渐开线直齿锥齿轮等距修形正交优化设计
For the phenomenon of meshing interference,impact and end contact of spur bevel gear in working,the idea of orthogonal design for isometric modification is put forward,the principle of isometric modification and its manufacturing process is introduced.In order to optimize the effect of modification,...
Saved in:
| Main Authors: | , |
|---|---|
| Format: | Article |
| Language: | zho |
| Published: |
Editorial Office of Journal of Mechanical Transmission
2013-01-01
|
| Series: | Jixie chuandong |
| Online Access: | http://www.jxcd.net.cn/thesisDetails#10.16578/j.issn.1004.2539.2013.02.016 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | For the phenomenon of meshing interference,impact and end contact of spur bevel gear in working,the idea of orthogonal design for isometric modification is put forward,the principle of isometric modification and its manufacturing process is introduced.In order to optimize the effect of modification,the amount of isometric modification,modification height and the modification area of these three factors most affect the effect on modification are identified,three levels of each factor are selected for orthogonal experimental design,and then three-dimensional solid models of standard gears and modification gears are established by SolidWorks,based on gear dynamic FEA simulation analysis with ANSYS/LS-DYNA,the various factors affect the degree of importance on the effect of isometric modification is identified,and then the optimal isometric modification parameters are obtained.Through the simulation analysis,the results indicate that optimal isometric modification not only reduce meshing interference,impact and vibration effectively but also can avoid the edge effect,the load distribution is homogenized,and the bearing capacity of gear pair is improved,it has the comprehensive effect of profile modification and longitudinal modification.The conclusion can provide some references for perfecting isometric modification theory of straight bevel gear. |
|---|---|
| ISSN: | 1004-2539 |