The Effect of Heat Treatment on the Microstructure and Properties of H13ESR Large Mould Steel Forging Round Bar

The Effect of Heat Treatment on the Microstructure and Properties of H13ESR Large Mould Steel Forging Round Bar

In order to meet the technical requirements of H13ESR large sizes and high-quality mould steel forged round metallographic structure and impact energy， three heat treatment processes were used to trial-produce forged round bar with diameter of 600 mm H13ESR and the inspection results were compared.T...

Full description

Saved in:

Bibliographic Details
Main Author:	Li　Jin, Zhou　Xu, Su　Chao, Yan　Lei
Format:	Article
Language:	zho
Published:	Editorial Office of Special Steel 2025-02-01
Series:	Teshugang
Subjects:	online warter cooling after forged； offine solid solution； water and air cooling alternating quenching； spheroidization annealing； liquid precipitated carbides； metallographic structure
Online Access:	https://www.specialsteeljournal.com/fileup/1003-8620/PDF/2024-00112.pdf
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Increasing the efficiency of forging tools by Toyota diffusion process
by: Željko Stojanović, et al.
Published: (2015-03-01)

LOW ALLOY STEEL SHAFT SURFACE REGENERATIVE WELDING WITH MICRO-JET COOLING
by: Bożena SZCZUCKA-LASOTA, et al.
Published: (2019-03-01)

Maximizing precipitation hardening effect enables ultrahigh strength in a coarse-grained Mg-13Gd forging alloy
by: Dongdong Zhang, et al.
Published: (2024-10-01)

Effect of open die forging and cooling rate on the precipitation of secondary phases and corrosion properties of a cast UNS S32760 super duplex stainless steel
by: E. Pitacco, et al.
Published: (2024-11-01)

Asymmetric Cooling Process for Towing Hooks Forgings
by: Jarosław Bartnicki, et al.
Published: (2024-08-01)

Lattice Structure for Improving Cooling Uniformity in HPDC Mould Corners
by: Essam Abo-Serie, et al.
Published: (2025-01-01)

Microstructure and mechanical properties of annealed Ti−6Al−3Nb−2Zr−1Mo titanium alloys
by: LI Ye, et al.
Published: (2021-08-01)

Metallographic analysis of an iron vessel fragment from the Late Saka kurgan of the Kyzylzhartas burial ground, Central Kazakhstan
by: Beisenov A.Z., et al.
Published: (2025-06-01)

An innovative thermal simulation study of microstructure improvement by delay forging during solidification
by: Jiongshen Chen, et al.
Published: (2024-11-01)

Cooling of Duplex Stainless‐Steel Bars With Different Water and Air Impinging Jet Flow Rates
by: Pavel Romanov, et al.
Published: (2025-04-01)

Specialized iron production in Roman times – metallographic examination of forging pre-product bars
by: Szilvia Gyöngyösi, et al.
Published: (2023-09-01)

Transformation induced plasticity (TRIP) due to precipitation during continuous tempering of quenched and tempered steels
by: Niki Nouri, et al.
Published: (2025-01-01)

Cooling rate-dependent microstructural evolution: Segregation and precipitated phase in S30432 steel for ultra-supercritical power plants
by: Shijun Wang, et al.
Published: (2025-05-01)

Effect of low aluminum additions in the microstructure and mechanical properties of hot forged high-manganese steels
by: Morales-Cruz E.U., et al.
Published: (2023-01-01)

Characterization of Tool Clamping Conditions in Forging Hammers
by: Nico Wagner, et al.
Published: (2022-06-01)

Effect of forging sequence and heat treatment on microstructure of high-duty power-plant shaft made of Cr-Mo ultra-high strength steel
by: Skubisz P., et al.
Published: (2023-01-01)

Physics-Informed Preform Design for Flashless 3D Forging via Material Point Backtracking and Finite Element Simulations
by: Gracious Ngaile, et al.
Published: (2025-06-01)

Effect of cooling temperature on microstructure and mechanical properties of Nb microalloyed hot-rolled rebar
by: Yafei Jiang, et al.
Published: (2024-11-01)

Investigation of the microstructure evolution of 7CrMn2WMo economy‑alloyed steel in a new design forging tool implementing shear deformations
by: S. N. Lezhnev, et al.
Published: (2021-12-01)

Influence of forging on the microstructure and tensile properties of Al–based vortex plate
by: Yang Yang, et al.
Published: (2024-01-01)

Effect of holding time on improving the microstructure and mechanical properties of die-forged AZ80-Ce magnesium alloys
by: Tianyi Ni, et al.
Published: (2024-11-01)

Forming regularity of Mo–Re alloy powders by cold isostatic pressing
by: HE Haoran, et al.
Published: (2025-02-01)

Effects of continuous cooling and isothermal cooling parameters on microstructure and mechanical properties of EH420 marine steel
by: Hui Liu, et al.
Published: (2025-01-01)

Enhancement of microstructure homogeneity and hardness after heat treatment of forged flex splines with CNN-based preform design
by: Joonhee Park, et al.
Published: (2025-09-01)

Simulation Study on the Effect of Pre-cooling Quenching Process on Deformation of Half Axle Gear After Heat Treatment
by: Sun Siyuan, et al.
Published: (2018-01-01)

Precipitation Dynamics and Mechanical Properties Analysis of a Nickel-Based Superalloy Cooled Under Different Rates
by: Jinhe Shi, et al.
Published: (2025-07-01)

Increasing the efficiency of forging tools by thermal diffusion boronizing
by: Željko Stojanović, et al.
Published: (2017-03-01)

Effect of spheroidized microstructure on quenching and tempering characteristics and corrosion resistance of AISI 420-type steel
by: LÜ Chuan-jiang, et al.
Published: (2019-09-01)

Fault Diagnosis Method of Forging Press Based on Improved CNN
by: Chao Yuan, et al.
Published: (2024-01-01)

BOUNDARY ELEMENT DETERMINATION OF STRAIN UNIFORM DISTRIBUTION CONDITIONS IN FORGINGS PRODUCED UNDER BROACHING BY RADIAL ROLLING-IMPRESSION DIES
by: Armenak V. Vovchenko
Published: (2012-08-01)

Forging plant OJSC «MAZ». 70 years of history and prospects of development
by: P. S. Gurchenko, et al.
Published: (2019-08-01)

Surface Cracking in 05Cr17Ni4Cu4Nb Precipitation-Hardened Stainless Steel During Secondary Forging： Mechanisms and Solutions
by: Zhao　Jiali, Xin　Ruishan, Yu　Zhanyang, Cao　Chenxing, Xue　Feng, He　Yudong, Zhou　Peng
Published: (2025-08-01)

Precision Forging Technics and Precision Forging Machining Experiment of Driven Spiral Bevel Gear
by: Zhang Hua, et al.
Published: (2016-01-01)

A review of heat treatment processes for bainitic steel
by: Yupeng Zhang, et al.
Published: (2025-07-01)

Correlation Between Structure, Microstructure, and Magnetic Properties of AlCoCrFeNi High-Entropy Alloy
by: Renee Joselin Sáenz-Hernández, et al.
Published: (2025-05-01)

Simulation of the Forging Process of a Bearing Ring Using MATLAB Software
by: Marian-Iulian NEACȘU
Published: (2024-12-01)

Effect of Nickel Content and Cooling Rate on the Microstructure of as Cast 316 Stainless Steels
by: Lei Chen, et al.
Published: (2025-02-01)

Microstructure and mechanical properties of solid-state recycled H11 steels after annealing
by: LIU Xinggang, et al.
Published: (2024-12-01)

ANALYSIS OF POSSIBILITIES OF EVAPORATIVE COOLING IN AUTONOMOUS AND COMBINED SYSTEMS
by: Doroshenko A.V., et al.
Published: (2009-08-01)

Tensile and fatigue behaviour of as-forged AZ31B extrusion
by: A. Gryguc, et al.
Published: (2016-10-01)