The influence of lubricating coolant and processing modes on surface roughness during face milling of workpieces made of aluminum alloys
Within the framework of these studies, experimental studies are carried out on the effect of using coolants of various types — synthetic «BIOSIL-S», semi-synthetic «SP3» and water-based «Smalta-4» — on the roughness of the machined surface of an aluminum billet during milling. The roughness of t...
Saved in:
| Main Authors: | , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Omsk State Technical University, Federal State Autonoumos Educational Institution of Higher Education
2022-06-01
|
| Series: | Омский научный вестник |
| Subjects: | |
| Online Access: | https://www.omgtu.ru/general_information/media_omgtu/journal_of_omsk_research_journal/files/arhiv/2022/%E2%84%96%203%20(183)%20(%D0%9E%D0%9D%D0%92)/32-36%20%D0%9A%D0%B8%D1%81%D0%B5%D0%BB%D1%8C%20%D0%90.%20%D0%93.,%20%D0%9C%D0%B0%D0%BA%D0%B0%D1%88%D0%B8%D0%BD%20%D0%94.%20%D0%A1..pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Within the framework of these studies, experimental
studies are carried out on the effect of using coolants of
various types — synthetic «BIOSIL-S», semi-synthetic «SP3» and water-based «Smalta-4» — on the roughness of the
machined surface of an aluminum billet during milling. The
roughness of the machined surface is evaluated by the Ra
parameter using a MarSurf PS1 portable profilometer. As
a result of the research, it is found that coolants affect the
quality of the resulting surface in different ways. The best
surface quality is obtained at a cutting speed of V=283
m/min and a feed of S=0,02 mm/tooth using a BIOSIL-S
coolant, which is due to rational cutting conditions and
the physical properties of the coolant. |
|---|---|
| ISSN: | 1813-8225 2541-7541 |