Experimental Study on Springback Properties of 6061 Aluminum in V-Bending
Sheet metal bending is one of the most commonly applied methods among sheet metal forming operations. In this study, the springback behavior of aluminum alloys of different thicknesses was examined by performing v-bending processes at different die angles and widths. The experiments were carried out...
Saved in:
| Main Authors: | , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Sakarya University
2024-06-01
|
| Series: | Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi |
| Subjects: | |
| Online Access: | https://dergipark.org.tr/tr/download/article-file/3636657 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| _version_ | 1850252084051443712 |
|---|---|
| author | Ahmed Ozan Örnekci Seçil Ekşi |
| author_facet | Ahmed Ozan Örnekci Seçil Ekşi |
| author_sort | Ahmed Ozan Örnekci |
| collection | DOAJ |
| description | Sheet metal bending is one of the most commonly applied methods among sheet metal forming operations. In this study, the springback behavior of aluminum alloys of different thicknesses was examined by performing v-bending processes at different die angles and widths. The experiments were carried out on 1 and 1.5 mm thick plates at die angles of 140°, 150° and 160° and three different die widths: 10 mm, 16 mm and 20 mm. In this experimental study, it was observed that springback decreased as the die width increased. As the die angle increased, springback values also increased. It has been observed that sheet thickness has little effect on springback. As the sheet thickness increased, the amount of springback decreased. The lowest springback value of 0.1° was obtained in the 1.5 mm thick specimen with a die width of 10 mm and a die angle of 140°. The highest spring-go value of -2.7° was obtained in the 1 mm thick specimen with a die width of 20 mm and a die angle of 140°. As a result of the variance (ANOVA) analysis, it was seen that the die width had a more significant effect (78.42%) on springback than the die angle. The effect of die angle on springback is 10.73%. As a result of the experiments and statistical analysis, it was seen that the parameter that most affects springback is die width. |
| format | Article |
| id | doaj-art-b3ac91d2d3174b92ab54f3f8a8fe65d3 |
| institution | OA Journals |
| issn | 2147-835X |
| language | English |
| publishDate | 2024-06-01 |
| publisher | Sakarya University |
| record_format | Article |
| series | Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi |
| spelling | doaj-art-b3ac91d2d3174b92ab54f3f8a8fe65d32025-08-20T01:57:44ZengSakarya UniversitySakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi2147-835X2024-06-0128364665310.16984/saufenbilder.141397628Experimental Study on Springback Properties of 6061 Aluminum in V-BendingAhmed Ozan Örnekci0https://orcid.org/0000-0001-5519-8673Seçil Ekşi1https://orcid.org/0000-0002-1404-718XSAKARYA UNIVERSITYSAKARYA UNIVERSITYSheet metal bending is one of the most commonly applied methods among sheet metal forming operations. In this study, the springback behavior of aluminum alloys of different thicknesses was examined by performing v-bending processes at different die angles and widths. The experiments were carried out on 1 and 1.5 mm thick plates at die angles of 140°, 150° and 160° and three different die widths: 10 mm, 16 mm and 20 mm. In this experimental study, it was observed that springback decreased as the die width increased. As the die angle increased, springback values also increased. It has been observed that sheet thickness has little effect on springback. As the sheet thickness increased, the amount of springback decreased. The lowest springback value of 0.1° was obtained in the 1.5 mm thick specimen with a die width of 10 mm and a die angle of 140°. The highest spring-go value of -2.7° was obtained in the 1 mm thick specimen with a die width of 20 mm and a die angle of 140°. As a result of the variance (ANOVA) analysis, it was seen that the die width had a more significant effect (78.42%) on springback than the die angle. The effect of die angle on springback is 10.73%. As a result of the experiments and statistical analysis, it was seen that the parameter that most affects springback is die width.https://dergipark.org.tr/tr/download/article-file/3636657aluminumsheet metal formingv-bendingspringback |
| spellingShingle | Ahmed Ozan Örnekci Seçil Ekşi Experimental Study on Springback Properties of 6061 Aluminum in V-Bending Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi aluminum sheet metal forming v-bending springback |
| title | Experimental Study on Springback Properties of 6061 Aluminum in V-Bending |
| title_full | Experimental Study on Springback Properties of 6061 Aluminum in V-Bending |
| title_fullStr | Experimental Study on Springback Properties of 6061 Aluminum in V-Bending |
| title_full_unstemmed | Experimental Study on Springback Properties of 6061 Aluminum in V-Bending |
| title_short | Experimental Study on Springback Properties of 6061 Aluminum in V-Bending |
| title_sort | experimental study on springback properties of 6061 aluminum in v bending |
| topic | aluminum sheet metal forming v-bending springback |
| url | https://dergipark.org.tr/tr/download/article-file/3636657 |
| work_keys_str_mv | AT ahmedozanornekci experimentalstudyonspringbackpropertiesof6061aluminuminvbending AT secileksi experimentalstudyonspringbackpropertiesof6061aluminuminvbending |