THE CORRELATION BETWEEN ULTIMATE STRAIN ROLLED STEEL IN DRAWING WITH THE PARAMETERS OF MICROSTRUCTURE

THE CORRELATION BETWEEN ULTIMATE STRAIN ROLLED STEEL IN DRAWING WITH THE PARAMETERS OF MICROSTRUCTURE

The correlation of mechanical hardening to the degree of dispersion of the perlite (interlamellar spacings) and strength indices of rolled steel diameter of 6.5 mm made of steel grade C72D is showed. Using the method of hydrostatic weighing and X-ray analysis it was established that to increase the...

Full description

Saved in:

Bibliographic Details
Main Authors:	E. V. Parusov, S. I. Gubenko, V. A. Lutsenko, A. B. Sychkov, A. V. Vedeneev
Format:	Article
Language:	English
Published:	Belarusian National Technical University 2016-12-01
Series:	Литьë и металлургия
Subjects:	high-carbon steel mechanical hardening dispersion of the perlite mechanical properties coil rolled steel
Online Access:	https://lim.bntu.by/jour/article/view/1460
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Control of plasticity of high‑strength condition of cold‑formed pearlitic steel
by: V. P. Fetisov
Published: (2024-04-01)

Ceramic rolls for rolling of steel foils
by: Vyacheslav Goryany, et al.
Published: (2023-03-01)

Influence of the grain size of rolled sparingly alloyed steel on the quality of manufacture of gears
by: S. P. Rudenko, et al.
Published: (2025-01-01)

A Study of Correlations between Chemical Composition, Hot Rolling Process Pa rameters, Microstructure and Mechanical Properties of Hot Rolled DP600 Steel
by: T. Kaźmierski, et al.
Published: (2025-06-01)

Microstructures and mechanical properties of novel 2.3 GPa secondary hardening steels with different Ni contents
by: Wenhong Peng, et al.
Published: (2025-03-01)

Structure and characteristics of boron-containing steels for fasteners
by: H. P. Haretski, et al.
Published: (2020-04-01)

Mechanical performance improvement for various 9Cr ODS alloys at room temperature and 650 °C by tailoring hot rolling and subsequent heat treatments
by: Ruhao Sun, et al.
Published: (2025-07-01)

Study on microstructure characteristics and hole expansion mechanism of Ti–Nb–V microalloyed 900 MPa hot-rolled ferrite-bainite high hole expansion steel
by: Zhengtuan Li, et al.
Published: (2024-11-01)

Mechanical adhesion energy of thermal oxide scale on 0.01 and 0.12 wt.% Si-containing hot-rolled steels
by: Issaard Wannapha, et al.
Published: (2025-01-01)

EFFECT OF PRECIPITATION HARDENING ON MICROSTRUCTURE OF 17-7 PH STEEL WITH MODIFIED CHEMICAL COMPOSITION
by: Belma Fakić, et al.
Published: (2024-06-01)

Effect of Intermediate Annealing Before Cold Rolling on Microstructure and Mechanical Properties of Medium Manganese Steel and Mechanism of Phase Transformation Plasticity
by: Shun Yao, et al.
Published: (2025-04-01)

Effect of laser hardening on the mechanical, tribological and corrosion properties of low alloy steels
by: Albahlol O.A.A., et al.
Published: (2023-01-01)

The impact of hot roll temperature on the microstructure and corrosion resistance of super duplex stainless steel, which is used to coat mild steel in seawater environments
by: Naffat L., et al.
Published: (2025-01-01)

The effect of high-temperature intercritical annealing and rolling strain on the development of trimodal microstructure in low-carbon steel
by: Somayyeh Gholamalipour, et al.
Published: (2025-01-01)

Investigation on processing for a titanium-microalloyed hot rolled dual phase steel
by: YI Hai-long, et al.
Published: (2015-05-01)

INSIGHTS INTO FACTORS OF DAMAGE OF SURFACE ROLLING OF RAILWAY WHEELS DURING OPERATION
by: Hangardas ASKEROV, et al.
Published: (2019-12-01)

Formation of plastic properties during deformation stretching of pearlitic steel
by: V. P. Fetisov
Published: (2023-08-01)

Selection of the optimal version of the rolling rings of stand no. 7 of mill 150 of OJSC “BSW Management Company of Holding “BMC” from various types of high-speed steel, providing the best indicator of operational durability
by: I. A. Guzova, et al.
Published: (2020-01-01)

Improved Microstructure of 316LN Stainless Steel Performed by Ultrasonic Surface Rolling
by: Likun Jiang, et al.
Published: (2025-05-01)

Modeling and simulation of ridge-buckle control in the coiling process of cold rolling strips with local high points
by: GUAN Jian-long, et al.
Published: (2015-08-01)

Influence of quenching temperature from the intercritical interval on the character of X70 steel strain hardening
by: V. G. Gavrylova, et al.
Published: (2016-06-01)

Effects of hot rolling on microstructures, wear and corrosion resistance of Mo-Ni-W p/m alloyed steels
by: Elkilani R.H.R., et al.
Published: (2024-01-01)

Rolling contact fatigue property of gradient rare earth addition M50 bearing steel with surface nano-grains and its inhibited martensite decay
by: B. Gao, et al.
Published: (2024-11-01)

NGBoost algorithm-based prediction of mechanical properties of a hot-rolled strip and its interpretability research with ANOVA values
by: Hongyi Wu, et al.
Published: (2024-11-01)

Analysis of the applicability of steel 20MnCrS5 for gears of the domestic mobile machines
by: S. P. Rudenko, et al.
Published: (2020-04-01)

Effects of Hot rolling Reduction on Microstructural Evolution and Mechanical Properties of 1.25Cr-1Mo-0.5V-0.3C Steel for High-Speed Rail Brake Discs
by: Hyo-Seong Kim, et al.
Published: (2024-04-01)

Analysis of the causes and conditions for the formation of surface defects on hot‑rolled products from peritectic steel grades obtained under the conditions OJSC “BSW – Management Company of the Holding “BMC”
by: A. V. Tereshchenko, et al.
Published: (2021-09-01)

СOMPACT COMPLEX FOR PROCESSING OF LARGE-DIAMETER PIPES INTO THE ROLLING STEEL PRODUCTS
by: A. В. Steblov, et al.
Published: (2016-08-01)

The development and introduction of production technology and heat treatment of seamless hot-rolled tubes from cr-mo steel grades
by: S. N. Аudeev, et al.
Published: (2019-01-01)

Enhancing strength and toughness of 2-GPa-grade press-hardened steel by novel electroshock treatment
by: Ye Li, et al.
Published: (2025-08-01)

Development and Validation of a Large Strain Flow Curve Model for High-Silicon Steel to Predict Roll Forces in Cold Rolling
by: Yong-Hoon Roh, et al.
Published: (2025-03-01)

Formation of precipitates and their effects on the mechanical properties in a Fe–Mn–Al–C austenitic low-density steel
by: Yongxuan Shang, et al.
Published: (2025-05-01)

Effect of Electrolytic-Plasma Hardening on the Microstructure and Tribological Properties of Low-Alloy Steels
by: Bauyrzhan Rakhadilov, et al.
Published: (2025-06-01)

Influence of unevened grains of metal on the mechanical properties of seamless hot – rolled pipes.
by: I. A. Kovaleva, et al.
Published: (2020-04-01)

THE METHOD OF ROLL SURFACE QUALITY MEASUREMENT FOR CONTINUOUS HOT DIP ZINC COATED STEEL SHEET PRODUCTION LINE
by: Ki Yong Choi, et al.
Published: (2015-04-01)

Effect of asymmetric rolling in relief rolls on the microstructure evolution and mechanical properties of aluminum and copper workpieces
by: Sergey Lezhnev, et al.
Published: (2025-06-01)

Surface roughness rolling-transfer regularity and prediction model of high strength steel strips
by: ZHANG Qing-dong, et al.
Published: (2016-01-01)

Investigation of microstructure and mechanical properties of 45KH2NMFBA steel samples after thermal exposure
by: A. Yu. Izobello, et al.
Published: (2024-06-01)

The perspective of application of carburized steels, manufactured according to European standard, for gears of domestic mobile machines
by: S. P. Rudenko, et al.
Published: (2019-10-01)

Tensile cracking behavior of oxide scale in hot-rolled steel
by: WANG Shang, et al.
Published: (2017-10-01)