Multi-material 3D printed composites inspired by nacre: a hard/soft mechanical interplay
Abstract Structural materials are used extensively in nature where mechanical function is required. These structures are composites consisting of soft and, in some cases, hard phases precisely distributed over different length scales. Bio-inspiration aims at producing materials with structure, desig...
Saved in:
| Main Authors: | , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Nature Portfolio
2025-02-01
|
| Series: | Scientific Reports |
| Subjects: | |
| Online Access: | https://doi.org/10.1038/s41598-025-91080-2 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| _version_ | 1850026052167925760 |
|---|---|
| author | Marco Curto Jack Dowsett Alexander P. Kao Gianluca Tozzi Asa H. Barber |
| author_facet | Marco Curto Jack Dowsett Alexander P. Kao Gianluca Tozzi Asa H. Barber |
| author_sort | Marco Curto |
| collection | DOAJ |
| description | Abstract Structural materials are used extensively in nature where mechanical function is required. These structures are composites consisting of soft and, in some cases, hard phases precisely distributed over different length scales. Bio-inspiration aims at producing materials with structure, design and/or mechanical properties adopted from biological tissues. To reproduce complex structures found in nature, additive manufacturing (AM) using three-dimensional printing (3DP) is an attractive method to assemble complex topologies with resolutions approaching the micro and nano-composition. Specifically, high-resolution MultiJetPrinting (MJP) 3D printing allows the simultaneous deposition of soft and hard photo curable plastic resins. Nacre is a prevalent example of a complex biological composite material organization that can test the ability of MJP to manufacture a bio-inspired engineering structure, where the organization of materials in nacre is optimized to avoid catastrophic failure. The ability to generate complex 3D organizations required to mimic the structure of nacre by controlled organization of soft and hard materials is achieved here using a generative design approach. Such a generative design is further enhanced by incorporating two differing MJP directions that provide relatively strong and weak interfaces between the soft and hard material phases. Consideration of classical stress transfer theory between at a hard material reinforcement interface was shown to correlate with experimental observations of mechanical performance and failure in 3D printed nacre inspired composites. Thus, the ability to distribute materials with a range of mechanical properties and incorporate further interfacial design is demonstrated. The approach presented is flexible and allows complex bio-inspired composites to be 3D printed that incorporate different interfacial quality through changing printing direction. |
| format | Article |
| id | doaj-art-bc33affc34924eb7b9999f6f5332e931 |
| institution | DOAJ |
| issn | 2045-2322 |
| language | English |
| publishDate | 2025-02-01 |
| publisher | Nature Portfolio |
| record_format | Article |
| series | Scientific Reports |
| spelling | doaj-art-bc33affc34924eb7b9999f6f5332e9312025-08-20T03:00:39ZengNature PortfolioScientific Reports2045-23222025-02-0115111210.1038/s41598-025-91080-2Multi-material 3D printed composites inspired by nacre: a hard/soft mechanical interplayMarco Curto0Jack Dowsett1Alexander P. Kao2Gianluca Tozzi3Asa H. Barber4School of Mechanical and Design Engineering, University of PortsmouthSchool of Mechanical and Design Engineering, University of PortsmouthSchool of Mechanical and Design Engineering, University of PortsmouthSchool of Engineering, University of GreenwichDepartment of Engineering, City St. George’s, University of LondonAbstract Structural materials are used extensively in nature where mechanical function is required. These structures are composites consisting of soft and, in some cases, hard phases precisely distributed over different length scales. Bio-inspiration aims at producing materials with structure, design and/or mechanical properties adopted from biological tissues. To reproduce complex structures found in nature, additive manufacturing (AM) using three-dimensional printing (3DP) is an attractive method to assemble complex topologies with resolutions approaching the micro and nano-composition. Specifically, high-resolution MultiJetPrinting (MJP) 3D printing allows the simultaneous deposition of soft and hard photo curable plastic resins. Nacre is a prevalent example of a complex biological composite material organization that can test the ability of MJP to manufacture a bio-inspired engineering structure, where the organization of materials in nacre is optimized to avoid catastrophic failure. The ability to generate complex 3D organizations required to mimic the structure of nacre by controlled organization of soft and hard materials is achieved here using a generative design approach. Such a generative design is further enhanced by incorporating two differing MJP directions that provide relatively strong and weak interfaces between the soft and hard material phases. Consideration of classical stress transfer theory between at a hard material reinforcement interface was shown to correlate with experimental observations of mechanical performance and failure in 3D printed nacre inspired composites. Thus, the ability to distribute materials with a range of mechanical properties and incorporate further interfacial design is demonstrated. The approach presented is flexible and allows complex bio-inspired composites to be 3D printed that incorporate different interfacial quality through changing printing direction.https://doi.org/10.1038/s41598-025-91080-2BioinspiredAdditive manufacturing3D printingCompositesX-ray tomographyMulti-material |
| spellingShingle | Marco Curto Jack Dowsett Alexander P. Kao Gianluca Tozzi Asa H. Barber Multi-material 3D printed composites inspired by nacre: a hard/soft mechanical interplay Scientific Reports Bioinspired Additive manufacturing 3D printing Composites X-ray tomography Multi-material |
| title | Multi-material 3D printed composites inspired by nacre: a hard/soft mechanical interplay |
| title_full | Multi-material 3D printed composites inspired by nacre: a hard/soft mechanical interplay |
| title_fullStr | Multi-material 3D printed composites inspired by nacre: a hard/soft mechanical interplay |
| title_full_unstemmed | Multi-material 3D printed composites inspired by nacre: a hard/soft mechanical interplay |
| title_short | Multi-material 3D printed composites inspired by nacre: a hard/soft mechanical interplay |
| title_sort | multi material 3d printed composites inspired by nacre a hard soft mechanical interplay |
| topic | Bioinspired Additive manufacturing 3D printing Composites X-ray tomography Multi-material |
| url | https://doi.org/10.1038/s41598-025-91080-2 |
| work_keys_str_mv | AT marcocurto multimaterial3dprintedcompositesinspiredbynacreahardsoftmechanicalinterplay AT jackdowsett multimaterial3dprintedcompositesinspiredbynacreahardsoftmechanicalinterplay AT alexanderpkao multimaterial3dprintedcompositesinspiredbynacreahardsoftmechanicalinterplay AT gianlucatozzi multimaterial3dprintedcompositesinspiredbynacreahardsoftmechanicalinterplay AT asahbarber multimaterial3dprintedcompositesinspiredbynacreahardsoftmechanicalinterplay |