AMoRE: Additive Manufacturing of RIS Elements
A deep investigation of Reconfigurable Intelligent Surfaces (RIS) and Holographic MIMO (H-MIMO) surfaces in 5G and beyond systems requires numerous tests with various prototypes. Traditional prototyping of these surfaces relies on expensive or time-consuming printed circuit board technologies. Alter...
Saved in:
| Main Authors: | , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
IEEE
2025-01-01
|
| Series: | IEEE Access |
| Subjects: | |
| Online Access: | https://ieeexplore.ieee.org/document/11123852/ |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| _version_ | 1849223102759698432 |
|---|---|
| author | Andrey Tyarin Kirill Glinskiy Roman Zlobin Aleksey Kureev Evgeny Khorov |
| author_facet | Andrey Tyarin Kirill Glinskiy Roman Zlobin Aleksey Kureev Evgeny Khorov |
| author_sort | Andrey Tyarin |
| collection | DOAJ |
| description | A deep investigation of Reconfigurable Intelligent Surfaces (RIS) and Holographic MIMO (H-MIMO) surfaces in 5G and beyond systems requires numerous tests with various prototypes. Traditional prototyping of these surfaces relies on expensive or time-consuming printed circuit board technologies. Alternatively, additive manufacturing, particularly 3D-printing, offers rapid prototyping of radio frequency components with sophisticated geometry and low cost. This paper presents a novel methodology for additive manufacturing of RIS elements (AMoRE). AMoRE provides a detailed description of the production process of 3D-printed elements of the surface, including dielectric material characterization and waveguide design for measurement. An experimental and simulation comparison of traditional and 3D-printed elements of the surface demonstrates that the latter increases the bandwidth by 40% and reduces losses, being five times cheaper and having the same thickness. The results highlight the potential of additive manufacturing to enable rapid and cost-effective prototyping of the surfaces compared with traditional methods. |
| format | Article |
| id | doaj-art-a6d9cbb48fe94761b27449f5f2299c62 |
| institution | Kabale University |
| issn | 2169-3536 |
| language | English |
| publishDate | 2025-01-01 |
| publisher | IEEE |
| record_format | Article |
| series | IEEE Access |
| spelling | doaj-art-a6d9cbb48fe94761b27449f5f2299c622025-08-25T23:12:58ZengIEEEIEEE Access2169-35362025-01-011314545114546310.1109/ACCESS.2025.359859611123852AMoRE: Additive Manufacturing of RIS ElementsAndrey Tyarin0Kirill Glinskiy1https://orcid.org/0000-0002-4251-0485Roman Zlobin2https://orcid.org/0000-0003-4164-6054Aleksey Kureev3https://orcid.org/0000-0001-8657-0773Evgeny Khorov4https://orcid.org/0000-0001-5541-4671Wireless Networks Laboratory, Institute for Information Transmission Problems of the Russian Academy of Sciences, Moscow, RussiaWireless Networks Laboratory, Institute for Information Transmission Problems of the Russian Academy of Sciences, Moscow, RussiaWireless Networks Laboratory, Institute for Information Transmission Problems of the Russian Academy of Sciences, Moscow, RussiaWireless Networks Laboratory, Institute for Information Transmission Problems of the Russian Academy of Sciences, Moscow, RussiaWireless Networks Laboratory, Institute for Information Transmission Problems of the Russian Academy of Sciences, Moscow, RussiaA deep investigation of Reconfigurable Intelligent Surfaces (RIS) and Holographic MIMO (H-MIMO) surfaces in 5G and beyond systems requires numerous tests with various prototypes. Traditional prototyping of these surfaces relies on expensive or time-consuming printed circuit board technologies. Alternatively, additive manufacturing, particularly 3D-printing, offers rapid prototyping of radio frequency components with sophisticated geometry and low cost. This paper presents a novel methodology for additive manufacturing of RIS elements (AMoRE). AMoRE provides a detailed description of the production process of 3D-printed elements of the surface, including dielectric material characterization and waveguide design for measurement. An experimental and simulation comparison of traditional and 3D-printed elements of the surface demonstrates that the latter increases the bandwidth by 40% and reduces losses, being five times cheaper and having the same thickness. The results highlight the potential of additive manufacturing to enable rapid and cost-effective prototyping of the surfaces compared with traditional methods.https://ieeexplore.ieee.org/document/11123852/5G3D-printingantenna fabricationRISH-MIMOwaveguide |
| spellingShingle | Andrey Tyarin Kirill Glinskiy Roman Zlobin Aleksey Kureev Evgeny Khorov AMoRE: Additive Manufacturing of RIS Elements IEEE Access 5G 3D-printing antenna fabrication RIS H-MIMO waveguide |
| title | AMoRE: Additive Manufacturing of RIS Elements |
| title_full | AMoRE: Additive Manufacturing of RIS Elements |
| title_fullStr | AMoRE: Additive Manufacturing of RIS Elements |
| title_full_unstemmed | AMoRE: Additive Manufacturing of RIS Elements |
| title_short | AMoRE: Additive Manufacturing of RIS Elements |
| title_sort | amore additive manufacturing of ris elements |
| topic | 5G 3D-printing antenna fabrication RIS H-MIMO waveguide |
| url | https://ieeexplore.ieee.org/document/11123852/ |
| work_keys_str_mv | AT andreytyarin amoreadditivemanufacturingofriselements AT kirillglinskiy amoreadditivemanufacturingofriselements AT romanzlobin amoreadditivemanufacturingofriselements AT alekseykureev amoreadditivemanufacturingofriselements AT evgenykhorov amoreadditivemanufacturingofriselements |