Water saturation modeling in carbonate reservoirs using the bulk volume water approach
Abstract An ideal Saturation Height Function (SHF) should account for rock and fluid properties, as well as the Free Water Level (FWL), while ensuring consistency between measured and modeled data in a 3D reservoir model. This study employs the Bulk Volume Water (BVW) concept with the Bangestan and...
Saved in:
| Main Authors: | , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
SpringerOpen
2025-05-01
|
| Series: | Journal of Petroleum Exploration and Production Technology |
| Subjects: | |
| Online Access: | https://doi.org/10.1007/s13202-025-02006-7 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Abstract An ideal Saturation Height Function (SHF) should account for rock and fluid properties, as well as the Free Water Level (FWL), while ensuring consistency between measured and modeled data in a 3D reservoir model. This study employs the Bulk Volume Water (BVW) concept with the Bangestan and COSTA open-source carbonate datasets to develop a simple and practical SHF. A MATLAB Graphical User Interface (GUI) was designed to facilitate computations, including back-calculating capillary pressure (Pc) curves for comparison with input data and conducting error analysis. BVW is determined as the product of porosity and saturation at each Pc curve pressure step across a porosity range of 0.04 to 0.35. The relationship between BVW and pressure suggests that BVW is independent of porosity within the reservoir, allowing a single equation to represent all porosity variations. A power correlation with two constants was evaluated, and the correlation constants were derived from the BVW-pressure correlation. The results demonstrated strong agreement with the input data, and the generated capillary pressure curves closely matched the input Pc curves, confirming the reliability of the derived constants. An exponential correlation with four constants was tested on the same dataset, yielding a stronger correlation than the power function. The J-function was applied for comparison, but its predicted capillary pressure curves showed weaker correlation with the input data. Error analysis confirms that BVW-based SHFs offer a robust, permeability-independent alternative to the J-function, simplifying reservoir modeling by the need for rock type classification. The findings suggest that incorporating moderate- to high-porosity data improves the accuracy of estimated constants and enhances Pc curve synthesis. |
|---|---|
| ISSN: | 2190-0558 2190-0566 |