-01)

Performance characterization and combination design optimization of fast-melting SBS/CR modified asphalt
by: Jinyao Li, et al.
Published: (2024-12-01)

Physical and chemical properties of bentonite and its influence on acid and alkaline indicators and fertility of sod-podsolic sandy loamy soil (Retisols)
by: A. V. Kozlov, et al.
Published: (2019-03-01)

Study of the Sliding Friction Coefficient of Different-Size Elements in Discrete Element Method Based on an Experimental Method
by: Pengcheng Liu, et al.
Published: (2024-09-01)

Experimental validation of elliptical contact tire model with friction coefficient deduced from viscoelasticity of tread rubber
by: Ryota NAKANISHI, et al.
Published: (2024-10-01)

Rheological properties and 3D printability of SBS/CR-modified asphalt binder with C9 petroleum resin for crack filling
by: Yanhui Niu, et al.
Published: (2024-12-01)