Improving the design and technology of repair conveyor equipment
The article analyzes the methods of repair of rubberized drum belt. On the basis of the analysis it was found that replacing worn-out rubber lining of the drum is only possible at the factory after dismantling the drive station of the conveyor. The authors proposed the design of the quick change of...
Saved in:
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | Russian |
| Published: |
Siberian State Automobile and Highway University
2017-08-01
|
| Series: | Вестник СибАДИ |
| Subjects: | |
| Online Access: | https://vestnik.sibadi.org/jour/article/view/278 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | The article analyzes the methods of repair of rubberized drum belt. On the basis of the analysis it was found that replacing worn-out rubber lining of the drum is only possible at the factory after dismantling the drive station of the conveyor. The authors proposed the design of the quick change of the lining of the drum in the form of a set of separate rubber sections with threaded mount to the drum. This allows the relining of the drum on site without disassembly. |
|---|---|
| ISSN: | 2071-7296 2658-5626 |