Influence of time of annealing on anneal hardening effect of a cast CuZn alloy
Investigated cast copper alloy containing 8at%Zn of a solute. For comparison parallel specimens made from cast pure copper. Copper and copper alloy were subjected to cold rolling with different a final reduction of 30,50 and 70%. The cold rolled copper and copper alloy samples were isochronally and...
Saved in:
Main Authors: | , , |
---|---|
Format: | Article |
Language: | English |
Published: |
University of Belgrade, Technical Faculty, Bor
2003-01-01
|
Series: | Journal of Mining and Metallurgy. Section B: Metallurgy |
Subjects: | |
Online Access: | http://www.doiserbia.nb.rs/img/doi/1450-5339/2003/1450-53390304489N.pdf |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Summary: | Investigated cast copper alloy containing 8at%Zn of a solute. For comparison parallel specimens made from cast pure copper. Copper and copper alloy were subjected to cold rolling with different a final reduction of 30,50 and 70%. The cold rolled copper and copper alloy samples were isochronally and isothermally annealed up to recrystallization temperature. After that the values of hardness, strength and electrical conductivity were measured and X-ray analysis was performed. These investigations show that anneal hardening effect at alloys was attained under recrystallization temperature in the temperature range of 180-3000C, followed with an increase in hardness. The amount of strengthening increase with increasing degree of prior cold work. Also the X-ray analysis show the change of lattice parameter during annealing when anneal hardening effect was attained. |
---|---|
ISSN: | 1450-5339 |