Consideraciones sobre la rotura por fatiga de contacto en el hierro nodular austemplado. // Considerations on the contact fatigue failure in the austempered nodular iron.
<p>El presente trabajo considera como factor importante la variación de la geometría del nódulo de grafito en el cálculo del<br />número de ciclos necesarios durante la formación de un pitting en una fundición nodular austemplada. En este caso se tomó<br />en cuenta la aparición de...
Saved in:
| Main Authors: | , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Instituto Superior Politécnico José Antonio Echeverría - Cujae
2004-09-01
|
| Series: | Ingeniería Mecánica |
| Online Access: | http://www.ingenieriamecanica.cujae.edu.cu/index.php/revistaim/article/view/225 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | <p>El presente trabajo considera como factor importante la variación de la geometría del nódulo de grafito en el cálculo del<br />número de ciclos necesarios durante la formación de un pitting en una fundición nodular austemplada. En este caso se tomó<br />en cuenta la aparición de una energía de deformación alrededor de este y se consideró el material con propiedades<br />homogéneas. Es analizada la influencia de la variación de la carga, los valores de los diámetros de contacto, el tamaño del<br />nódulo de grafito, de la profundidad donde aparece el nódulo en la geometría del nódulo, por ser estos factores importantes<br />en la iniciación y propagación de grietas por fatiga de contacto. Se trabajó con las profundidades donde aparecen las<br />máximas tensiones tangenciales, las cuales se obtuvieron de las expresiones de Hertz, con valores de carga dentro del límite<br />elástico. Luego se modela por elementos finitos el mecanismo de fractura, en el sistema ALGOR 12.06, y se realiza una<br />regresión múltiple en el sistema STATGRAPHICS, obteniendo modelos con buenos coeficientes de regresión y niveles de<br />confianza.</p><p><br />Palabras claves: Fatiga de contacto, factura, grietas, nódulo grafito, FEM.</p><p>_________________________________________________________________________</p><p>Abstract.<br />The present paper deal with the failure of contact fatigue in the autempered ductil iron considering the graphite nodules<br />variation as an important factor in th calculation of the number of cycles nedded for pitting, starting from theoretical<br />considerations, developing a methodology for the calculation. The influence of load variation is analyzed, the values of the<br />contact diameters, the size of graphite nodules, the depth where the nodule appears in the geometry of the nodule, are<br />important factors in the initiation and propagation of contact fatigue cracks. It is considered the depths in wich the maxims<br />tangential tensions appear, which were obtained by Hertz expressions. An analysis by the method of finite elements with a<br />proffesional software was carried out obtaining the best mesh for a convergence analysis and a regression analysis with<br />STATGRAPHICS, in order to obtain numeric models that related the signal parameters.</p><p><br />Key words: Contac Fatigue, Fracture, Cracks, Graphite Nodule, Finite Elements.</p> |
|---|---|
| ISSN: | 1815-5944 |