CO2 absorption performance of biogas slurry enhanced by biochar as a potential solvent in once-through CO2 chemical absorption process

Carbon capture, utilization, and storage (CCUS), offers a promising avenue for mitigating CO2 emissions, in which the big challenge is the high CO2 capture cost. A novel CCUS technology called once-through CO2 chemical absorption using biogas slurry, could potentially reduce the CO2 capture cost thr...

Full description

Saved in:
Bibliographic Details
Main Authors: Yizhong Duan, Yang Liu, Haonan Liu, Zhan Shi, Xinran Shen, Xiantong Sun, Shixin Zhao, Shuiping Yan, Feihong Liang
Format: Article
Language:English
Published: Elsevier 2024-12-01
Series:Carbon Capture Science & Technology
Subjects:
Online Access:http://www.sciencedirect.com/science/article/pii/S2772656824001295
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:Carbon capture, utilization, and storage (CCUS), offers a promising avenue for mitigating CO2 emissions, in which the big challenge is the high CO2 capture cost. A novel CCUS technology called once-through CO2 chemical absorption using biogas slurry, could potentially reduce the CO2 capture cost through decreasing the energy consumption greatly during CO2 capture. This technology, however, is constrained by the CO2 absorption capacity of biogas slurry. To enhance the CO2 capture capacity of this innovative technology, we proposed a method to enhance CO2 absorption by integrating biochar into biogas slurry. Results indicated that the CO2 absorption capacity of biogas slurry improved by biochar varied with the type of biochar adopted. Among all the investigated biochar, the wood biochar like sea buckthorn and sand willow exhibited the lowest CO2 capture enhancement, with 0.82±0.19 mmol/g and 0.81±0.30 mmol/g, respectively. Biochar from C4 plants like corn stalks and cobs demonstrated the highest enhancement, with 2.11±0.24 mmol/g and 2.47±0.86 mmol/g, respectively. The enhancement driven by C3 plant biochar like millet stalks and shells was intermediate, with 1.62±0.47 mmol/g and 1.62±0.46 mmol/g, respectively. The primary factor for promoting CO2 absorption in the biochar-based biogas slurry was the increase in pH of biogas slurry. The total pore volume of biochar was the principal material property that enhanced CO2 absorption, followed by the EC and BET surface areas of biochar. Increasing the carbonization temperature of biochar could also enhance the CO2 absorption capacity by biogas slurry. In CO2-rich biochar-based biogas slurry, CO2 primarily existed as HCO3− and carbamate. However, for the influence of the biochar's pore structure, CO2 in the CO2-rich biochar-based biogas slurry was more stable than that in CO2-rich biogas slurry.
ISSN:2772-6568