Effects of Annealing on Hydrogen Storage Performance in TiZrCrMnFeNi High-Entropy Alloy

Effects of Annealing on Hydrogen Storage Performance in TiZrCrMnFeNi High-Entropy Alloy

This study employed annealing heat treatment ranging from 900 to 1300 °C to systematically investigate the effects of annealing temperature on the microstructure and hydrogen storage performance of the equimolar TiZrCrMnFeNi high-entropy alloy. The research indicates that the TiZrCrMnFeNi high-entro...

Full description

Saved in:

Bibliographic Details
Main Authors:	Tengfei Cheng, Jing Huang, Wanggang Fang, Liqing He, Xiangqun Duan, Guotong Zou, Xiao Li, Xinghai Ren
Format:	Article
Language:	English
Published:	MDPI AG 2025-03-01
Series:	Crystals
Subjects:	TiZrCrMnFeNi high-entropy alloy annealing microstructure hydrogen storage performance
Online Access:	https://www.mdpi.com/2073-4352/15/4/297
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Microstructural evolution and mechanical properties of Ti–5Al–3Mo–3Cr–1Zr-0.15Si alloy by annealing treatments
by: Mingbing Li, et al.
Published: (2024-11-01)

Effect of annealing on the wear resistance of CrN/CrTiSiN PVD nitride coatings
by: Mohammadali Sohrabizadeh, et al.
Published: (2025-05-01)

Corrosion Resistance and Wear Properties of CoCrFeNiMn/TiC High-Entropy Alloy-Based Composite Coatings Prepared by Laser Cladding
by: Qiang Zhan, et al.
Published: (2025-05-01)

Effect of environmental factors on the corrosion behavior of CoCrNi and CoCrFeMnNi alloys in 3.5 wt% NaCl solution
by: Ruizhen Xie, et al.
Published: (2025-03-01)

Effect of warm-rolling and annealing on the microstructure and mechanical properties of dual-phase Al0.45CoCrFeNiTi0.25 high-entropy alloy
by: Enhao Wang, et al.
Published: (2024-11-01)

Study on the Microstructure, Mechanical Properties, and Corrosion Behavior of 900 °C-Annealed CoCrFeMnNiSix (X = 0, 0.3, 0.6, 0.9) High-Entropy Alloys
by: Chunxia Jiang, et al.
Published: (2024-10-01)

Effect of load and temperature on the abrasion behavior of the 20CrMnTi alloy steel
by: WU Xiaolong, et al.
Published: (2025-01-01)

Effect of annealing temperatures on the properties of CdZrS nanoparticles prepared by sol-gel synthesis method
by: A.U. Yimamu, et al.
Published: (2024-12-01)

Comparative study of varying Ce and Y additions on characteristics and modification of inclusion in CoCrFeNiMn high-entropy alloy
by: Baoshu Yin, et al.
Published: (2025-05-01)

Substrate orientation influence on nanotwinning in magnetron sputtered CoCrFeMnNi and Ni coatings
by: Anna Jansson, et al.
Published: (2024-10-01)

Optimising Additive Manufacturing of NiTi and NiMnGa Shape Memory Alloys: A Review
by: Ali Ramezannejad, et al.
Published: (2025-04-01)

On some Features of the Grain and Subgrain Size in a Cu-Cr-Zr Alloy After ECAP Processing and Aging
by: K. Abib, et al.
Published: (2024-04-01)

Influence of twinning thickness on the mechanical properties of crystalline-amorphous dual-phase CoCrFeNiMn high entropy alloy
by: Chen Wang, et al.
Published: (2024-11-01)

Microstructure and mechanical performances of NiCoFeAlTi high-entropy intermetallic reinforced CoCrFeMnNi high-entropy alloy composites manufactured by selective laser melting
by: Hong Yang, et al.
Published: (2024-11-01)

Pre-aging combined with multi-stage rolling processing: Enhancing precipitate-dislocation interaction for strengthening of Cu-Cr-Zr-Ni-Si alloy
by: Xiangyi Jiao, et al.
Published: (2025-08-01)

Design of novel inverse ZrO2/Ni catalysts for CO2 utilization: From CO2 to syn-methane
by: Li Li, et al.
Published: (2025-09-01)

Oxidation Behavior and Creep Resistance of Cast MC-Strengthened CoNiFeMnCr HEAs at 1100 °C
by: Patrice Berthod, et al.
Published: (2024-12-01)

Enhancing tribological performance of Cu-1Cr-0.15Zr alloy through optimized processing routes
by: E. Ahaki, et al.
Published: (2024-11-01)

Enlargement of the Surface Area of High‐Entropy Alloys with Acid Treatment as Positive Electrode for High Specific Capacitance Supercapacitors
by: Mahir Gülen, et al.
Published: (2025-05-01)

Effect of Zr addition on MnS inclusion characteristics and mechanical properties in medium carbon ferrite-pearlite steel
by: Li Hao, et al.
Published: (2024-11-01)

Study on the Effect of Pressure on the Microstructure, Mechanical Properties, and Impact Wear Behavior of Mn-Cr-Ni-Mo Alloyed Steel Fabricated by Squeeze Casting
by: Bo Qiu, et al.
Published: (2024-09-01)

Cryogenic high-pressure torsion of a single-phase CoCrFeNiMn high-entropy alloy: Nanoindentation strain-rate sensitivity and creep deformation behavior
by: M. Zare Ghomsheh, et al.
Published: (2025-10-01)

Formation of martensitic microstructure in epitaxial Ni-Mn-Ga films after fast cooling
by: Yuru Ge, et al.
Published: (2025-03-01)

Structural Engineering of the Vacuum Arc ZrN/CrN Multilayer Coatings
by: O.V. Sobol´, et al.
Published: (2016-03-01)

M Nano –Separation Axioms M_N-T_i Spaces
by: Nawras Hasan Mohammed, et al.
Published: (2023-06-01)

INFLUENCE OF ANNEALING ON HARDNESS OF Cr-Mn-Ni CAST IRONS
by: V. V. Netrebko
Published: (2015-11-01)

Microstructure and mechanical properties of Co-free AlCrFeNiTi0.2 eutectic high-entropy alloy
by: Jingjing Zhang, et al.
Published: (2024-11-01)

Effect of Sc and Zr microalloying on recrystallization behavior of 1xxx aluminum heat exchanger alloys during post-deformation annealing
by: Alyaa Bakr, et al.
Published: (2025-06-01)

Characteristics of Laser-Remelted Al–Ca–Cu–Mn (Zr) Alloys as a New Material for Additive Manufacturing
by: Nikolay V. Letyagin, et al.
Published: (2025-07-01)

Laser directed energy deposition of Cu-Cr-Zr alloy: Microstructure evolution and its influence on properties
by: Yanfang Wang, et al.
Published: (2025-07-01)

Repairing crack in Cu-Cr-Zr alloy towards forging mechanical properties via friction stir processing and aging treatment
by: Zeyu Zhang, et al.
Published: (2025-08-01)

Unveiling the effect of vacuum heat treatment on HVOF-sprayed high entropy cantor alloy coatings: Microstructure, diffusion behavior and mechanical property
by: Haotian Sun, et al.
Published: (2024-11-01)

Influence of cold drawing deformation and annealing temperature on microstructure and tensile properties of Al-Si-Sc-Zr alloy wires
by: ZHENG Tao, et al.
Published: (2025-04-01)

Microstructure and wear resistance of spherical ceramic particles reinforced FeCoNiCrMn composite coating fabricated by laser directional energy deposition
by: Zhiyuan Liu, et al.
Published: (2025-07-01)

The phase structure, hardness, and wear properties of the Cu–Cr–Zr–Nb alloy under different aging states
by: Yupeng Miao, et al.
Published: (2024-11-01)

Effect of trace silver addition on microstructure and properties of Cu-0.45Cr-0.1Zr alloy
by: Xinfeng Jiang, et al.
Published: (2024-11-01)

Improved corrosion resistance of selective laser melted NiTi alloys via nanosecond pulsed laser annealing treatment for biomedical application
by: Chao Yang, et al.
Published: (2025-07-01)

Influence of Mn on nanobainite formation kinetics and austenite retention in Al-added medium-Mn steels subjected to hybrid isothermal annealing
by: Mateusz Morawiec, et al.
Published: (2025-07-01)

Microstructure and mechanical property degradation mechanism of Cu–Cr–Zr rail after extreme electromagnetic launches
by: Chengcheng Li, et al.
Published: (2025-03-01)

Effects of Zr Alloying on Microstructure Evolution and Mechanical Properties of CoCrNi Medium Entropy Alloy
by: Ao Li, et al.
Published: (2025-03-01)