Experimental Study on the Flexural Resistance of Damaged Reinforced Concrete Beams Strengthened by Carbon Fiber Nets
To study the flexural performance of damaged reinforced concrete beams reinforced with carbon fiber nets (CFNs), seven beams were designed for a flexural test. The physical parameters, such as damage phenomena, characteristic load, deflection variation, concrete strain, reinforcement strain, and CFR...
Saved in:
| Main Authors: | , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
MDPI AG
2025-06-01
|
| Series: | Buildings |
| Subjects: | |
| Online Access: | https://www.mdpi.com/2075-5309/15/12/2097 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | To study the flexural performance of damaged reinforced concrete beams reinforced with carbon fiber nets (CFNs), seven beams were designed for a flexural test. The physical parameters, such as damage phenomena, characteristic load, deflection variation, concrete strain, reinforcement strain, and CFRP mesh strain, were analyzed using different forms of U-hoops and the preload amplitude as variables. The results show that the magnitude of the preload and the different U-hoop forms affect the ultimate load capacity, crack distribution, and deflection of the beams. Compared with the unreinforced beams, the yield load, ultimate load, and cracking load of the reinforced beams were significantly increased; CFNs reinforcement could significantly improve the flexural load-carrying capacity of the beams. Under the same preload amplitude, the X-shaped diagonal U-hoop has better diagonal crack suppression capability than the vertical U-hoop. Under secondary stress conditions, CFNs reinforcement inhibits the appearance and development of cracks and increases the flexural load capacity, which can effectively alleviate the stiffness degradation caused by the preload. The simulation of the test results using the ANSYS (v2023 R1) 2016 platform produced good agreement, with an error of about 10%, which verifies the feasibility of using the finite element method to simulate the test beam. |
|---|---|
| ISSN: | 2075-5309 |