Keeping Good Sensing Performance of Metal–Dielectric–Metal Waveguides After Coating Treatment
Good sensing performance is observed in metal–dielectric–metal (MDM) waveguides in recent research. However, Ag will be oxidized in air. The oxidization layer makes the sensing performance not as high as before. Plating an SiO<sub>2</sub> film on the surface of the...
Saved in:
| Main Authors: | , , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
IEEE
2017-01-01
|
| Series: | IEEE Photonics Journal |
| Subjects: | |
| Online Access: | https://ieeexplore.ieee.org/document/7898873/ |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Good sensing performance is observed in metal–dielectric–metal (MDM) waveguides in recent research. However, Ag will be oxidized in air. The oxidization layer makes the sensing performance not as high as before. Plating an SiO<sub>2</sub> film on the surface of the Ag waveguide not only can avoid oxidization but can keep good sensing performance through our numerical discussion as well. The decaying rate of electric field <italic>E</italic> at the interface and inside is also defined to illustrate the phenomenon mentioned above. We hope our findings will provide guidance for the integrated plasmonic devices. |
|---|---|
| ISSN: | 1943-0655 |