Laser powder bed fusion of Ti6Al4V using low-cost high efficiency 450 nm diode point melting
Laser Powder Bed Fusion (LPBF) is a commonly used Additive Manufacturing (AM) method for the production of geometrically complex metal components that are used in high-value sectors. It uses high power fibre lasers directed by a galvanometric scanner to rapidly melt powdered feedstock. LPBF systems...
Saved in:
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Elsevier
2025-01-01
|
| Series: | Journal of Materials Research and Technology |
| Subjects: | |
| Online Access: | http://www.sciencedirect.com/science/article/pii/S2238785424030552 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Laser Powder Bed Fusion (LPBF) is a commonly used Additive Manufacturing (AM) method for the production of geometrically complex metal components that are used in high-value sectors. It uses high power fibre lasers directed by a galvanometric scanner to rapidly melt powdered feedstock. LPBF systems are expensive, making them inaccessible to many sectors and have challenges related to in-process thermal control, production of large components and scalability limitations. As an alternative to traditional LPBF, this study introduces Diode Point Melting (DPM), combining multiple low-power, energy efficient blue (450 nm) diode lasers into a single focal point. DPM's laser source is fixed to a scanning gantry axis that traverses across the powder bed, creating a low-cost alternative to traditional LPBF (∼x10 lower laser hardware cost). DPM processes slower than LPBF, generating reduced thermal gradients with improved material laser energy absorption due to use of a shorter laser wavelength. DPM processing of Ti6Al4V was undertaken using 38W creating samples that were 99.41% dense. DPM's slower melt pool solidification rate enabled the formation of a stable α + β phase creating harder samples. The grain size of Ti6Al4V samples fabricated using DPM were significantly larger compared to those produced by LPBF (grain size area ∼ x30 larger). Young's modulus of the samples produced via DPM was found to be higher than LPBF manufactured Ti6Al4V, indicating increased stiffness. DPM is a promising low-cost alternative to LPBF, offering the opportunity to make net-shape metal AM more widely accessible in both academic and industrial sectors. |
|---|---|
| ISSN: | 2238-7854 |