Photocatalytic Mineralization of Organic Acids over Visible-Light-Driven Au/BiVO4 Photocatalyst

Au/BiVO4 visible-light-driven photocatalysts were synthesized by coprecipitation method in the presence of sodium dodecyl benzene sulfonate (SDBS) as a dispersant. Physical characterization of the obtained materials was carried out by X-ray diffraction (XRD), scanning electron microscopy (SEM), ener...

Full description

Saved in:
Bibliographic Details
Main Authors: Kanlaya Pingmuang, Natda Wetchakun, Wiyong Kangwansupamonkon, Kontad Ounnunkad, Burapat Inceesungvorn, Sukon Phanichphant
Format: Article
Language:English
Published: Wiley 2013-01-01
Series:International Journal of Photoenergy
Online Access:http://dx.doi.org/10.1155/2013/943256
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:Au/BiVO4 visible-light-driven photocatalysts were synthesized by coprecipitation method in the presence of sodium dodecyl benzene sulfonate (SDBS) as a dispersant. Physical characterization of the obtained materials was carried out by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), UV-Vis diffuse reflectance spectroscopy (DRS) and Brunauer, and Emmett and Teller (BET) specific surface area measurement. Photocatalytic performances of the as-prepared Au/BiVO4 have also been evaluated via mineralizations of oxalic acid and malonic acid under visible light irradiation. XRD and SEM results indicated that Au/BiVO4 photocatalysts were of almost spherical particles with scheelite-monoclinic phase. Photocatalytic results showed that all Au/BiVO4 samples exhibited higher oxalic acid mineralization rate than that of pure BiVO4, probably due to a decrease of BiVO4 band gap energy and the presence of surface plasmon absorption upon loading BiVO4 with Au as evidenced from UV-Vis DRS results. The nominal Au loading amount of 0.25 mol% provided the highest pseudo-first-order rate constant of 0.0487 min−1 and 0.0082 min−1 for degradations of oxalic acid (C2) and malonic acid (C3), respectively. By considering structures of the two acids, lower pseudo-first-order rate constantly obtained in the case of malonic acid degradation was likely due to an increased complexity of the degradation mechanism of the longer chain acid.
ISSN:1110-662X
1687-529X