Implementation of a Current Harmonics Suppression Strategy for a Six-Phase Permanent Magnet Synchronous Motor
This paper proposes a current harmonic suppression strategy that combines harmonic synchronous rotating frame (HSRF) current feedback control and back-electromotive force harmonic (BEMFH) feedforward compensation to suppress the fifth and seventh current harmonics of a six-phase permanent magnet syn...
Saved in:
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
MDPI AG
2025-01-01
|
| Series: | Energies |
| Subjects: | |
| Online Access: | https://www.mdpi.com/1996-1073/18/3/665 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | This paper proposes a current harmonic suppression strategy that combines harmonic synchronous rotating frame (HSRF) current feedback control and back-electromotive force harmonic (BEMFH) feedforward compensation to suppress the fifth and seventh current harmonics of a six-phase permanent magnet synchronous motor (PMSM). The current harmonics of six-phase PMSMs vary with the current due to manufacturing imperfections and the inverter nonlinearity effect. Using fixed-parameter BEMFH feedforward compensation cannot completely eliminate current harmonics. This paper integrates a closed-loop harmonic current control strategy, using HSRF in the differential mode of the six-phase PMSM rotor rotating frame to effectively mitigate current harmonic variations caused by load changes. The controller adapts a Texas Instrument microcontroller featuring encoder interfaces, complementary pulse width modulation (PWM), and analog–digital converters (ADC) to simplify the board design. The rotor angle feedback is provided by a 12-pole resolver in conjunction with an Analog Device resolver-to-digital converter (RDC). The specifications of the six-phase PMSM are as follows: 12 poles, 1200 rpm, 200 A (rms), and 600 V DC bus. The total harmonic distortion (THD) of the phase current for harmonics below the 21st order was reduced from 31.71% to 4.84% under the test conditions of 1200 rpm rotor speed and 200 A peak phase current. Specifically, the fifth and seventh harmonics were reduced from 29.98% and 9.72% to 2.74% and 1.21%, respectively. These results validate the feasibility of the proposed current harmonic suppression strategy. |
|---|---|
| ISSN: | 1996-1073 |