Fabrication and Sc-Refinement of SiCp/A356 Composites by Vacuum Stirring Casting Method
Aluminum matrix composites reinforced with 10 vol.% SiC particles (SiCp/Al MMCs) were prepared throughthe vacuum stirring method from SiC particles preoxidated at high temperature, followed by posttreatments of remelting and Sc addition treatment. Major problems during vacuum stirring preparation we...
Saved in:
Main Authors: | Fukun Chen, Kuangfei Wang |
---|---|
Format: | Article |
Language: | English |
Published: |
Wiley
2022-01-01
|
Series: | Journal of Electrical and Computer Engineering |
Online Access: | http://dx.doi.org/10.1155/2022/5460706 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Similar Items
-
Effect of hot rolling on microstructures and mechanical properties of SiCp/A356 aluminum matrix composites
by: Yajun Luo, et al.
Published: (2024-11-01) -
Strengthening mechanism of particle gradation in 55 vol% SiCp/6061Al composites fabricated by semi-solid hot isostatic pressing
by: Kun Cheng, et al.
Published: (2025-01-01) -
Hot Deformation Behavior and Workability Characteristic of SiCp/Al-Cu-Mg-Ag Composite
by: Ning Li, et al.
Published: (2025-01-01) -
Investigation on influence of SiCp on three-body abrasive wear behaviour of glass/epoxy composites
by: Ajith G. Joshi, et al.
Published: (2021-04-01) -
The Microstructure and Thermal Conductivity of Pressureless Infiltrated SiCp/Al Composites Containing Electroless Nickel Platings
by: Aihua Zou, et al.
Published: (2015-01-01)