Pengaruh Sudut Geram dan Parameter Pemesinan Terhadap Keausan Tepi Pahat High Speed Steel (HSS) pada Proses Bubut Glass Fibre Reinforce Polymer (GFRP)
The high rate of tool wear is an obstacle in machining of GFRP material. This research was conducted to investigate turning behavior towards the occurrence of flank wear on HSS devices by varying machining parameters such as rake angle, spindle speed and feed rate. The GFRP of workpiece was made fro...
Saved in:
| Main Authors: | , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Department of Mechanical Engineering, Faculty of Engineering, Universitas Andalas
2018-04-01
|
| Series: | Metal: Jurnal Sistem Mekanik dan Termal |
| Subjects: | |
| Online Access: | https://metal.ft.unand.ac.id/index.php/metal/article/view/58 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| _version_ | 1832574971366342656 |
|---|---|
| author | Muhammad Yusra Nusa Firman Ridwan |
| author_facet | Muhammad Yusra Nusa Firman Ridwan |
| author_sort | Muhammad Yusra Nusa |
| collection | DOAJ |
| description | The high rate of tool wear is an obstacle in machining of GFRP material. This research was conducted to investigate turning behavior towards the occurrence of flank wear on HSS devices by varying machining parameters such as rake angle, spindle speed and feed rate. The GFRP of workpiece was made from resin as a matrix and the glass type Chopped Strand Mat as fiber. The rack angle of tool is varied to 5º, 10º, 15º, 20º. Taguchi method was used to analized data experiments using orthogonal array L8. The experimental data shows that the spindle speed is the most influential parameter on flank wear with a S/N ratio of 4.10, followed by the feed rate with a S/N ratio of 3.08. Increasing rake angle can reduce wear, the smallest wear value was obtained at an angle of 20º. |
| format | Article |
| id | doaj-art-bb37592880454c60b3313ceb3850b1f8 |
| institution | Kabale University |
| issn | 2598-1137 2597-4483 |
| language | English |
| publishDate | 2018-04-01 |
| publisher | Department of Mechanical Engineering, Faculty of Engineering, Universitas Andalas |
| record_format | Article |
| series | Metal: Jurnal Sistem Mekanik dan Termal |
| spelling | doaj-art-bb37592880454c60b3313ceb3850b1f82025-02-01T10:20:39ZengDepartment of Mechanical Engineering, Faculty of Engineering, Universitas AndalasMetal: Jurnal Sistem Mekanik dan Termal2598-11372597-44832018-04-0121404610.25077/metal.2.1.40-46.201824Pengaruh Sudut Geram dan Parameter Pemesinan Terhadap Keausan Tepi Pahat High Speed Steel (HSS) pada Proses Bubut Glass Fibre Reinforce Polymer (GFRP)Muhammad Yusra Nusa0Firman Ridwan1Universitas AndalasUniversitas AndalasThe high rate of tool wear is an obstacle in machining of GFRP material. This research was conducted to investigate turning behavior towards the occurrence of flank wear on HSS devices by varying machining parameters such as rake angle, spindle speed and feed rate. The GFRP of workpiece was made from resin as a matrix and the glass type Chopped Strand Mat as fiber. The rack angle of tool is varied to 5º, 10º, 15º, 20º. Taguchi method was used to analized data experiments using orthogonal array L8. The experimental data shows that the spindle speed is the most influential parameter on flank wear with a S/N ratio of 4.10, followed by the feed rate with a S/N ratio of 3.08. Increasing rake angle can reduce wear, the smallest wear value was obtained at an angle of 20º.https://metal.ft.unand.ac.id/index.php/metal/article/view/58gfrp flank wear, rake angle, spindle speed, feed rate |
| spellingShingle | Muhammad Yusra Nusa Firman Ridwan Pengaruh Sudut Geram dan Parameter Pemesinan Terhadap Keausan Tepi Pahat High Speed Steel (HSS) pada Proses Bubut Glass Fibre Reinforce Polymer (GFRP) Metal: Jurnal Sistem Mekanik dan Termal gfrp flank wear, rake angle, spindle speed, feed rate |
| title | Pengaruh Sudut Geram dan Parameter Pemesinan Terhadap Keausan Tepi Pahat High Speed Steel (HSS) pada Proses Bubut Glass Fibre Reinforce Polymer (GFRP) |
| title_full | Pengaruh Sudut Geram dan Parameter Pemesinan Terhadap Keausan Tepi Pahat High Speed Steel (HSS) pada Proses Bubut Glass Fibre Reinforce Polymer (GFRP) |
| title_fullStr | Pengaruh Sudut Geram dan Parameter Pemesinan Terhadap Keausan Tepi Pahat High Speed Steel (HSS) pada Proses Bubut Glass Fibre Reinforce Polymer (GFRP) |
| title_full_unstemmed | Pengaruh Sudut Geram dan Parameter Pemesinan Terhadap Keausan Tepi Pahat High Speed Steel (HSS) pada Proses Bubut Glass Fibre Reinforce Polymer (GFRP) |
| title_short | Pengaruh Sudut Geram dan Parameter Pemesinan Terhadap Keausan Tepi Pahat High Speed Steel (HSS) pada Proses Bubut Glass Fibre Reinforce Polymer (GFRP) |
| title_sort | pengaruh sudut geram dan parameter pemesinan terhadap keausan tepi pahat high speed steel hss pada proses bubut glass fibre reinforce polymer gfrp |
| topic | gfrp flank wear, rake angle, spindle speed, feed rate |
| url | https://metal.ft.unand.ac.id/index.php/metal/article/view/58 |
| work_keys_str_mv | AT muhammadyusranusa pengaruhsudutgeramdanparameterpemesinanterhadapkeausantepipahathighspeedsteelhsspadaprosesbubutglassfibrereinforcepolymergfrp AT firmanridwan pengaruhsudutgeramdanparameterpemesinanterhadapkeausantepipahathighspeedsteelhsspadaprosesbubutglassfibrereinforcepolymergfrp |