Ray tracing design-optimization & experimental validation of water based optical filter to reduce solar PV module heating
The operating temperature of a photovoltaic (PV) module significantly impacts its efficiency. Increased temperatures reduce the efficiency due to a negative thermal coefficient, which decreases its power above standard test conditions (25 °C, 1000 W/m2). This research targets the reduction of therma...
Saved in:
| Main Authors: | , , , , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Elsevier
2024-11-01
|
| Series: | Case Studies in Thermal Engineering |
| Subjects: | |
| Online Access: | http://www.sciencedirect.com/science/article/pii/S2214157X24013029 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | The operating temperature of a photovoltaic (PV) module significantly impacts its efficiency. Increased temperatures reduce the efficiency due to a negative thermal coefficient, which decreases its power above standard test conditions (25 °C, 1000 W/m2). This research targets the reduction of thermal load on PV modules through the incorporation of a water-based optical filter, designed and optimized using ray tracing techniques. The optimal thickness for the glass was determined as 3 mm and 5 mm for the water layers of the filter, providing the best yield. The filter effectively absorbs 92 % of the infrared radiation and 47 % of the ultraviolet spectral flux, significantly reducing heat-induced efficiency losses in the PV module. Water-based optical filter system reduces the module temperature up to 9.80 °C. The optical filter-based PV system achieved a 4.56 % increase in electrical efficiency compared to the reference module, with an average efficiency of 12.19 %. The heated water, reaching up to 48.25 °C, can be reused for various industrial processes, providing both cooling for PV modules and a hot water source, making it versatile and efficient for regions needing both electricity and hot water. |
|---|---|
| ISSN: | 2214-157X |