Structural Parameter Optimization of the Vector Bracket in a Vertical Takeoff and Landing Unmanned Aerial Vehicle
The functionality of unmanned aerial vehicles (UAVs) in agricultural applications was improved by optimizing the parameters of the vector bracket in a vertical takeoff and landing UAV to maximize thrust and lift-to-drag ratio. First, the results of computational fluid dynamics simulations were compa...
Saved in:
| Main Authors: | , , , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
MDPI AG
2025-05-01
|
| Series: | Aerospace |
| Subjects: | |
| Online Access: | https://www.mdpi.com/2226-4310/12/6/487 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | The functionality of unmanned aerial vehicles (UAVs) in agricultural applications was improved by optimizing the parameters of the vector bracket in a vertical takeoff and landing UAV to maximize thrust and lift-to-drag ratio. First, the results of computational fluid dynamics simulations were compared with wind tunnel data to ensure an accurate model of the considered UAV, indicating a thrust coefficient error of less than 3% and a UAV lift-to-drag ratio error of less than 8%. Next, this model was applied to simulate the propeller thrust and UAV lift-to-drag ratio for 25 sample points selected using a central composite experimental design by varying the four structural parameters of the vector bracket. A kriging algorithm was subsequently applied to construct response surface models based on the results. Finally, a Multi-Objective Genetic Algorithm was employed to determine the optimal parameter values maximizing the two coefficients. The optimal structural parameters for the UAV vector bracket were determined to comprise a vector bracket height of 51 mm, fixed bracket length of 168 mm, fixed bracket width of 69 mm, and ball socket outer diameter of 31 mm. These values provided a 19% larger propeller thrust coefficient than those of the original UAV. |
|---|---|
| ISSN: | 2226-4310 |